- Implement UC8159cDecoder for handling 7-colour ACeP panels.
- Introduce painting functions for UC8159c frames in EPaperPart.
- Update EPaperPart to handle both SSD168x and UC8159c frame types.
- Add integration tests for EPaperPart and UC8159cDecoder.
- Create example sketch for 5.65" ACeP 7-colour panel.
- Enhance error handling in test cases for library dependencies.
- Introduced EPaperPanels.ts to define configurations for various ePaper panels including dimensions, refresh rates, and controller details.
- Implemented SSD168xDecoder.ts to handle the decoding of SPI commands for the SSD168x family of ePaper displays.
- Created EPaperPart.ts to manage the simulation of ePaper panels, integrating with the existing simulator architecture and handling events.
- Added example sketches for 2.13", 2.9", 4.2", and 7.5" ePaper displays, demonstrating basic functionality and text rendering.
- Ensured compatibility with AVR, RP2040, and ESP32 platforms, with appropriate pin configurations for each.
- Added tcp_nat.py to handle TCP NAT, implementing the three-way handshake, data flow, and connection state management.
- Introduced udp_nat.py for UDP NAT, managing chip-initiated datagrams and maintaining flow state.
- Created integration tests in test_picow_net_bridge.py to validate the functionality of the TCP and UDP NAT implementations, including ARP, DHCP, ICMP, and DNS interactions.
- Introduced SVG layout dimensions for Phase 1 (B/W mono) and Phase 2 (colour) ePaper panels, detailing active areas, bezels, and pin layouts.
- Developed a phased emulation plan outlining the architecture and deliverables for different panel types, including SSD168x and UC81xx.
- Created a canonical "Hello, World!" sketch for the 1.54" ePaper panel, ensuring compatibility across ESP32, Raspberry Pi Pico, and Arduino Uno.
- Implemented a pure Python SSD168x decoder to validate SPI command sets and framebuffers against specifications.
- Added tests for compiling the hello-world sketch across supported boards and for the SSD168x protocol to ensure correct framebuffer behavior.
- Implemented handshake tests to validate initial bus state and register responses.
- Created end-to-end tests for Pico W LED blinking using MicroPython firmware.
- Added SDPCM framing tests to ensure proper encoding and decoding of control frames.
- Developed IOCTL tests to verify command responses and state changes in the emulator.
- Established a full lifecycle test for WiFi operations, including scanning, connecting, and packet handling.
- Introduced TypeScript configuration for test files to ensure compatibility and strict type checking.
- Implemented `esp32_spi_chip_demo.ino` to demonstrate SPI communication with a 74HC595 shift register.
- Created `esp32_uart_chip_demo.ino` for UART loopback testing with ROT13 transformation.
- Added Python tests for compiling chips and sketches, ensuring valid WASM output and successful compilation for various board families.
- Developed end-to-end tests for ESP32 with custom chips using I2C and SPI, validating synchronous communication through the backend.
- Introduced GPIO bridge tests to verify serial communication and GPIO state changes.
- Ensured all tests validate the expected behavior of the custom chips and their interaction with the ESP32 firmware.
https://github.com/kritishmohapatra/100_Days_100_IoT_Projects
- Introduced `_lib.py` containing shared validators for board support and static source analysis for MicroPython projects.
- Added `conftest.py` to configure pytest for the test suite, simplifying import paths.
- Created `NOT_SUPPORTED.md` files for two projects indicating they cannot be emulated in Velxio due to lack of source code.
- Implemented unit tests for the unsupported projects to verify the presence of the NOT_SUPPORTED marker and source preservation.
Fixes the user-reported bug where two RPi Pico W boards wired GP0↔GP1
running SerialPassthrough don't communicate. Replaces the broken
broadcast-style cross-board logic in addBoard (only routed AVR↔Pi3B,
ignored wires entirely, no RP2040↔anything path) with a wire-aware
Interconnect singleton.
Architecture: digital pin transitions are the lowest-common-denominator
abstraction. Each simulator's hardware peripherals (UART/I2C/SPI) and
bit-banging libraries (SoftwareSerial, software I2C) decode the
transitions naturally — propagate the pin and the protocols come for
free. For cross-process boards (ESP32 backend QEMU, Pi3B QEMU) a
byte-level shortcut is additionally enabled on hardware-UART pin
pairs to handle high-baud links over WebSocket latency.
Implementation:
- New simulation/Interconnect.ts singleton subscribes to wire/board
changes via the Zustand store. Handlers per tier: browser-sim →
pinManager.onPinChange, ESP32 → Esp32Bridge.sendPinEvent, Pi3B →
bridge.sendPinEvent. Re-entrancy guard via per-(board,pin) Set.
- New utils/boardProtocols.ts classifies pins (uart-tx, i2c-sda, etc.)
per board kind, used as optimization hint for the byte shortcut.
- types/wire.ts: added signalType field, exports WireSignalType /
WireColorMap (fixes a pre-existing TS import error in wireColors).
- Deleted the bridgeMap/simulatorMap broadcast forEach blocks in
addBoard. Initial board + future boards register with Interconnect
via setInterconnectRuntime + store subscription.
- PinManager.resetPinStates() helper for test isolation.
Tests (16 new files, 96 tests, all passing):
- Per-pair × per-protocol matrix: dual-arduino-digital,
dual-pico-digital, arduino-pico-digital, triple-pico-digital-chain,
dual-arduino-hw-uart, dual-arduino-software-serial,
arduino-pico-mixed-uart, arduino-esp32-uart, dual-esp32-uart,
pi3-pico-uart, arduino-pico-i2c, arduino-arduino-spi,
interconnect-routing, dual-arduino-multi-protocol (UART+I2C+SPI+
digital + concurrent), dual-pico-multi-protocol (UART0+UART1 alt+
I2C0+I2C1+SPI0+digital + 3-Pico star topology)
- Updated dual-pico-serial-passthrough to assert correct behaviour
- Backend test/multi_board_esp32/test_dual_esp32_serial.py for two
real QEMU instances (skip-graceful when lcgamboa lib absent)
Verified: 1107/1107 tests pass, zero regressions, vite build OK.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Track per-user, per-project, and per-board usage to inform pricing tier
decisions. Adds an admin dashboard with KPIs (DAU/WAU/MAU, totals,
success rate), time-series charts for compiles/runs, board family +
FQBN breakdowns, "board diversity" pie chart (key freemium signal),
top users/projects, and per-country breakdown via Cloudflare's
CF-IPCountry header. Admin can now also view private projects.
Backend:
- New UsageEvent table (append-only event log with user_id, project_id,
event_type, board_fqbn/family, country, error_kind, duration_ms)
- Aggregate counters on User (total_compiles/runs/errors, last_active,
signup_country, last_country) and Project (compile/run/update counts,
last_compiled/run timestamps) kept in sync by MetricsService for O(1)
dashboard reads
- 10 admin endpoints under /api/admin/metrics/{overview, timeseries,
boards, board-diversity, top-users, top-projects, countries,
users/{id}, projects/{id}}
- POST /api/metrics/run for client-side run telemetry
- Country detection via cf-ipcountry header (no DB / no API calls)
- Auto-migrations in lifespan for legacy DBs
Frontend:
- recharts-powered Dashboard tab with KPI cards and 4 charts
- New Boards tab with per-family + per-FQBN breakdown
- Country column with flag emoji on Users tab
- Top countries card on Dashboard
- compileCode now forwards project_id; Run button reports via WS
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
A user (st_stefanov on Discord) reported the manual setup steps clone
avr8js, wokwi-elements, and rp2040js but skip wokwi-boards. The frontend
imports board.svg assets from wokwi-libs/wokwi-boards/boards/* (ESP32
DevKit V1, ESP32-S3, ESP32-C3, Pi Pico W, etc.), so without that repo
the Vite build fails on missing imports.
Dockerfile.standalone:77 already clones it; the README's Option C
(manual setup) was the only path missing the line. wokwi-boards is
asset-only — no npm install or build step needed.
Registers test_esp32_spice_photodiode.mjs (added in the previous commit)
in the ESP32 + ngspice section of the backend e2e workflow, with a 150s
timeout to accommodate ESP32 firmware compile + QEMU boot.
Follows the same pattern as test_esp32_spice_analog.mjs and
test_esp32_spice_ntc_bridge.mjs: compile an ESP32 sketch on-the-fly via
/api/compile/, boot QEMU through the backend WebSocket, and sweep lux
levels while verifying analogRead() returns what ngspice solved.
The netlist uses the exact photodiode cards emitted by
frontend/.../componentToSpice.ts (D_<id> + I_<id>_ph + DPHOTO model), so
any drift in the frontend SPICE mapper surfaces here.
Validated against the live Docker container — lux=0/1000/2500 produce
raw=4095/2854/992, matching the expected 4095/2854/993 within ±1 LSB
and monotonically decreasing with brightness as expected.
The package-lock.json churn is a pre-existing drift: eecircuit-engine
was in package.json but missing from the lock — npm install re-added it.
Companion workflow change (registering the test in backend-e2e-tests.yml)
lives in a separate commit that requires a PAT with workflow scope to push.
Mirrors the /v2 page structure but targets the 2.5 launch: ngspice-WASM
analog simulation, hybrid digital + analog co-simulation with Arduino /
ESP32 / RP2040, expanded component catalog, live instruments, 40 new
analog/hybrid examples.
- Reuses Velxio2Page.css + SEOPage.css — no new stylesheet to maintain
- Adds SoftwareApplication, BreadcrumbList, and FAQPage JSON-LD for
rich-results eligibility
- Registers the route in App, entry-server (SSR prerender), and
seoRoutes (sitemap, priority 0.95 / changefreq weekly)
The SPICE emitter already reads properties.lux (default 500, 100 nA/lux)
but the UI had no way to set it — the static dialog rejected the "range"
control type and there was no entry in SENSOR_CONTROLS for the live panel.
- Add photodiode entry in SENSOR_CONTROLS (slider 0-1000 lux)
- Register a minimal PartSimulationRegistry handler that forwards slider
values via emitPropertyChange so the netlist memo invalidates
- Switch the photodiode lux control from "range" to "number" so the
static ComponentPropertyDialog renders an editable input
Loading an analog-only example removes every board. The single-board
branch of loadExample then called setBoardType, which only maps over
existing entries in boards[] and silently did nothing when the array
was empty — components rendered but no board. Fall back to addBoard +
setActiveBoardId when there are no boards.
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Introduced RelayElements for SPDT relay representation.
- Added Resistor component for adjustable resistance in ohms.
- Created RiscVBoard component for visualizing a RISC-V chip.
- Implemented TransistorElements for BJT and MOSFET packages.
- Added Capacitor and CapacitorElectrolytic elements for capacitors.
- Introduced Inductor element for inductor representation.
- Updated index file to export new custom elements.
- Implemented a script to inject passive-component preset variants into `scripts/component-overrides.json`, including resistors, capacitors, and inductors with custom names and thumbnails.
- Added a new custom element `<wokwi-capacitor-electrolytic>` representing a polarized aluminum-can capacitor with appropriate SVG representation.
- Updated metadata generation to accommodate new component names and thumbnails for better user experience in the component picker.
- Marked submodules `qemu-lcgamboa` and `rp2040js` as dirty to reflect local changes.
- Replaced syncStoreProperty function with emitPropertyChange to decouple parts from Zustand store.
- Updated relay component mapping to ensure proper handling of coil and contact states.
- Added new test cases for half-wave rectifier and relay-controlled LED to ensure correct functionality.
- Introduced InlineComponentSVGs for schematic-style icons of various components.
- Updated submodule references for qemu-lcgamboa, rp2040js, and wokwi-elements to indicate dirty state.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
- Implement `serial-batching.test.ts` to verify the behavior of `createSerialBatcher`, ensuring it coalesces multiple appends into a single flush, preserves byte order, and groups by board.
- Create `spice-rectifier-integration.test.ts` to test the end-to-end functionality of the Half-Wave Rectifier example, covering the entire simulation pipeline from input building to circuit solving.
- Add `spice-rectifier-live-repro.test.ts` to reproduce a live-app failure scenario, tracing through each layer of the simulation to identify potential failure points.
- Introduce `spice-signal-generator-tran.test.ts` to validate the behavior of the signal generator and ensure correct analysis type switching based on circuit components.
- Establish `serialBatcher.ts` to implement a batching mechanism for USART output, reducing the frequency of store updates and preventing React's maximum update depth error.
- Decoupled electrical simulation from the simulator store, ensuring SPICE is always active for accurate circuit analysis.
- Removed feature flag for electrical simulation, simplifying the state management.
- Preloaded SPICE engine at app start to eliminate latency during the first solve.
- Added comprehensive tests for MOSFET PWM LED behavior and NPN transistor switch functionality, ensuring correct current flow and response to pin states.
- Implemented diagnostics for floating input nodes in RC low-pass filter circuits, addressing singular matrix issues in SPICE simulations.
- Introduced active semiconductor metadata registry for better component management and simulation fidelity.
- Updated Vite configuration to force re-bundling of local wokwi-elements after component additions.
Documents 5 issues found in production logs: RPi3 missing QEMU boot
files (51 hits), ESP32-S3 unsupported machine type, WebSocket race
condition, Google OAuth unhandled 400, and the uvicorn keepalive crash
that was mitigated in 8e3c00e.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
fix: increase timeout for compilation requests to 180 seconds
refactor: call recalculateAllWirePositions after loading examples
chore: update subproject commit for rp2040js to dirty state
chore: update subproject commit for wokwi-elements to dirty state
generate-sitemap.mjs was only scanning examples.ts for example IDs using a
textual regex. With the 40 new circuit examples living in a separate file
(examples-circuits.ts), they were missing from the generated sitemap.xml
and therefore invisible to search engines / SSR prerender URL list.
Now the generator reads both source files and merges their example IDs.
Also includes auto-applied formatting changes to generate-component-metadata.ts.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Previously examples.ts pushed to exampleProjects[] after declaration, which
some bundlers can treat as dead code under aggressive tree-shaking. This
also made HMR unreliable when examples-circuits.ts changed.
Now:
const legacyExamples = [...]
export const exampleProjects = [...legacyExamples, ...circuitExamples]
Single immutable export. Guaranteed to include all 150 examples at import
time. The gallery (ExamplesGallery.tsx) and SSR prerender (entry-server.tsx)
both pick up the new circuit examples automatically.
Also adds frontend/src/__tests__/examples-circuits.test.ts with 5 assertions
to catch future regressions (all circuit ids present, no duplicates, valid
required fields, expected categories covered).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Previously uvicorn was launched with `&` while nginx ran with `exec`, so if
the backend crashed (e.g. the `AssertionError` in websockets' keepalive_ping
that took prod down for ~31h), nginx kept the container "up" and every
/api/* request returned 502. Now both processes are monitored with
`wait -n`; whichever dies first triggers the entrypoint to exit, letting
`restart: unless-stopped` recover the container cleanly.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
naweiss
David Montero Crespo