The three modal dialogs that fire during the editor's routine save +
share + auth-required flows are now fully localised across all 9
locales.
LoginPromptModal
- Title, body, and the three buttons (Sign in / Create account /
Cancel). Sign in / Sign up Links use localize() so a Spanish
reader prompted to log in lands at /es/login rather than dropping
back to English.
SaveProjectModal
- Title (toggles between Save / Update), name + description fields
with placeholders, save button (toggles between Save / Update /
Saving…), Cancel button.
- Visibility toggle: Public / Private label + hint copy under the
icon.
- All four error paths now go through t() with a {{status}}
interpolation for the generic HTTP failure message.
ShareModal
- Title, public/private label + hint pair, "Make private" /
"Make public" toggle, Copy button, the warning shown when the
project is private, and the Close button.
Hand-curated translations for all 8 non-English locales. Status
codes (403) and shortcut markers preserved.
The project save/load pipeline only persisted a single `board_type`, so
multi-board workspaces silently lost every board except the active one
on save, and wires referencing the dropped boards' IDs orphaned to the
canvas corner on reload. An audit of the production backup found 74/306
projects (24%) with at least one orphaned wire and 174/301 non-trivial
projects whose code was still the default Blink template — strong signal
that users save once and never re-save.
Backend
- Add `boards_json` column on `projects` with idempotent ALTER TABLE in
the lifespan migration list.
- New `FileGroup` schema + `file_groups` array on
ProjectCreate/Update/Response. Legacy `files`/`code` kept for back-compat.
- `project_files.py` now uses `{pid}/{groupId}/{filename}` subdirs via
`read_groups`/`write_groups`. Legacy flat layouts are auto-promoted on
read; legacy single-list `files` only updates the active group, leaving
other boards' files intact.
- `_persist_files_from_body` honors file_groups → files → code priority.
Frontend
- `useSimulatorStore.addBoard` accepts an optional `explicitId` so
saved board IDs can be restored verbatim (wires reference IDs literally).
- New `loadProjectState({boards, fileGroups, components, wires,
activeBoardId})` action: tears down current boards, recreates from the
payload, restores file groups atomically, recalculates wire positions
on the next frame, and refreshes the Interconnect.
- `useEditorStore.replaceFileGroups` for atomic multi-group restore.
- `SaveProjectModal` and `ProjectByIdPage`/`ProjectPage` now go through
`buildSavePayload` / `buildLoadPayload` (handles pre-backfill projects
by synthesising a default board from `board_type`).
Auto-save (#useAutoSaveProject hook)
- 2.5s debounced silent PUT triggered ONLY when an authenticated user
has a `currentProject` with a UUID. State hash detects real changes
vs. UI-only churn; baseline is reset on project load so the just-loaded
state isn't immediately re-saved.
- `beforeunload` flush via `fetch keepalive: true` (supports PUT +
credentials, survives unload).
- Compact status indicator in `AppHeader` (idle/dirty/saving/saved/error).
Backfill script (one-off, idempotent)
- `backend/scripts/backfill_boards_2026_05.py` populates `boards_json`
for legacy projects. Heuristic per project, based on which board IDs
the wires reference:
Case A — wires only ref 'arduino-uno' but board_type ≠ uno:
rename id→board_type and rewrite wire endpoints.
Case B — single-board normal: keep verbatim.
Case C — multi-board: recreate one board per distinct ref, infer
kind by stripping trailing -N suffix.
Also moves any flat files into the active board's group subdir.
Stdlib-only, runs from host or `docker exec`.
Docker
- `Dockerfile.standalone` now copies `backend/scripts/` into the image
so the backfill is callable via `docker exec velxio-app python
/app/scripts/backfill_boards_2026_05.py --apply`.
Verified locally on the restored production backup (363 projects):
33 Case A, 316 Case B, 14 Case C, 135 wire endpoints renamed, 0 orphans.
Re-running the script after apply skips all 363 (idempotent).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
Two bugs causing "can't save project" reports:
1. SaveProjectModal: validate currentProject.id is a real UUID before
calling updateProject. If id is "none" or any non-UUID string, fall
through to createProject instead, avoiding PUT /api/projects/none.
2. ProjectByIdPage: call clearCurrentProject() when the project fetch
fails (404/403/error). Prevents stale project IDs from a previous
session polluting the store and triggering spurious update calls.
Two bugs fixed:
1. SaveProjectModal was reading from the legacy global `files` array instead
of the active board's file group, causing projects to be saved with the
wrong board_type (e.g. 'arduino-uno' for ESP32 projects).
Now reads from fileGroups[activeBoard.activeFileGroupId] and uses
activeBoard.boardKind for board_type.
2. Error handling was always showing "Save failed." — now shows:
- "Server unreachable. Check your connection and try again." for network errors
- "Not authenticated. Please log in and try again." for 401 responses
- The server's detail message (with status code) for other errors
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Implemented ExampleLoaderPage to load examples by ID from the URL.
- Added ExampleLoaderPage route to App component.
- Created ShareModal for sharing project links with visibility toggle.
- Updated UserProfilePage to include share button for user projects.
- Enhanced ExamplesGallery with a copy link button for examples.
- Introduced utility function loadExample to streamline example loading and library installation.
- Updated project visibility management in useProjectStore.
- Added styles for new components and buttons.
- Updated .gitignore to include Arduino compilation byproducts.
- Added tracking for simulation events: start, stop, and reset.
- Implemented tracking for library manager interactions, including library installations.
- Enhanced project management tracking with save and create project events.
- Integrated tracking for user authentication events: sign-up and login.
- Added tracking for CTA clicks on landing and SEO pages.
- Updated analytics utility functions to support new tracking events.
- Improved GitHub and Discord link tracking in the app header.
- Refactored existing components to utilize new tracking functions for better user engagement insights.
Backend:
- project_files.py: read/write sketch files to /app/data/projects/{id}/
- GET /api/projects/{id}: load project by ID (public = anyone, private = owner only)
- create/update write files to disk volume; delete removes them
- ProjectResponse includes files[] list loaded from disk
Frontend:
- /project/:id canonical route -> ProjectByIdPage
- ProjectPage (legacy /:username/:slug) redirects to /project/:id after load
- SaveProjectModal sends files[] and navigates to /project/{id} after save
- DATA_DIR env var in both compose files
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add LoginPage and RegisterPage for user authentication.
- Create UserProfilePage to display user projects.
- Implement ProjectPage for viewing and editing individual projects.
- Introduce authService for handling user login, registration, and session management.
- Add projectService for managing project data retrieval and manipulation.
- Enhance EditorPage with file management capabilities and save prompts.
- Introduce Zustand stores for managing authentication, editor state, and project state.
- Add reserved usernames utility to prevent certain usernames during registration.
- Update compilation service to handle multiple files for Arduino sketches.
David Montero Crespo
copilot-swe-agent[bot]