a2nr
/
velxio
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
velxio/frontend/src/__tests__
History
David Montero Crespo b35b5aead4 fix(firmware): explain the blank-NVS WiFi failure, and detect WiFi in stripped images (#270) 
The reporter sent his three Visuino binaries, and running them settles what his
error was. It was never the network name, and it was not his delay() theory
either.

His first binary reproduces his exact report on the in-browser engine —
`[40][E][STA.cpp:357] connect(): STA connect failed! 0x300a: ESP_ERR_WIFI_SSID`,
timestamps and all — and his latest binary connects and prints its lease, the
same `NAN WiFi stop` line and IP his real-hardware screenshot shows. Same
emulator, same day. The difference is inside the firmware: the failing build
reaches esp_wifi_connect with no usable SSID, and a sketch calling
WiFi.begin() with NO arguments on this simulator produces his error verbatim —
verified. On his real DevKit that same call works, because begin() with no
credentials reuses whatever some earlier firmware saved in NVS, and his chip's
flash had a network in it. The simulator's flash starts blank. Nothing in the
output said any of that, and it cost him days.

So the serial monitor now says it: when `0x300a: ESP_ERR_WIFI_SSID` scrolls
past, one [velxio] line explains the NVS mechanism and gives the literal fix
(`WiFi.begin("Velxio-GUEST", "")`). Wired at the serial batcher, which both
backends feed; it fires once per run, re-arming naturally because a fresh run
starts a fresh log. The delay() theory was measured and does not hold — the
same sketch with and without delay(1) both associate, 48s vs 52s on the
engine, 8.0s vs 8.2s on QEMU.

His binaries also exposed d64b6796's detection as built on sand: it keyed on
Arduino's log strings ('WiFiGeneric', 'STA.cpp'), which vanish when a build
lowers its debug level — his latest image contains neither, so the note would
have stayed silent on precisely the firmware it was written for. The markers
are now IDF driver names (net80211, phy_init, esp_wifi, wifi_init), chosen by
measuring a blink build against a WiFi build: each is absent from the former
and present in the latter. WIFI_INIT looked obvious and is in BOTH, so it is
not on the list. Checked against all three of his images: WiFi detected, his
correct SSID found, note rightly silent.

Separate finding, out of scope here: his merged images reboot-loop on the QEMU
machine (flash-init assert). His build carries CONFIG_SPIRAM=y — the core 3.x
precompiled libs enable it regardless of the PSRAM=disabled menu choice — and
our own build with PSRAM enabled fails the same way on QEMU, which models no
PSRAM chip ('PSRAM ID read error: 0x00000000'). velxio.dev routes ESP32 to the
in-browser engine, where his images run, so this affects only the self-hosted
QEMU path.
 		2026-08-26 04:51:16 +02:00
..
__snapshots__ fix(examples): the common-emitter amplifier never left cutoff 2026-08-17 15:21:24 +02:00
fixtures fix(trace): recognise runtime boards and same-hole junctions in pin tracing 2026-07-20 18:46:23 +02:00
helpers fix(stop): preserve display state on Stop, only blank on Reset 2026-05-26 18:54:17 +02:00
AVRSimulator.test.ts fix(sim): keep PwmCallback 2-arg compatible via arity dispatch 2026-06-11 03:29:44 -03:00
PinManager.test.ts fix(sim): keep PwmCallback 2-arg compatible via arity dispatch 2026-06-11 03:29:44 -03:00
RP2040Simulator.test.ts
…
SignalRouter.test.ts fix(esp32): LEDC signal IDs are 71-86 per ESP32 TRM, not 72-87 2026-05-17 05:42:52 +02:00
ammeter-waveform.test.ts feat(sim): Phase 1c G+F3 — retire legacy CircuitScheduler / eecircuit-engine 2026-05-15 21:46:34 +02:00
arduino-arduino-spi.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
arduino-esp32-uart.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
arduino-pico-digital.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
arduino-pico-i2c.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
arduino-pico-mixed-uart.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
attiny85-simulation.test.ts fix(sim): correct ATtiny85 Timer0 PWM register addresses 2026-06-19 04:23:41 +02:00
avr-uart-tx-waveform.test.ts feat(avr/uart): synthesize bit-level TX waveform on PD1/PE1 2026-05-22 19:49:43 +02:00
bjt-common-emitter-behaviour.test.ts fix(examples): the common-emitter amplifier never left cutoff 2026-08-17 15:21:24 +02:00
board-compile-stale.test.ts flash: compile before flashing, stale-build warning, i18n dialog, entitlement seam (#207) 2026-08-18 20:21:57 +02:00
board-kinds-coverage.test.ts refactor(examples): move Pico W WiFi examples to the pro overlay seam 2026-06-15 15:54:44 +02:00
board-pin-mapping.test.ts fix(boards): pads that resolved to nothing, and supply pads that drove a GPIO 2026-08-21 06:12:24 +02:00
board-protocols-audit.test.ts fix(interconnect): classify Arduino Mega UART/I2C function-label pins 2026-06-12 08:29:03 +02:00
board-removal-running-reconcile.test.ts refactor(sim): single-board example load rebuilds from scratch 2026-05-31 23:23:41 +02:00
board-seed-code.test.ts feat(boards): a board can ship the code it opens with 2026-08-18 15:02:13 +02:00
board-sensor-controls.test.ts feat(simulator): tilt and battery controls for boards that carry an IMU or a gauge 2026-08-09 23:48:56 +02:00
breadboard-nets.test.ts feat: breadboard (full 830-point) + mini breadboard (170-point) parts 2026-07-15 21:50:36 +02:00
breadboard-occupancy.test.ts feat(breadboard): one-hole-one-wire selection rules + jumper colors 2026-07-21 05:49:23 +02:00
breadboard-seating.test.ts fix(breadboard): derive seating at element mount — closes run-before-seating race 2026-07-20 17:39:29 +02:00
breadboard-snap.test.ts feat(breadboard): hover-gated labels + full-footprint seating solver 2026-07-19 05:28:40 +02:00
buzzer-metronome.test.ts fix(sim): monophonic buzzer guard — replace note on pitch change (no stacking) 2026-06-11 02:35:33 -03:00
capacitor-charge-transient.test.ts feat(sim): Phase 1d #3 + #5 — WASM pre-boot on mount + delete dead wire* utils 2026-05-15 22:24:31 +02:00
chipbus-buskernel.test.ts feat(chipbus): Phase 2 - synchronous settle kernel (settle-before-read) 2026-06-05 02:36:54 -03:00
chipbus-buslogic.test.ts feat(chipbus): Phase 1 - 4-valued logic + drive-strength tri-state buses 2026-06-05 02:18:47 -03:00
chipbus-busnets.test.ts feat(chipbus): Phase 1 - 4-valued logic + drive-strength tri-state buses 2026-06-05 02:18:47 -03:00
chipbus-galaksija-boot.test.ts test(chipbus): a real Galaksija (1983 Z80 home computer) boots over the bus 2026-06-05 11:55:28 -03:00
chipbus-galaksija-computer.test.ts feat(chipbus): Galaksija home computer gallery example + browser perf throttle 2026-06-05 13:49:33 -03:00
chipbus-galaksija-display-snoop-race.test.ts fix(chipbus): Galaksija boots + displays + types live in the browser 2026-06-05 15:47:30 -03:00
chipbus-galaksija-display.test.ts feat(chipbus): Galaksija home computer gallery example + browser perf throttle 2026-06-05 13:49:33 -03:00
chipbus-galaksija-keyboard.test.ts feat(chipbus): Galaksija keyboard - type BASIC over the bus 2026-06-05 14:37:42 -03:00
chipbus-galaksija-ram-display.test.ts fix(chipbus): Galaksija boots + displays + types live in the browser 2026-06-05 15:47:30 -03:00
chipbus-galaksija-reset-race.test.ts fix(chipbus): Galaksija boots + displays + types live in the browser 2026-06-05 15:47:30 -03:00
chipbus-netkey.test.ts feat(chipbus): Phase 0 - net-identity shared key for chip-to-chip buses 2026-06-05 01:18:08 -03:00
chipbus-twochip-integration.test.ts feat(chipbus): Phase 1 - 4-valued logic + drive-strength tri-state buses 2026-06-05 02:18:47 -03:00
chipbus-z80-ram-decode.test.ts test(chipbus): Phase 3 core - Z80 + ROM + RAM + address decode over the bus 2026-06-05 10:23:57 -03:00
chipbus-z80-rom-boot.test.ts test(chipbus): live proof - a real Z80 boots from a ROM over the bus 2026-06-05 10:07:26 -03:00
circuit-simulation-service.test.ts fix(sim): stop dropping sibling pin edges — only bit 0 of a multi-pin write reached the canvas 2026-08-16 20:02:58 +02:00
circuit-verifier-nonfinite.test.ts fix(sim): circuit verifier was silently blind to current faults in prod 2026-06-17 20:37:32 +02:00
circuit-verifier-p1-audit.test.ts verify: catch unpowered nets, open source loops, and relay coil voltage mismatch 2026-07-31 20:38:23 +02:00
circuit-verifier.test.ts fix(spice): per-voltage supply rails — VIN/5V no longer clamped to the 3.3V logic rail 2026-08-15 08:29:39 +02:00
component-metadata-bmp280.test.ts
…
component-to-spice.test.ts fix(sim): the other models that own a pad, and a button with no circuit 2026-08-23 08:18:18 +02:00
components-metadata-integrity.test.ts refactor(examples): move Pico W WiFi examples to the pro overlay seam 2026-06-15 15:54:44 +02:00
digitalgate-engine-examples.test.ts feat(digital-gate-engine): 4-bit ripple counter gallery example + sequential controller fix 2026-06-05 21:58:42 -03:00
digitalgate-kernel.test.ts feat(digital-gate-engine): evaluate logic gates on the event-driven kernel 2026-06-05 20:21:33 -03:00
digitalgate-mixed-boundary.test.ts fix(sim): model slide-switch as a real SPDT + tie ESP32 dual 3V3/5V pins to the rail 2026-07-09 18:58:12 +02:00
digitalgate-sequential.test.ts fix(sim): model slide-switch as a real SPDT + tie ESP32 dual 3V3/5V pins to the rail 2026-07-09 18:58:12 +02:00
digitalgate-sweep.test.ts feat(digital-gate-engine): sweep all 38 examples + default the flag on 2026-06-05 20:29:32 -03:00
drop-slot.test.ts fix(canvas): boards added from the picker land in the visible corner like components 2026-08-18 04:39:24 +02:00
dual-arduino-digital.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
dual-arduino-hw-uart.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
dual-arduino-multi-protocol.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
dual-arduino-software-serial.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
dual-esp32-uart.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
dual-pico-digital.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
dual-pico-multi-protocol.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
dual-pico-serial-passthrough.test.ts feat(pi): salida de pantalla para las Pi + arreglo del guard de connect 2026-07-30 01:09:04 +02:00
editor-commands.test.ts feat(editor): menus File/Edit en la cabecera y editor sin nav de marketing 2026-07-30 16:26:36 +02:00
eeprom.test.ts fix(sim): emulate AVR EEPROM (fixes #203) 2026-06-16 04:18:51 +02:00
epaper-part-integration.test.ts
…
esp32-breadboard-display.test.ts fix(trace): recognise runtime boards and same-hole junctions in pin tracing 2026-07-20 18:46:23 +02:00
esp32-dht22-flow.test.ts fix(esp32): force clean reconnect in Esp32Bridge.connect() — the real run-after-agent fix 2026-07-21 07:01:05 +02:00
esp32-integration.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
esp32-multi-servo-gpio-matrix.test.ts refactor(esp32): retire ledc_update + broadcastPwm + channelGpioMemo 2026-05-19 04:05:34 +02:00
esp32-rectifier-integration.test.ts
…
esp32-servo-pot.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
esp32-uart-classify.test.ts fix(interconnect): classify ESP32 UART pin names so multi-board Serial works 2026-06-12 07:21:47 +02:00
esp32-wifi-bluetooth.test.ts fix(micropython): stop shadowing the real WiFi driver when a NIC exists 2026-08-10 21:40:58 +02:00
esp32-wifi-compile.test.ts
…
esp32-wifi-webserver-integration.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
esp32c3-blink.test.ts fix(tests): update mocks + assertions for PinManager API changes 2026-05-19 04:52:30 +02:00
esp32c3-simulation.test.ts fix(tests): update mocks + assertions for PinManager API changes 2026-05-19 04:52:30 +02:00
esp32c3-wifi-bluetooth.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
example-component-values.test.ts test(examples): audit every shipped component value against physical ranges 2026-08-17 03:47:39 +02:00
examples-all-buckets-smoke.test.ts refactor(examples): move Pico W WiFi examples to the pro overlay seam 2026-06-15 15:54:44 +02:00
examples-analog-live.test.ts feat(sim): Phase 1d #2 + #9 — convergence helpers in Worker + enable LM358 subckt 2026-05-15 22:17:06 +02:00
examples-analog.test.ts feat(sim): Phase 1d #2 + #9 — convergence helpers in Worker + enable LM358 subckt 2026-05-15 22:17:06 +02:00
examples-circuits.test.ts
…
examples-digital.test.ts fix(sim): model slide-switch as a real SPDT + tie ESP32 dual 3V3/5V pins to the rail 2026-07-09 18:58:12 +02:00
examples-gallery-smoke.test.ts feat(sim): Phase 1d #1 — gallery smoke test imports real examples + shared helper 2026-05-15 22:11:28 +02:00
examples-led-resistor.test.ts test(examples): ningun LED de la galeria puede colgar directo de un pin 2026-07-29 07:24:25 +02:00
examples-netlist-snapshot.test.ts refactor(examples): move Pico W WiFi examples to the pro overlay seam 2026-06-15 15:54:44 +02:00
examples-pico-doom.test.ts
…
fat-image.test.ts feat(sd): source files stay off the card - only project DATA files auto-copy 2026-08-04 19:58:31 +02:00
firmware-loader.test.ts
…
flip-flop-parts.test.ts
…
gallery-run-gate.audit.test.ts fix(adc,examples): mapa ADC por chip, entradas flotantes y una auditoria de la galeria 2026-07-27 05:01:49 +02:00
gps-neo6m.test.ts feat(components): DS3231 RTC module + GPS NEO-6M NMEA talker 2026-07-31 20:38:06 +02:00
hcsr04-divider-echo.test.ts fix(sim): a resistor divider on a sensor line made the board pin invisible 2026-08-22 23:31:23 +02:00
header-strip-fit.test.ts fix(editor): the toolbar strip's label collapse is measured too, and each layout is judged by its own widths 2026-08-18 05:49:45 +02:00
i2c-complex-scenarios.test.ts
…
i2c-esp32-multiboard-bridge.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
i2c-esp32-real-firmware.test.ts
…
i2c-interconnect-bridge.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
i2c-lcd-coupling-gap.test.ts
…
i2c-multi-board-slave-gap.test.ts
…
i2c-real-firmware.test.ts
…
install-libraries.test.ts
…
instruments.test.ts
…
integration.test.ts
…
interactive-parts.test.ts
…
interconnect-routing.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
issue-122-micropython-esp32.test.ts
…
issue-139-espidf-mode.test.ts feat(esp32): pure ESP-IDF language mode for the ESP32 family (#139) 2026-07-24 06:37:01 +02:00
issue-219-micropython-upload.test.ts fix(micropython): upload a project's libraries in bounded steps (#219) 2026-08-21 20:03:24 +02:00
issue-268-project-roundtrip.test.ts fix(project): export the board you actually have, import the board the file names (#268) 2026-08-22 06:07:45 +02:00
issue-270-firmware-wifi-note.test.ts fix(firmware): explain the blank-NVS WiFi failure, and detect WiFi in stripped images (#270) 2026-08-26 04:51:16 +02:00
key-button-bindings.test.ts feat(simulator): map pushbuttons to keyboard keys 2026-07-18 04:02:01 +02:00
library-compile.integration.test.ts refactor(examples): move Pico W WiFi examples to the pro overlay seam 2026-06-15 15:54:44 +02:00
library-manifest.test.ts feat(libraries): manifest auto-migration + name-affinity ranking + install-declares 2026-08-04 06:03:32 +02:00
load-example-transitions.test.ts feat(sim): Stop halts custom chips + LEDs go dark; retro chip examples go board-less 2026-06-04 04:32:44 +02:00
load-ngspice-for-node.test.ts
…
log-lux-slider.test.ts fix(sensors): illumination sliders are logarithmic, like the quantity they set 2026-08-18 22:42:25 +02:00
logic-families.test.ts
…
logic-gate-parts.test.ts
…
mcu-edge-pin-name-mapping.test.ts fix(spice): MCU-edge listeners detach on resubscription for QEMU boards (frozen LEDs) 2026-07-24 07:26:09 +02:00
mega-emulation.test.ts fix(sim): keep PwmCallback 2-arg compatible via arity dispatch 2026-06-11 03:29:44 -03:00
micropython-libs-service.test.ts feat(micropython): install libraries from the micropython-lib index (#214) 2026-08-18 21:50:10 +02:00
microsd-real-firmware.test.ts feat(microsd): SD-over-SPI card storage for AVR, RP2040 and ESP32 2026-06-11 03:59:53 +02:00
mixed-mode-bjt-switch-integration.test.ts feat(sim): Phase 1c G+F3 — retire legacy CircuitScheduler / eecircuit-engine 2026-05-15 21:46:34 +02:00
mixed-mode-scheduler.test.ts
…
motor-parts.test.ts
…
multi-board-integration.test.ts fix(editor): sync active file group when the active board changes 2026-06-26 23:03:50 +02:00
netlist-builder.test.ts fix(spice): per-voltage supply rails — VIN/5V no longer clamped to the 3.3V logic rail 2026-08-15 08:29:39 +02:00
new-project-starter-sections.test.ts feat(editor): M5Stack section (Cardputer ADV, Core) ahead of STM32 in the starter dialog 2026-08-17 18:50:37 +02:00
ngspice-interactive.test.ts
…
ngspice-node-adapter.test.ts
…
oscilloscope-trigger.test.ts feat(scope/trigger): add Auto / Normal / Single-shot trigger modes 2026-05-22 21:11:03 +02:00
overlay-espidf-mode.test.ts fix(boards): an overlay board could never enter ESP-IDF mode 2026-08-24 06:11:24 +02:00
overlay-pi-family-example.test.ts fix(boards): a QEMU-Linux overlay board is not a Raspberry Pi 2026-08-25 19:22:29 +02:00
part-pin-ownership.test.ts fix(sim): the other models that own a pad, and a button with no circuit 2026-08-23 08:18:18 +02:00
part-simulators-coverage.test.ts test(sim): Phase 1d-tests E + F — part simulator coverage + solver determinism 2026-05-15 23:10:05 +02:00
phase-2-device-models.test.ts
…
phase-2-lm358-subckt.test.ts
…
phase-4-wire-resistance.test.ts
…
pi-linux-mode-restart.test.ts fix(pi): arrancar sin bridge deja de fallar en silencio + test del reinicio 2026-07-29 20:10:57 +02:00
pi-single-board-examples.test.ts feat(examples): add single-board Raspberry Pi 3/4/5 GPIO examples 2026-06-02 04:36:58 +02:00
pi-uart-wire.test.ts fix(uart): la Pi puede hablar por serie con la placa de al lado 2026-07-29 07:40:13 +02:00
pi3-pico-uart.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
piSlaveScanner.test.ts feat(pi): pluggable slave handler + canvas wire detection for I2C/SPI/UART 2026-05-18 16:26:37 +02:00
pin-inspector-layout.test.ts fix(ui): a column is a RUN of pads, not two opposite ends of the board 2026-08-04 03:01:21 +02:00
pin-position-rotation.test.ts feat(breadboard): green dots on pins plugged into a breadboard 2026-07-20 04:48:16 +02:00
pin-resolver-phase1b.test.ts
…
pin-resolver.test.ts
…
pin-trace-boards.test.ts fix(sim): a net is a set of pins, and a part's own line belongs to the part 2026-08-23 01:23:41 +02:00
pin-trace-precedence.test.ts test(pin-trace): guard the scaling the wire index buys, not a stopwatch 2026-08-23 05:37:46 +02:00
pro-board-adc-pins.test.ts fix(spice): overlay boards were skipped before a single volt was injected 2026-08-22 05:13:41 +02:00
pro-board-power-rails.test.ts fix(spice): every overlay board was solved as a 5 V Arduino 2026-08-23 03:07:43 +02:00
pro-examples-settled.test.ts fix(examples): el enlace directo a un ejemplo pro ya no parpadea un 404 2026-07-30 17:06:05 +02:00
pro-hardware-serial-seam.test.ts feat(serial): hardware-serial seams for the pro Web Serial monitor 2026-08-11 21:23:56 +02:00
pro-web-flash-seam.test.ts feat(flash): MicroPython web-flash seam (firmware install + raw-REPL upload) 2026-08-11 22:55:47 +02:00
protocol-parts.test.ts feat(components): DS3231 RTC module + GPS NEO-6M NMEA talker 2026-07-31 20:38:06 +02:00
rp2040-pio-servo.test.ts
…
rp2040-realtime.test.ts fix(rp2040): keep delay()-based sketches real-time on slower hosts 2026-06-10 18:21:29 +02:00
runtime-burnout.test.ts feat(sim): P4 runtime burnout for resistors + electrolytic capacitors 2026-06-18 04:35:56 +02:00
sd-card-gate.test.ts feat(microsd): SD-over-SPI card storage for AVR, RP2040 and ESP32 2026-06-11 03:59:53 +02:00
sensor-parts.test.ts fix(ntc): the temperature sensor read wrong on 3.3V boards, and three examples decoded backwards 2026-08-03 07:33:20 +02:00
serial-batching.test.ts
…
shim-raw-serial-bytes.test.ts fix(sim): a raw-byte UART seam, because feedUart is UTF-8 2026-08-21 07:37:36 +02:00
simulation-parts.test.ts fix(7segment): rebuild per-element sim state when the digit count changes 2026-07-21 15:16:56 +02:00
simulation.test.ts
…
solver-determinism.test.ts test(sim): Phase 1d-tests E + F — part simulator coverage + solver determinism 2026-05-15 23:10:05 +02:00
solver-perf-baseline.test.ts test(sim): Phase 1d-tests D + G — board-kind coverage matrix + perf baseline 2026-05-15 23:13:48 +02:00
solver-port-contract.test.ts
…
spice-ac.test.ts
…
spice-active.test.ts
…
spice-avr-mixed.test.ts
…
spice-digital.test.ts
…
spice-model-coverage.test.ts fix(sim): the other models that own a pad, and a button with no circuit 2026-08-23 08:18:18 +02:00
spice-mosfet-diag.test.ts
…
spice-mosfet-pwm.test.ts
…
spice-npn-switch-diag.test.ts
…
spice-npn-switch-integration.test.ts
…
spice-passive.test.ts
…
spice-rectifier-integration.test.ts feat(sim): Phase 1c G+F3 — retire legacy CircuitScheduler / eecircuit-engine 2026-05-15 21:46:34 +02:00
spice-rectifier-live-repro.test.ts feat(sim): Phase 1c G+F3 — retire legacy CircuitScheduler / eecircuit-engine 2026-05-15 21:46:34 +02:00
spice-relaxation-oscillator.test.ts
…
spice-relay-integration.test.ts
…
spice-signal-generator-tran.test.ts feat(sim): Phase 1c G+F3 — retire legacy CircuitScheduler / eecircuit-engine 2026-05-15 21:46:34 +02:00
spice-slide-switch-spdt-repro.test.ts fix(sim): model slide-switch as a real SPDT + tie ESP32 dual 3V3/5V pins to the rail 2026-07-09 18:58:12 +02:00
spice-smoke.test.ts
…
spice-transient.test.ts
…
ssd168x-decoder.test.ts feat(epaper): 4-level greyscale rendering in SSD168xDecoder 2026-08-06 03:56:02 +02:00
ssd1306-render.test.ts fix(sim): SSD1306 page-addressing mode (Tiny4kOLED/U8g2 OLED garbled) 2026-06-19 18:08:01 +02:00
triple-pico-digital-chain.test.ts feat(opencore): extract Pico W WiFi to a pluggable PIO peripheral seam 2026-06-15 08:33:28 +02:00
uc8159c-decoder.test.ts
…
undo-redo.test.ts fix(simulator): wire colour change from UI was a no-op (recordUpdateWire applyNow) 2026-06-19 19:49:12 +02:00
usi-i2c-ack.test.ts fix(sim): drive the slave ACK in the USI I2C bridge (blank SSD1306 on ATtiny85) 2026-08-11 05:19:31 +02:00
virtual-i2c-devices.test.ts
…
voltmeter-waveform.test.ts feat(sim): Phase 1c G+F3 — retire legacy CircuitScheduler / eecircuit-engine 2026-05-15 21:46:34 +02:00
waveform-stats.test.ts
…
wire-auto-route.test.ts fix(router): escape corridors for endpoint-in-obstacle + checked-elbow parity 2026-07-20 21:35:58 +02:00
wire-path.test.ts feat(wires): fuse sub-pixel jogs + snap segment drags to the wire's own runs 2026-07-18 05:39:37 +02:00
wire-reroute.test.ts fix(router): escape corridors for endpoint-in-obstacle + checked-elbow parity 2026-07-20 21:35:58 +02:00