Headless test that drives the REAL RP2040Simulator (attachCyw43 +
installCyw43PioHooks + lockstep PIO stepping in runFrameForTime), boots
the Pico W firmware, injects a WiFi-connect snippet over the raw REPL, and
asserts isconnected(). Result:
PYBOOT
ACTIVE False (this fw's active() getter reports link status)
CONN_OK 192.168.4.2 (DHCP-leased IP, isconnected() == True)
MAINPY_DONE
Reaches link-up in ~31s wall — the production lockstep PIO stepping is
faster than the harness's setTimeout-cranked PIO.
Also fixes a real production bug: the RP2040 logger was
ConsoleLogger(LogLevel.Error) which THROWS on rp2040js unaligned-read
warnings — lwIP reads the IPv4 header at ethernet offset 14 on every
received packet, so WiFi would have crashed on the first DHCP reply.
Now constructed with throwOnError=false.
Gated behind CYW43_PROD_HARNESS=1 (boots real firmware, ~30s).
The Pico W now connects end to end with NO backend: status reaches
CYW43_LINK_UP (3) and network.WLAN().isconnected() returns True.
After association the STA's lwIP broadcasts DHCP DISCOVER and ARPs the
gateway over the cyw43 DATA channel. A self-contained virtual network
(new virtualNet.ts) answers them:
- DHCP DISCOVER -> OFFER, REQUEST -> ACK (Ethernet+IPv4+UDP+BOOTP, valid
IPv4 header checksum, UDP checksum 0), leasing 192.168.4.2 with gateway
192.168.4.1.
- ARP who-has the gateway -> is-at the AP MAC.
On by default (Cyw43EmulatorOptions.virtualNet); pass null when an
external packet bridge owns the network.
Also fixes injectPacket to prepend the 4-byte BDC header that chip->host
DATA frames need (same as the event-frame fix), so injected packets parse.
Boot harness now reports: STEP_CONNECT_CALLED status=3 / POLL 0 status 3
conn True / HARNESS_DONE.
Known: receiving packets triggers ~30 rp2040js unaligned-read warnings
(lwIP reads the IPv4 header at ethernet offset 14); non-fatal here, but
the production RP2040Simulator must use a non-throwing logger.
The Pico W now joins the virtual AP end to end: active(True) returns,
connect() runs the full WPA/SET_SSID sequence, and the link comes up.
Root causes fixed (each blocked the join):
- mcast_list GET returned empty, so the driver read its own request bytes
as the address count (ASCII 'mcas' ~1.9e9) and looped ~2e9 times,
hanging wifi_on. GETs now return a zero-filled buffer of the asked-for
length (count 0 / status 0), never empty.
- Async event frames lacked the 4-byte BDC header the driver expects at
SDPCM header_length, so it read the broadcast-MAC byte as data_offset
and the payload pointed out of bounds (WRONG_PAYLOAD_TYPE). Prepend BDC.
- WLC_E_LINK signalled link-up via the reason field, but the driver
checks ev->flags & 1. encodeEventFrame now takes a flags arg; LINK uses
flags=1.
- Join needs WIFI_JOIN_STATE_KEYED, which only a WLC_E_PSK_SUP(status=6)
event sets (connect(ssid, "") still configures the WPA supplicant).
Emit it on a successful join.
- Join events were raised synchronously during the SET_SSID ioctl, so the
driver processed them before cyw43_wifi_join set wifi_join_state=ACTIVE,
wiping the bits. Defer events until just after the ioctl reply.
- Event-mask stored 4 bytes misaligned vs queueEvent's read offset.
- SET/GET kind bit is 0x2 (SDPCM_SET), not 0x1.
Remaining for status UP / isconnected: DHCP (needs the packet-transport
bridge or an emulator-side DHCP responder).
Add PioBusSniffer.inDiscardableWriteData(): true while framing a large
non-F2 write (firmware/backplane bulk write the chip discards). The boot
harness drops those data words (keeping ~4 so the PIO raises TXSTALL,
which is all the driver's write path waits for) instead of bit-banging
the full ~224 KB through the PIO. F2/SDPCM IOCTL writes and every
count/command word are retained in full, so the bring-up still completes
the 23-IOCTL wifi_on sequence (F1 framing 3613 -> 97, F2 unchanged).
Also adds IPSR + PC-histogram sampling: confirmed the post-mcast_list
stall is thread-mode (no GPIO IRQ storm) inside MicroPython's host-side
cyw43_cb_tcpip_init (lwIP), above the chip emulation.
Unblocks the full wifi_on IOCTL sequence in the boot harness (clm_load
through the 23-IOCTL bring-up, no crash):
- Drive WL_HOST_WAKE (GPIO24, active-high): the driver gates poll_device
on this pin until its first packet (had_successful_packet), so without
it the first IOCTL response is never read. Emulator now exposes
onHostWake(level) and toggles it with the inbound-frame queue.
- Encode F2/SDPCM frame reads per 32-bit word (encodeFrameWords), same
as register reads: the DMA-in sets channel bswap=true, so an un-encoded
frame landed byte-reversed -> header_length read back as garbage and
the driver dereferenced ioctl_header at an unaligned address (crash).
Guarded to boot mode pass-through (no F2 traffic there; keeps unit tests).
- Fix SET/GET detection: SDPCM_SET is bit 1 (0x2), not 0x1; echo the
kind bit in IOCTL responses.
- Add IOCTL/SDPCM debug counters + sequence log for the harness.
Harness (investigation, CYW43_HARNESS=1 only): non-dropping TX FIFO so
large F2 writes are not truncated, crank PIO steps/tick so the firmware
drains in wall-clock, GPIO24 host-wake wiring, CPU-fault + PC-histogram
+ PIO-state instrumentation.
Remaining: stall after mcast_list (#22) inside cyw43_cb_tcpip_init.
cyw43_spi_transfer calls pio_sm_restart before each transfer's count words, so
hooking restart() to reset the sniffer makes framing deterministic across the
firmware-stream fast-path (no phantom-transfer carryover). Verified: restarts
fire 3625x (once per transfer), F1 phantom count drops, and the CLM IOCTL write
now frames correctly (cmd decodes to F2, 'clmload' payload). Wired into
RP2040Simulator + the harness.
Remaining (next session): the CLM/IOCTL write doesn't complete its payload and
wifi_on still fails (active()=False) — bus_init stalls at/around clm_load with
only 2 STATUS reads and goes idle. Next: trace the CLM write's DMA/PIO drain and
the SDPCM IOCTL response path. See findings.md F-13.
debugInboundCount + STATUS-read tracking show initInbound=1, statusReads=2,
statusReadsWithPkt=2, finalInbound=1: the credit frame IS visible at both STATUS
reads (not a credit tight-loop). The driver reaches clm_load's F2-ready check
(passes) but the F2 IOCTL write never appears on the bus and bus_init returns.
Next: instrument the F2-write path. See findings.md F-13.
Pins the connect blocker: zero F2 transfers (F0=11 F1=97 F2=0), so the host
never sends an IOCTL — it stalls on SDPCM bus credits in clm_load (STATUS shows
no F2_PACKET_AVAILABLE) and times out, so wifi_on fails and active() stays
False. Next: make the credit-granting frame visible in SPI_STATUS during the
stall. See project/picow-wifi-emulation/findings.md F-13.
Brings the Pico W CYW43439 gSPI emulation from "fails at the first register
read" to "the chip boots fully and MicroPython's network.WLAN().active(True)
returns" — validated end-to-end against the real RPI_PICO_W firmware via a
headless boot harness.
What now works (Phases 1-2):
- PioBusSniffer rewritten to the real cyw43_bus_pio_spi framing
[out_bits][in_bits][cmd][write_data], skipping the two PIO loop-counter
words. Self-healing: validates count1 (= tx_length*8-1, 4-aligned, <=2052)
and skips non-conforming words — re-syncs after the extra word rp2040js
pushes on large writes AND fast-paths the ~224 KB firmware stream.
- Dual word-order regime: boot 16-bit-LE (swap16x2 / swap16) flips to 32-bit
big-endian (bswap32) at the SPI_BUS_CONTROL write. Calibrated empirically
against the firmware. Sniffer reads the mode via setModeProvider().
- Cyw43Emulator: encodeReadWord (per-regime), readBytes-sized backplane reads
with the value in the last word (response-delay pad), ALP+HT clocks and F2
always ready, AI core registers (IOCTRL/RESETCTRL), interrupt register
reports no errors, f1Mem echo store, SDPCM bus-credit granting + initial
frame.
- RP2040Simulator: serves chip responses on rxFIFO.pull (on-demand) instead of
racing the async DMA/PIO; passes readBytes through.
Not done yet (Phase 3+): connect() runs but stalls in the power-management /
save-restore phase before any F2/IOCTL traffic; packet transport (Tier 2) and
firmware-clocking perf are open. See project/picow-wifi-emulation/ for the full
research, phases, and findings.
The boot harness (picow-cyw43-boot-harness.investigate.test.ts) is gated behind
CYW43_HARNESS=1 so it stays out of the normal test run.
Follow-up audit after the ESP32 fix: classifyPin() was run for every board
against the protocol pin labels its element actually exposes. One real gap
remained -- Arduino Mega. Its dedicated SDA/SCL pins are only labelled (not
numbered), so I2C links drawn on them came back 'digital' and never bridged.
Map every Mega function label (TX/RX, TX0-3/RX0-3, SDA/SCL) to its pin number.
Audit result for the rest (added as board-protocols-audit.test.ts):
- Arduino Uno/Nano, Pico/Pico-W, STM32 Blue Pill: already OK.
- ESP32 / ESP32-C3: fixed earlier (esp32-uart-pin-classify).
- Raspberry Pi 3/4/5: OK -- the element labels pins by physical number (1..40)
which normalize to BCM, so no function-label gap exists there.
Wiring two ESP32s TX2->RX2 (Serial2) or TX->RX for board-to-board serial
produced no data on the receiver: classifyPin() returned 'digital' for the
UART pins, so the Interconnect never installed the byte-level UART bridge.
Two causes in boardProtocols.ts normalizePinName:
- TX/RX aliases only matched boardKind === 'esp32' exactly, missing every
variant (esp32-devkit-c-v4, esp32-cam, esp32-s3), and TX2/RX2 were not
handled at all. Resolve them via startsWith('esp32') (esp32-c3 kept
separate) and map TX2/RX2 -> GPIO17/16.
- 'GPIO17'-style labels fell into the 'GP' (RP2040) branch first, where
parseInt('IO17') = NaN swallowed them to null. Exclude 'GPIO' from the
'GP' branch so the ESP32 GPIO-prefix handling runs.
Adds esp32-uart-classify.test.ts (6 cases, green).
Revert the earlier approach of widening the existing PWM-callback assertions to
accept the new timeMs arg — that masked a contract change rather than fixing it.
Instead, updatePwm now hands the optional timeMs only to listeners that declare
a 3rd parameter (cb.length >= 3) — i.e. the buzzer, which needs the precise
onset time. Plain (pin, dutyCycle) listeners, and the existing
toHaveBeenCalledWith(pin, dutyCycle) tests, see an unchanged 2-arg call, so the
original PwmCallback contract is preserved.
Add a PinManager test locking the dispatch: a 2-param listener stays 2-arg; a
3-param listener receives timeMs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The sample-accurate scheduling (06526c7) added an optional 3rd `timeMs`
argument to PwmCallback / updatePwm, which broke 9 existing strict
toHaveBeenCalledWith(pin, duty) assertions (PinManager, AVRSimulator,
mega-emulation, attiny85). Match the real signature: PinManager drives
updatePwm directly with no timeMs (assert `undefined`); the AVR OCR-poll path
computes timeMs = cpu.cycles / 16000 (assert `expect.anything()`).
Leaves one pre-existing red — component-to-spice "custom-chip missing fixture"
— which fails on master too and is unrelated to this PR.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A melody / continuous tone (consecutive tone() with no noTone() between) is
back-to-back nonzero-OCR PWM writes with no note-off, so startTone() overwrote
activeOsc without stopping the previous node — oscillators stacked and were
never stopped (reported: created 6, started 6, never stopped 6).
Add a monophonic guard at the top of startTone(): release the live note
(gain ramp + stop) before starting the new one, so a pitch change REPLACES
rather than STACKS. Extract a shared releaseActive(off) helper (also used by
stopTone). Add two melody tests: one asserts starts === stops (no orphans),
monotonic onsets and per-note pitch; one asserts a melody ending without a
trailing noTone() leaves only the final note ringing (stops === starts - 1).
The metronome path is unaffected (each click is an onset→note-off pair, so the
guard never fires there); the three existing metronome tests stay green.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The `custom-chip` SPICE mapper emits its sources from getChipDrivenPins()
(the chip's live driven output pins), so a static pin/property fixture can
never exercise it -- it always returns null. The "every mapped metadataId
has a test fixture" check flagged it as missing a fixture, failing the
suite. Exclude it via a RUNTIME_STATE_MAPPERS set; custom-chip SPICE
behaviour is covered by the chip-bus integration tests.
Pre-existing since 4cb5748 (custom-chip first-class circuit nodes).
Add a working microSD card part backed by a FAT16 image, following the
Wokwi storage model: the project's own workspace files are auto-copied
onto the card (free), and an optional "SD Card" panel uploads extra
files (gated as a paid feature by the velxio.dev overlay; OSS default
allows it).
Frontend (in-browser AVR / RP2040):
- ProtocolParts.ts: rewrite the microsd-card part from a handshake stub
into a real SD-over-SPI device (reply-first Ncr timing, SDSC byte
addressing, single/multi-block read+write, CSD/CID, full CMD set).
- utils/fatImage.ts: dependency-free FAT16 super-floppy builder (8.3 + LFN).
- utils/sdCardFiles.ts: assemble the card image from workspace files plus
uploaded files; base64 helpers.
- components/simulator/SdCardPanel.tsx + ComponentPropertyDialog: upload UI.
- DynamicComponent + useSimulatorStore: build and inject the image on run.
- lib/proSdCardGate.ts: overlay-installable gate for the upload action.
- data/examples-storage-microsd.ts: Arduino Uno + ESP32 gallery examples.
Backend (ESP32 via QEMU):
- services/esp32_sd_slave.py: synchronous SD-over-SPI slave (Python port of
the browser part) with a sparse backing store, idle-state R1 tracking and
real CRC16 on data blocks when the host enables CRC (CMD59) -- both
required by ESP-IDF's sdspi driver.
- esp32_worker.py: route SPI bytes to the slave (returns MISO synchronously)
and feed write-only bulk transfers.
- esp32_lib_manager.py + routes/simulation.py: forward the FAT image
(sd_card.image_b64) from the start config into the worker.
Tested:
- frontend: protocol-parts, fat-image, sd-card-gate and microsd-real-firmware
(real Arduino SD.h on avr8js) -- 86 passing.
- backend: test_esp32_sd_slave (10) covering the ESP-IDF init sequence and
CRC16; validated end to end by running a real SD.h sketch in libqemu-xtensa
(mount, directory listing, read and write-readback).
The RP2040 core (125 MHz Cortex-M0) is ~8x heavier to emulate than the
AVR. The run loop used a FIXED per-frame cycle budget, and arduino-pico
delay() busy-waits the timer (no WFI), so a host that cannot sustain
125M instr/s rendered a 1s blink every 4-5s (sim ran in slow motion).
- Derive the frame budget from the MEASURED wall-clock delta (mirrors
AVRSimulator) instead of assuming a perfect 60fps.
- Add IdleSpinDetector: recognise a side-effect-free busy-wait spin and
advance the clock over it (capped at the next timer alarm / scheduled
pin change) instead of executing every idle cycle - the same idea the
WFI fast-path already uses for sleep(). Conservative: a bit-bang loop,
an input-poll that just saw its pin move, or a loop that calls out are
never elided; a false positive only ever advances time up to the
wall-clock budget, never past the next event.
- Bound WFI sleeps to the wall-clock budget so they advance in real
time across frames rather than leaping ahead.
Cuts emulation work for a delay-bound sketch ~1900x (125M -> ~65k
instructions per simulated second) so it tracks wall-time even on hosts
that cannot emulate 125 MHz in real time. Public API unchanged;
step()/stepCycles() untouched.
Adds rp2040-realtime.test.ts: IdleSpinDetector unit tests plus
end-to-end scheduler tests driving a real rp2040js core through a
hand-assembled busy-wait loop (no firmware fixture needed).
Builds on the previous commit; reworks the buzzer audio for glitch-free,
cross-browser playback and adds a metronome quality suite.
- Per-note oscillators with short attack/release ramps, instead of one
long-lived oscillator gated by gain: a fresh fixed frequency per note and no
gain/frequency automation on a persistent node — Firefox in particular clicks
and glitches the pitch otherwise.
- Schedule onsets by their SIMULATED inter-onset spacing (exact, even) with a
light latency hold, instead of a wall-clock average. Turning a control (BPM,
K…) re-locks immediately and the rhythm stays even — no bursts, no overlaps,
no audio drifting away from the display.
- Place each note-off relative to its own onset, preserving the exact click
length from the simulation (the onset scheduler now tracks onsets only).
- Poll PWM every 256 cycles (was 64): finer than any audible pulse, lighter on
the frame loop.
- New src/__tests__/buzzer-metronome.test.ts: drives the buzzer as a metronome
against a controllable audio clock and asserts even spacing, one oscillator
per click with no overlap, correct pitch per metric level, burst absorption,
and a clean re-lock on tempo change.
All simulation-parts + metronome tests pass (57).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A PWM-driven buzzer (analogWrite / Timer tones) was chaotic and unusable as a
metronome. Causes, all on the PWM path:
1. PWM was polled once per animation frame AFTER the cycle loop, so short clicks
that started and ended within one frame were merged or lost, and onsets were
quantised to the frame.
2. The buzzer started the oscillator with `oscillator.start()` (no scheduled
time) — frame-delivery jitter and per-onset oscillator churn.
3. The digital HIGH/LOW path also fired on the ~490Hz PWM carrier edges,
injecting spurious onsets (OCR read as 0 → 20kHz squeaks).
Fix:
- AVRSimulator: poll PWM sub-frame (every 256 cycles) so no pulse is merged or
lost; pass the precise simulated time through updatePwm.
- PinManager: PwmCallback / updatePwm carry an optional timeMs (backward compat).
- Buzzer: one continuous oscillator gated by the gain node, each on/off scheduled
on the AudioContext clock. The schedule predicts the next onset at a smoothed
interval (de-jittering the simulator's bursty per-frame delivery) and holds a
small bounded latency so the click stays aligned with the on-screen playhead
(driven from the same clock) instead of drifting behind it. A `pwmActive` flag
mutes the digital path once hardware PWM drives the pin.
Result: onset jitter for a firmware metronome drops from chaotic (σ ≈ 250ms,
dropped/extra beats, unbounded audio latency) to σ ≈ 15ms at ~30ms latency —
steady and aligned with the display. All 54 simulation-parts tests pass.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A board example proving digital and analog coexist in ONE circuit: the Arduino
drives two logic levels, a physical AND gate combines them, and the AND output
switches an NPN 2N2222 transistor that drives the "motor" LED. Verified live: it
compiles, the MCU drives the AND gate (5 V), the transistor conducts and the LED
lights — MCU -> logic gate -> transistor -> load works across the digital and
ngspice motors together.
Known limitation (sim-mixedmode step 2, pending): the ngspice side does not
re-solve on every MCU pin edge, so a fast (1 Hz) blink does not track in real
time — the analog output changes on a slower cadence. User-driven / slow changes
track fine. Snapshot updated for the new example.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The AND Gate Alarm needed BOTH inputs HIGH at once, but it used momentary
pushbuttons buffered through an Arduino — with one mouse you can only hold one
button at a time, so the AND never fired and the alarm could never be
demonstrated.
Rebuilt it as a board-less digital circuit: two SLIDE switches (they latch) feed
a real AND gate that drives the alarm LED. Slide both switches ON and they stay,
so the alarm arms. No MCU / compilation — it runs on the digital gate engine.
Verified live: the LED lights only on 11 (00/01/10 -> off, 11 -> on).
Snapshot updated: the new board-less and-gate-alarm netlist, plus the digital
bucket count label (38 -> 39) from the earlier ripple-counter example.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds the first board-less SEQUENTIAL gallery example (digital-ripple-counter-4bit):
four T flip-flops chained into a ripple counter, LEDs showing the binary count,
clocked by a slide switch. Impossible on the SPICE engine (no edge detection at
DC) - it runs on the digital gate engine.
Controller fix (found by testing the counter live): the controller rebuilt the
network on every change, which reset flip-flop state so a counter never counted.
Now the network is built once and KEPT ALIVE; a switch toggle applies
incrementally via setSwitch (preserving sequential state), and a rebuild happens
only on a structural change (components/wires). Correct for combinational AND
sequential circuits.
examples-digital.test.ts: flip-flop examples are digital-engine-only, so they are
exempt from the SPICE-mapping / has-a-gate / netlist checks (the "logic" check
now accepts a gate OR a flip-flop). digitalgate-engine-examples: a correctness
test clocks the real counter example and asserts it counts 1..15,0 in binary.
Verified live (?digitalgates default ON): the counter counts 0..6 on the canvas;
and the complex examples all work - comparator-4bit (A=B correct), decoder-3to8
(perfect one-hot x8), alu-slice-1bit (32 combos deterministic), multiplier-2x2
(3*3=9, 7 distinct products), adder-subtractor-4bit (5+3=8).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Flip-flops are edge-triggered and hold state, which the combinational settle
kernel cannot model alone. buildDigitalNetwork now gives each flip-flop explicit
state + rising-CLK-edge detection (reusing the LogicGateParts sample semantics):
sample the data nets on the edge, drive Q + Qbar. Because a flip-flop only
updates on the clock edge, a Q->D / Q->CLK feedback (counter / shift register)
does not oscillate the settle loop. isAllDigital now accepts a gate OR a
flip-flop, so pure sequential circuits qualify.
Test digitalgate-sequential (4): D (capture + hold), T (toggle), JK
(hold/set/reset/toggle), and a 2-bit ripple counter (FF0.Qbar clocks FF1)
counting 1,2,3,0,1 - impossible on the SPICE path (no edge detection at DC, no
SPICE mapper). The controller already routes all-digital circuits through
buildDigitalNetwork, so a board-less counter/shift-register example would run
live; authoring those gallery examples is the only follow-up. Full digitalgate
+ examples-digital + circuit-simulation-service suites green (127 tests).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
buildMixedNetwork evaluates the gate (digital) side of a MIXED circuit on the
settle kernel and exposes the boundary with the analog (ngspice) domain. Unlike
buildDigitalNetwork it does not bail on non-primitive components - those are the
analog side; their pins mark the nets they touch as boundary. Exposes
boundaryNets, readBoundary(net) (digital->analog: the gate-driven level to seed
an ngspice voltage source) and setBoundaryInput(net, level) (analog->digital:
ngspice's solved+thresholded level, which re-evaluates downstream gates).
Test digitalgate-mixed-boundary (4): the boundary nets are exactly the
digital/analog bridges; both directions track; a digital->analog->digital
coupler loop converges. No ngspice needed - the analog side is supplied by the
test. Wiring the handoff to the live ngspice netlist (0/Vcc sources + threshold
+ settle<->solve iteration) is the remaining step; it needs the running solver
(the node loader is broken by a pre-existing path bug) and a mixed example.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Phase 4 (brought forward before the mixed-mode boundary). digitalgate-sweep
proves the engine handles 38/38 gallery digital examples: every one builds,
resolves every LED, and never oscillates. Tightened isAllDigital to also require
at least one logic gate, so a degenerate analog {source, resistor, LED} circuit
stays on ngspice rather than being claimed by the digital path. Flipped
digitalGatesEnabled() default to ON (override with ?digitalgates=off).
Full frontend suite 2120 pass / 5 fail — the 5 are the same pre-existing
unrelated failures (ngspice node-path, attiny85 arduino-cli, component-to-spice
catalog); the default flip adds no new breakage and examples-digital +
circuit-simulation-service stay green.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Board-less digital circuits (logic gates + switches + LEDs) run today as ngspice
analog B-sources, which is fragile for deep logic: a 4-bit ripple adder re-solves
but never lights its result LEDs live. This adds an event-driven digital motor
that reuses the multichip-bus settle kernel, so the same engine that boots a Z80
over a chip bus evaluates a gate network exactly and instantly.
Phases 0-2 (project/digital-gate-engine/), all behind ?digitalgates=on (default
OFF — flag off is byte-for-byte the old behaviour):
- digitalGateEngine.ts: buildDigitalNetwork(components, wires) does union-find
over the wires (merging pass-through resistors), identifies the rail/gnd from
the signal-generator, registers drivers (rail STRONG-1, gnd 0, pull resistors
PULL, slide-switch as a pass-gate) and event-driven gates (reusing the
LogicGateParts boolean semantics), settles on busKernel, and exposes
setSwitch / readLed / netOf. Tolerant of both the raw example `type` and the
store `metadataId`. Returns {ok:false} for any non-primitive, so mixed/analog
circuits stay entirely on ngspice.
- digitalGateController.ts + a SimulatorCanvas useEffect: when the flag is on and
the circuit is all-digital, rebuild from the store on switch-toggle / load
(rAF-coalesced) and paint the wokwi-led DOM. CircuitSimulationService.tick()
skips the SPICE solve for all-digital circuits when the flag is on, so the two
motors never fight over the LEDs.
Tests: digitalgate-kernel (22 — single gates -> half/full adder -> 4-bit
adder/subtractor -> exhaustive ADD 256 -> mux/decoder/comparator/parity/
multiplier) and digitalgate-engine-examples (6 — the real gallery data for
and/or/xor/not + the full adder/subtractor). Verified live: ?digitalgates=on
lights the adder's result LEDs that the SPICE path leaves dark. Full suite
2117 pass / 5 pre-existing unrelated fails.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The gallery example loaded but the Z80 never visibly ran: the screen stayed
frozen on garbage. Two multi-chip async-load races, neither caught by the
existing headless tests (which drive RESET manually and attach the display
before boot):
1. RESET edge-vs-level race. The Z80 only left reset on the RISING edge of
RESET (a pin watch). In the browser the 7 chips instantiate asynchronously,
so the small power-on-reset chip releases RESET before the larger Z80 has
registered its watch -> the edge is lost and the CPU stays in reset forever.
Fix: on_clock samples the RESET level (hardware-accurate; RESET is
level-sensitive) so a missed edge self-corrects. An undriven RESET reads low,
so the CPU safely stays in reset until something drives it high.
Repro/guard: chipbus-galaksija-reset-race (race ordering must still boot).
2. Display-snoop load-order race. galaksija-display was a passive write-snoop;
the ROM paints the screen ONCE at boot then idles, so a display that comes up
late misses every write and shows stale content forever. A snoop cannot
recover writes it never saw. Fix: fold the screen into the RAM chip
(galaksija-ram-display) and render from the ACTUAL video RAM (0x2800-0x2BFF,
internal 0x0800 with A0-A12 wiring) on a ~30 fps timer - correct regardless
of load order, exactly how the real machine scans video RAM.
Repro/guard: chipbus-galaksija-display-snoop-race (late snoop shows nothing)
+ chipbus-galaksija-ram-display (renders even when first paint is post-boot).
The example now has 6 chips (RAM+display merged, gdisp dropped), 76 wires.
Verified live in the browser: boots to "@'READY", shows the ">" prompt, and
pressing A echoes ">A_" through keyboard -> Z80 -> video RAM -> display. The
full chipbus suite is 45/45.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Adds a memory-mapped keyboard so you can type into the Galaksija. Based on
the libretro Galaksija core's scheme (not guessed): reading 0x2000+offset
returns 0xFE when the key at that matrix offset is held, 0xFF otherwise;
the keyMap gives the offset per key ('A'=1 ... Enter=48, Space=31, etc.).
- galaksija-keyboard.c: drives reads of 0x2000-0x203F from a keys[] table and
exports set_key(offset, down) for the host to push key events. Never drives
outside the keyboard range.
- galaksija-ram.c: ram-64k variant that yields reads of 0x2000-0x203F to the
keyboard (writes still go to RAM), so the two never fight for the bus.
- ChipRuntime: ChipInstance.hasKeyboard + setKey() expose the chip's set_key.
- CustomChipPart: bridges browser keydown/keyup (by KeyboardEvent.code, via
GALAKSIJA_KEY_OFFSET) into the chip, ignoring keystrokes while the code
editor or an input is focused so typing code is never hijacked.
- The gallery example gains the keyboard chip (now 7 chips, 99 wires) and uses
galaksija-ram.
Test chipbus-galaksija-keyboard: pressing 'A' (offset 1) makes the BASIC
monitor echo "A" after its ">" prompt and advances the cursor. 41 chipbus
tests pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Ships the full Galaksija (1983 Z80 home computer) as a runnable Retro
gallery example, plus the pieces needed to run a multi-chip bus live in the
browser.
Gallery example (examples-retro-intel.ts, id 'galaksija-z80-computer'):
Z80 + galaksija-rom (public-domain ROM A+B) + ram-64k + inverter (A13
decode) + galaksija-display + a power-on reset chip, wired chip-to-chip
over the bus (76 wires), no board. Click Resume and it boots the real ROM
to the "READY" prompt on the green display. Chip wasm is embedded
(wasmBase64) so it runs without a backend compile.
- ChipRuntime.tickTimers gains a wall-clock budget (CustomChipPart passes
6 ms): a faithful-but-slow event-driven bus can't run a real-time CPU in
one animation frame, so without a cap a Z80 fetching over the settle
kernel froze the tab. With the budget the sim advances slower than real
time (boots over a few seconds) and the UI stays responsive; fast
single-chip examples finish under budget and are unaffected.
- galaksija-display: blits its framebuffer on a ~30 fps timer instead of on
every character write, so a clear-screen burst doesn't flood the canvas.
- reset-gen: power-on reset (pulses RESET high, ties WAIT/BUSREQ/INT/NMI
high) so the machine boots on Resume without a manual reset.
- chipbus flag now defaults ON (override with ?chipbus=off): chip-to-chip
buses are a core capability; single-chip and board nets never take this
path, so the only thing enabled is multi-chip buses, previously broken.
Verified live in the browser: the example boots and renders "@'READY" with
the ">_" prompt, responsive. Full suite 2084 pass (5 pre-existing,
unrelated env failures).
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Galaksija stores ASCII codes in its 0x2800 video RAM (verified by snooping
the boot: it writes "@'READY" + ">_" prompt). The original CHRGEN ROM uses
a hardware-specific addressing that does not map char-code*8 to a glyph, so
rendering through it produced garbled output. Render the ASCII codes with
the public-domain IBM/VGA 8x8 font (font8x8 by Daniel Hepper / Marcel
Sondaar) instead -- legible green-on-black phosphor text. The boot screen
now reads "@'READY" with the ">_" input prompt, exactly like a real
Galaksija. Tests updated to check the bright-green channel.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
galaksija-display.c: a 32x16 text video chip that renders the Galaksija
video RAM. It is a passive bus snoop -- watches WR + address + data, and on
a write into the 0x2800 video region stores the character and renders that
cell into a 256x128 framebuffer using the public-domain CHRGEN font (code*8,
bit 0 = lit). It never drives the bus. The host blits the framebuffer to the
chip canvas (vx_framebuffer_init / vx_buffer_write).
Two tests:
- chipbus-galaksija-display: snoop+render smoke test (a write of 'R' to
0x2802 lights its cell; unwritten cells stay blank).
- chipbus-galaksija-computer: the COMPLETE machine over the chip-to-chip bus
(Z80 + galaksija-rom + ram-64k + inverter decode + galaksija-display) boots
the public-domain ROM and renders the monitor's "READY" prompt on screen.
40 chipbus tests across 10 files pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The public-domain Galaksija ROM (Voja Antonic; ROM A monitor + integer
BASIC, ROM B float BASIC, 8 KB) runs on a standalone Z80 + external ROM +
RAM + an inverter for address decode, all chip-to-chip over the shared bus,
no board:
ROM 0x0000-0x1FFF rom.CE = A13
RAM 0x2000-0x3FFF ram.CE = NOT A13 (the inverter chip)
RD -> both OE ; WR -> RAM WE
Pin-level boot proof (mirrors test_intel/test_z80/galaksija.test.js): watch
M1, read the address bus on each opcode fetch, and confirm the Z80 leaves
the reset vector (DI; SUB A; JP 0x03DA), reaches the init routine at 0x03DA,
and runs 1000+ fetches across 50+ distinct ROM addresses -- the real
firmware executing end-to-end through the settle-kernel bus. The on-screen
"READY" prompt is the next milestone (needs the video display chip
rendering the 0x2800 video RAM).
galaksija-rom.c embeds the public-domain ROM A+B image. 38 chipbus tests
across 8 files pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The architectural heart of the retro computer, proven on real chips. A Z80,
a 32K ROM, a 64K RAM and an inverter (address-decode glue) are wired
chip-to-chip over a shared address + data bus, no board:
ROM at 0x0000-0x7FFF rom.CE = A15
RAM at 0x8000-0xFFFF ram.CE = NOT A15 (the inverter chip)
RD -> both OE ; WR -> RAM WE
The ROM program writes 0x5A to RAM at 0x8000, clears A, reads it back, and
HALTs only if the byte survived. HALT going low proves the full core works:
the Z80 runs from ROM, the inverter decodes A15 to select RAM (the settle
kernel drives the combinational glue across hops), and the RAM latches a
write and returns it on a read over the shared tri-state bus, all within
synchronous bus cycles. Adds z80-ram-rom.c (boot image) + ram-64k/inverter
fixtures. 37 chipbus tests across 7 files pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
End-to-end validation of Phases 0-2 on an actual CPU. The real Z80
(examples/intel/z80.c) and a 32K EPROM (z80-boot-rom.c, a rom-32k variant
holding JP 0x0006 / HALT) are wired chip-to-chip over a shared address +
data bus with no board. RD drives the ROM's OE; CE is left enabled.
Booting exercises all three phases at once: the Z80 drives the address ->
the ROM reacts on the shared net key (Phase 0); asserts RD -> the ROM
tri-state-drives the data bus while the Z80 released it (Phase 1); and reads
the data bus in the SAME tickTimers step, getting the settled byte
(Phase 2 settle-before-read). The Z80 fetches C3,06,00, jumps to 0x0006,
fetches 76, and HALTs -> drives HALT low, which the test observes.
z80.wasm is compiled from the committed examples/intel/z80.c; the boot ROM
source + chip.json live in test_custom_chips/sdk/examples. All 36 chipbus
tests pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Fixes root cause B: a CPU bus cycle drives address+strobe then reads the
data bus in the same tickTimers call, so the memory chip must react before
the read. Phase 0/1 applied each net change by firing PinManager listeners
immediately, which recurses one JS frame per hop - deep glue chains are
deep recursion and a combinational loop overflows the stack.
- busKernel.ts: a delta-cycle settle loop. A net change is recorded in a
pending set, not applied recursively; settle() drains it in batches
(deltas), applying each and letting the driven chips re-dirty the next,
until a fixed point or DELTA_CAP trips (oscillation -> warn, not hang).
Two-phase: a drive lands in pending and is applied on the next delta, so
a chip evaluating mid-settle reads last-stable nets. The first drive of a
cycle settles synchronously before returning to the chip's C code, so the
in-cycle vx_pin_read sees settled data.
- busNets: publishes resolved levels through the kernel instead of calling
triggerPinChange directly.
Tests (chipbus-buskernel): multi-hop chain settles; settle-before-read; a
5000-hop chain settles without stack overflow; a ring oscillator trips the
cap and warns instead of hanging. The two-real-chip integration still
exchanges 0xA5 through the kernel. Full suite 2079 pass flag-off.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
A chip-to-chip net is now resolved by (value, strength), not last-writer-
wins, so a real multi-driver bus works: many chips on one data line, only
the enabled one drives, the rest release to Hi-Z.
- busLogic.ts: 4-valued (0/1/Z/X) + drive-strength resolution. Strongest
driver wins; equal strength + opposite = X (contention); no driver = Z;
pull resistor = pull strength. modeToDrive maps VX_OUTPUT -> strong,
VX_INPUT -> Hi-Z (the rom/ram/8255 "release by input" idiom becomes real
tri-state), VX_INPUT_PULLUP/DOWN -> pull.
- busNets.ts: per-net driver registry; resolves and pushes the resolved
level into PinManager; warns once on contention.
- syntheticPins.ts: isSyntheticNetPin distinguishes bus net keys.
- ChipRuntime.ts: pin register/write/set_mode route bus-net pins through
busNets (gated by chipBusEnabled + isSyntheticNetPin); non-bus pins keep
the legacy path; dispose releases the chip's bus drivers. SPICE source
emission is skipped for bus pins (digital fast path beside SPICE).
Tests: busLogic (14), busNets (6, incl. tri-state hand-off + contention),
and the two-real-chip integration now exchanges 0xA5 through the registry.
Full suite 2074 pass with the flag off.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
End-to-end proof of the chip-to-chip net-key fix through the real
ChipRuntime + PinManager (not a unit stub). Two chips compiled from C
with wasi-sdk:
- bus-driver.c: drives 0xA5 onto D0..D7 at setup.
- bus-reader.c: polls D0..D7 on a 1ms timer, mirrors onto OUT0..OUT7.
Wired chip-to-chip with no board; with the chipbus flag both chips' Dn
pins resolve to one shared net key, so the reader reproduces 0xA5.
- sdk/examples/bus-{driver,reader}.{c,chip.json}: the proof chips.
- __tests__/fixtures/chipbus/*.wasm: committed fixtures (regenerate with
the test_intel/scripts/compile-chip.sh flags).
- __tests__/chipbus-twochip-integration.test.ts: loads the fixtures via a
relative path; skipIf they are absent.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Fixes root cause A of the multi-chip digital bus track
(project/multichip-bus/): chip-to-chip nets were keyed per-endpoint by
syntheticChipPin(chipId, pinName), so two chips on one wire resolved to
two different PinManager keys and never shared a net.
- chipNets.ts: union-find over the wire graph mints one canonical
syntheticNetPin per net; resolveChipNetKey returns it only for pure
chip-to-chip nets (>=2 chip endpoints, no board pin). Reuses the
existing spice/unionFind.ts.
- syntheticPins.ts: add syntheticNetPin(netId), same allocator/space.
- DynamicComponent.tsx: traceDetailed consults resolveChipNetKey at
depth 0 before the chipNeighbour fallback. Board priority (rule 1) and
chip-to-component (rules 2/3) are unchanged.
- Gated behind ?chipbus=on / localStorage.velxio.chipbus (off by default).
Proof (D-008 go/no-go): __tests__/chipbus-netkey.test.ts - a byte written
on one chip's keys is visible synchronously to another via PinManager.
9 new tests; 85 resolver/PinManager/parts regression tests green flag-off.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
ePaper panels rendered rotated/misaligned on AVR and RP2040 (e.g. the 2.13"
Pico clock came out sideways and clipped). The ESP32 worker decoder was just
taught to compose in the controller's native RAM geometry and rotate to the
display orientation, but the browser-side SSD168xDecoder (used by AVR/RP2040)
still composed at display dims with no rotation, so the two diverged.
- SSD168xDecoder.ts: port the worker's native-window compose + rotation.
* Size RAM to the longer side both ways so a rotated native layout
(128x296 behind a 296x128 panel) isn't truncated.
* Compose in the active RAM window, then rotate via the inverse of
Adafruit_GFX setRotation(1). Detect orientation by BYTE width so a
non-multiple-of-8 native width (the 2.13" panel is 122 px) is handled.
* Track the UNION of windows per frame: paged drivers (GxEPD2 page height
< panel) set one partial window per page, so compose must use the full
native area, not just the last page's strip. Fixes the all-white render
on paged panels (1.54" Uno, 4.2" Pico, 7.5" ESP32).
* Add an isBwr option: B/W panels treat 0x26 as a 2nd mono plane (white
only if both planes white), tri-colour panels keep red-wins.
* Default the active window to display geometry; the firmware overrides it.
- EPaperPart.ts: pass isBwr = cfg.palette === 'bwr' to the decoder.
- esp32_spi_slaves.py / esp32_worker.py: mirror the byte-aware rotation +
window-union in the worker, and derive is_bwr from panel_kind on the
runtime sensor_attach path too (fixes the tri-colour ESP32 alert badge).
- test_epaper/ssd168x_decoder.py: re-port the golden reference to match
(keeps the 3-way TS/Python/worker identity invariant). Tests updated to
construct tri-colour cases with is_bwr/palette='bwr'.
- examples-displays-epaper.ts: the Pico VCC wire referenced '3V3(OUT)',
which the velxio-pi-pico-w element doesn't expose (it has '3V3'), so the
wire snapped to the board corner. Use '3V3'.
Phase 1 of the run-system/UX work.
Stop bug: a programmable chip kept running after Stop when a board was present.
The chip rAF tick gated only on board presence (!boardless), so with a board it
ticked forever. Now it gates on the actual run state: board-less -> electrical
paused flag; with board(s) -> board.running. handleStop also clears every chip's
output drives (clearAllChipDrives) and re-solves so chip-driven LEDs go dark on
Stop instead of freezing at their last frame.
Examples to board-less (regulated power supply, no Arduino — the Arduino only
ever supplied 5V):
- z80-larson-scanner -> 'Z80 Comet Scanner': board-less, a faster TWO-LED comet
(scanner.s) so it's visually distinct from z80-larson-no-board's single-bit
walk; green/blue LEDs.
- i8080-killbits -> board-less (psu + resistors), keeps killbits.s as the chip's
editable program; buttons re-powered from the supply.
- i8080-button-counter -> board-less (psu + resistors); behaviour chip, program
baked in, so it shows a note (no editable file) and runs standalone.
banner-streamer stays Arduino-based (its TX/RX go through the AVR USART bridge).
- CustomChipPart: run-state-aware tick gate.
- EditorToolbar: clearAllChipDrives() helper + handleStop clears chip drives.
- examples-retro-intel: 3 conversions; drop now-unused sketch consts; add the
larsonScannerAsm comet program.
- Tests: board+chip routing now uses an inline synthetic example (gallery chip
examples are all board-less).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two fixes from live testing feedback:
1. Adding a programmable chip (Z80/8080) from the gallery created NO program
group — only the chip(s) from the example had one. Root cause: 'programmable'
was detected by a non-empty programFile, but a fresh chip's programFile is
empty until the user writes one. Now detection uses the canonical signal —
chip.json's programTargets — via isProgrammableChip(). When such a chip
lands with no program yet, the file explorer seeds an editable program.c
(DEFAULT_CHIP_PROGRAM_C, a working walking-LED skeleton) into its own group
and stamps programFile/programTarget onto the component so Compile/Run can
build it. Behaviour/driver and predefined chips (no programTargets) still
get no group — edited in the chip designer.
2. z80-led-chaser-c now runs board-less on a regulated power supply (no Arduino,
mirroring z80-larson-no-board) — the Arduino only ever supplied 5V and added
confusion. chaser.c stays the chip's editable program in its own section.
- romCompileService: isProgrammableChip(), DEFAULT_CHIP_PROGRAM_FILE/_C.
- FileExplorer: detect by programTargets; auto-seed program.c + persist
programFile/programTarget for fresh chips.
- examples-retro-intel: chaser-c -> board-less (psu + 8 resistors + 8 LEDs),
drop the now-unused Arduino sketch const; fix a stale sdcc --code-loc comment.
- Tests: board+chip case moved to z80-larson-scanner (still board-based);
isProgrammableChip unit tests.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A programmable custom-chip (a CPU emulator that runs a ROM/program, e.g. the
Z80 or 8080) now keeps its program (larson.s, chaser.c, ...) in a dedicated
editor file group — group-chip-<chipId> — rendered as its own collapsible
section in the file explorer, exactly like each board owns its sketch group.
Behaviour/driver chips and predefined chips carry no programFile and get no
group; they stay editable only in the chip designer.
Fixes two reported issues on the Z80 examples:
- /example/z80-larson-no-board: the board-less chip example now opens its
program (larson.s) as the active group, editable on the left — previously
the editor showed but no file appeared.
- /example/z80-led-chaser-c: the chip program (chaser.c) no longer shows as
a sibling tab inside the Arduino sketch group; it sits in its own chip
section instead. The board group shows only sketch.ino.
Details:
- useEditorStore: chipFileGroupId()/CHIP_GROUP_PREFIX helpers.
- loadExample: seedChipProgramGroups() routes each chip's programFile into its
own group (seeded from the example files), sweeps stale chip groups, keeps
the program OUT of the board group, and for a board-less chip example makes
the chip group active so the program is the editable file shown.
- EditorToolbar.prepareCustomChips: resolves the program from the chip's own
group (falls back to board files for older projects) before assembling ROM.
- FileExplorer: renders one collapsible section per programmable chip with an
IC icon; clicking switches the editor to the chip group. Lazy-creates a
group for chips dropped on the canvas.
- projectPayload + vlxFile: serialise chip groups alongside board groups and
include them in the dirty-check hash, so chip-program edits persist on
save / autosave / .vlx export and round-trip via replaceFileGroups on load.
- Regression tests for board-less + board+chip routing and stale-group sweep.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Six gpiozero (Python) examples to exercise the Pi 3/4/5 QEMU Linux boards
with different sensors/actuators. All strictly digital — the Pi has no ADC
and PWM is not simulated, so this covers the GPIO in/out paths that work:
- [Pi 3] Blink an LED
- [Pi 3] Running Lights (5 LEDs)
- [Pi 4] Button Toggles LED
- [Pi 4] RGB LED Color Cycle (digital, 7 colors, pwm=False)
- [Pi 5] PIR Motion Alarm
- [Pi 5] Traffic Light
Structure mirrors the existing Pi example (boards[] + vfsFiles['script.py'],
run via 'python3 /home/pi/script.py'); LEDs wired directly like
nano-button-led. gpiozero is used because it works across Pi 3/4/5 (RPi.GPIO
doesn't on Pi 5). Adds a smoke test loading all six (board kind, components,
wiring consistency, gpiozero script present in the VFS).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Cleaner follow-up to the multi-board residue fix. Instead of removing the
extra boards and retyping the surviving one (which left a stale id such as
"stm32-bluepill" on what was now an Arduino Uno), the single-board path now
tears every board down and adds exactly one fresh board of the target kind.
This mirrors the multi-board and board-less paths and guarantees the
surviving board's id matches its kind.
Drops the now-unused setBoardType/activeBoardId destructures and tightens
the boardFilter cast off `any`. Strengthens the regression test to assert
the surviving board's id and kind.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three reported circuit bugs:
- Deleting the active/running board left the global `running` flag stale
at true. That flag mirrors the active board, but removeBoard reassigned
activeBoardId without re-deriving running, so the circuit looked
"running" (toolbar stuck on Stop, canvas locked) and SimulatorCanvas's
master-switch effect auto-started sibling remote boards. New Project
hits the same path (it removes every board in a loop). removeBoard now
re-derives running from the new active board (false if none remain).
- loadExample's single-board path called setBoardType when boards already
existed but never dropped the extra boards a previous multi-board
example had added, so they lingered as residue. It now removes every
board past the first before retyping, matching the multi-board and
board-less paths.
Adds board-removal-running-reconcile.test.ts (6 regression tests; full
suite 1917 passing).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The boards added in 6813891 (F103CB / F401 pill variants, F4 Discovery,
Olimex H405, Netduino 2/+2) run on the libqemu-arm backend with no
in-browser canvas example, like the existing Blue/Black Pill. Add them to
ACCEPTED_UNCOVERED so the coverage matrix passes.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
stm32-bluepill and stm32-blackpill are Pro features emulated on the backend
via the licensed libqemu-arm QEMU lib (no in-browser canvas engine, same as
the Raspberry Pi boards), and their gallery examples are intentionally not
shipped to the free tier. Add them to ACCEPTED_UNCOVERED so the board-kind
coverage matrix passes — this was missed when the boards were introduced.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Same root cause as the previous test fix in 3e38397 — upstream commit
d64eebc (fix(stop): reset CPU to PC=0) added a hardResetPinStates() call
to useSimulatorStore.stopBoard. The vi.mock factories in these 6 ESP32-
adjacent test files only exposed updatePort/onPinChange/getListenersCount,
so any test path that hits stopBoard crashed with "is not a function"
once the real prod code called the new method.
Each gets a single-line addition: this.hardResetPinStates = vi.fn();
Verified with full vitest run: 127 files pass, 2,005 tests pass, 0 failures.
🤖 Generated with Claude Code
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
David Montero
ciegovolador