A ProBoardDef can declare builtInSdCsPin, and the store already built a FAT
card from the project files for it - but there was no way to put YOUR files
on that card: the upload panel only existed for the microsd-card component
and for parts with metadata.sdSlot, and boards have no properties bag.
Boards now carry sdFiles (same shape the SD panel persists everywhere else):
- BoardInstance.sdFiles, consumed by the store's Run path (card component
still wins when one is on the canvas);
- the board inspector shows the SD Card panel whenever the board kind
declares builtInSdCsPin, and routes the panel's onChange to updateBoard;
- .vlx round-trips it (serialisableBoard + payload type), and gallery
examples can pre-load the slot via ExampleBoard.sdFiles, applied by
loadExample the way the panel would.
First user: the XIAO ESP32S3 Sense (CS=GPIO21), whose board def and example
land in the pro overlay.
- Rotate/Delete (and the board actions) moved OUT of the left column into a
bar across the bottom of the dialog, so they are in the same place on both
tabs. Buy joins them, right-aligned: it used to be the last thing in the
datasheet body, which meant scrolling that pane to the end to reach it, and
it did not exist at all on the Properties tab.
- The datasheet scrolled sideways because the doc tables have a nowrap first
column (the pin name) and wide pinouts pushed past the pane. The dialog is
wider (720px, still clamped to the viewport so it cannot run off the right
edge) and the doc now wraps: fixed table layout, wrapping first column,
pre-wrap on code blocks, overflow-x hidden.
Switching Properties <-> Datasheet resized the whole dialog: each tab sized
to its own content, so a short property list shrank it and a long datasheet
grew it. The tab pane is now a fixed 360px (capped at 46vh) and each tab
scrolls inside it, so the dialog holds still. The mobile full-sheet keeps
flowing as one column.
Rotate and Delete were outline buttons; the brand kit says interactive
surfaces are solid accent blue (--blue-600 #0071e3, hover --blue-500) and
destructive ones solid danger red (--red-500 #ff453a), both with white text.
They use the app's own tokens rather than hardcoded hex.
The preview effect still depended on componentMetadata BY IDENTITY. For
components that is stable (the registry hands back the same object), but for
BOARDS the canvas builds the metadata inline per render, so every parent
re-render - which a pointer moving over the canvas causes - tore the preview
element down and rebuilt it. The dialog visibly resized and snapped back.
It now keys on a digest of the metadata (id, tagName, defaults) and reads the
object through a ref, joining propsKey and pinsKey which were fixed the same
way earlier. Nothing rebuilds unless something real changed.
91 of the 156 catalogue parts have neither an authored doc nor a metadata
description, so the Datasheet tab rendered nothing but tag chips and read as
broken. It now states plainly that no datasheet is written yet, and points at
the pin map, which IS the useful content for those parts. The picker hover
card gets the same line, since both render one body.
The Arduino Uno came out wrong: 18 pins on the top header, 13 on the bottom,
and SIX x values shared between the two. The column detector accepted any two
pads sharing an x, so those pairs were read as columns and most of the board
was thrown into the side gutters with leader lines fanning across the art.
A column now needs three pads AND small gaps between them (no more than 40%
of the body), which is what a real header looks like; rows get the same guard
on x. The Uno lands as two headers, top and bottom, with no side gutters at
all - covered by a test using its real 31-pin table.
Three things from using it:
- The pin map is why the dialog gets opened, so hiding it behind a checkbox
meant every visit started with a click. Pins are always drawn now and the
toggle is gone (with its translation key).
- The dialog sat at z-index 1300 and the pro agent chat panel docks over the
canvas at 8000, so on a wide layout the dialog opened UNDERNEATH the chat -
invisible, on the very area the chat covers. It now sits at 8500: above the
chat, still below the component picker.
- On a 32-pin board a name in the gutter could not be matched to a pad by
eye. Hovering (or focusing) either the label or the dot now lights the
whole run - label, leader line and pad together.
Right-clicking a board opened a small bespoke menu (Board Options... / Flash
to real board / Remove board) with its styling inline, while components got
the inspector. Boards now open the SAME dialog: the live board art with every
pin labelled at its real position, and an actions column that carries Board
Options and Flash instead of Rotate (boards do not rotate), with the delete
button reading "Remove board" and the wire count moved into the confirmation.
The dialog grew four optional props to make that possible without a second
implementation: extraActions, deleteLabel/deleteHint, and
previewTagName/previewAttributes - boards select their art through a
board-kind ATTRIBUTE rather than a property, so the preview needs to set it.
Also adds the boardOptions and flashToBoard strings to the nine locales: the
old menu hardcoded them in English, so those two items never translated.
205 lines of inline-styled menu are gone.
The ReSpeaker's left side carries 13 labels: at the minimum spacing that is
208px against a 190px body, so the column ran past both ends and the first
and last labels were cut off by the preview's clip. The gutters now grow to
whatever the labels actually occupy - the box follows the content.
Three things the dialog got wrong in use:
1. Missing pins. Classification was nearest-edge with an "interior" bucket,
and interior pins printed no label - only a dot with a tooltip. The
ReSpeaker Lite showed it: its XIAO socket is two INSET columns (x=50.5 and
126.5 on a 178-wide body) plus two breakout columns, so most of its pins
were called interior and the part looked like it was missing them. The
classifier now finds the LINES first - pins sharing an x are a column,
pins sharing a y a row - assigns each line to the side of the body it sits
on however far inset it is, and joins label to dot with a leader. Only a
lone pad falls back to nearest-edge. Every pin gets a printed label; that
is now the contract, covered by a ReSpeaker test with its real table.
2. The panel was cut off on the Datasheet tab until some unrelated event
re-rendered it. The datasheet loads asynchronously, so the one-shot
measure placed the dialog while it was still short and it then grew off
screen. A ResizeObserver repositions on any size change, and the tab body
caps its own height so long markdown scrolls inside the tab.
3. Flicker when the pointer left and re-entered. The preview effect depended
on componentProperties and pinInfo by identity - both are rebuilt on every
parent render (pinInfo is a getter) - so the element was torn down and
remounted constantly. It now depends on stable digests of them.
An SSD1306 has 8 pins along a 240px header. Horizontal labels need ~36px
each = 288px, so they overflowed the art box and rendered outside the dialog,
over the header and the canvas. Top/bottom labels are now vertical text - what
printed pinout diagrams do - which needs only the side spacing, and the gutter
grows to fit. The preview also clips, so nothing can escape again.
The right-click dialog was a 250px column: every pin as a text row (an ESP32
means 30 rows of scrolling), a few editors, Rotate/Delete. The picker's info
card (datasheet, brand, Buy) was a separate surface you could only reach by
hovering the catalogue. One dialog now serves both:
- ~560px, two panes: live preview + actions on the left, Properties/Datasheet
tabs on the right. The Datasheet tab IS the picker card's body -
ComponentInfoPanel was split into an embeddable ComponentInfoBody (+
useComponentDoc, and its .cip-* styles moved to their own stylesheet) so
both surfaces render one implementation.
- "Show pins" (off by default): the preview is the REAL web component,
mounted and scaled, with pin markers at their true pinInfo positions and
labels flanking the side each pin lives on. pinInspectorLayout is pure
geometry - nearest-edge classification, per-side label stacking with a
minimum spacing and leader lines when nudged, interior pins as
dot+tooltip - driven only by pinInfo plus the measured element size, so
every part and board, present or future, works with no per-part data.
Dots are tinted by the pin's declared signal (i2c/spi/power/...).
- Clicking a pin keeps the old contract (onPinSelect -> handlePinClick), so
wires start with the same undo, colors and running-state gating.
- The two open gestures finally agree on coordinates: right-click always
passed viewport coords while touch passed canvas-local ones; the dialog is
now portaled to body in viewport space and the touch site converts.
- Keybind capture, the SD Card panel, the two-step delete, Escape and
click-outside all migrate unchanged. Mobile keeps the full-sheet layout.
Geometry covered by pin-inspector-layout.test.ts with coordinate tables
copied verbatim from the shipped parts (ESP32 two-column board, LED, an
interior-pin case).
The "SD Card" upload panel in the property dialog was keyed to one component
id, microsd-card, so a part that CARRIES a slot of its own (the Seeed Round
Display shield) had a working card electrically but no way to put files on
it - the user saw the slot mount and could never feed it.
New metadata flag sdSlot: the dialog shows the same panel for any part that
declares it, persisting uploads as properties.sdFiles exactly like the
standalone card. The part's simulation is responsible for reading them when
it builds its card image.
Two independent defects, both visible as "the NTC reports the wrong
temperature" (issue #233).
1. The part built its divider against a hard-coded 5 V rail, while the SPICE
path used the board's real rail. They only agreed on AVR. On a 3.3 V board
the injected node sat above the ADC's full scale: the slider at 25 C read
~1.4 C, and every slider value below ~11 C saturated to the same number, so
-40, 0 and 10 C were indistinguishable. The rail now comes from the board
(analogRailVolts), matching setAdcVoltage's own AVR/RP2040/ESP32 split.
2. The divider convention was corrected in 608c2538 (VCC -> R_pull -> OUT ->
R_NTC -> GND) but data/examples.ts was not updated with it, so three of the
four bundled NTC sketches still decoded the OTHER topology. Their readings
came out mirrored about 25 C: the uno-ntc example printed -3.42 C with the
slider at 60 C - the exact symptom dd22bcfe had recorded as the bug. Fixed
in uno-ntc, pico-ntc and attiny85-ntc-sensor; examples-circuits.ts was
already right.
The sibling analog sensors (gas, flame, heart-beat, sound) map their sliders
0..1023 onto the same hard-coded 5 V and will saturate the same way on 3.3 V
boards. Left alone here: that is not what #233 reports, and each one needs its
examples re-checked before changing.
Stage 1 arms a \r at banner+800ms to flush QEMU's held ">>> " prompt, and
stage 2 arms Ctrl-A at prompt+200ms. Nothing kept the first from firing
after the second: if the prompt ever arrives on its own within 600ms, the
\r lands inside the pasted source, and MicroPython reads a lone \r as a
newline - it cuts a source line in half with no diagnostic of its own.
Here that is still latent; the in-browser JS engines, which deliver serial
per byte, hit it on every single run.
Three generic seams, none naming any board:
The pin tracer gains a socket hop: a component that declares boardSocket
with a board actually seated on it resolves a pad to the SAME-NAMED pin
of that board — seating IS the connection, like a XIAO pushed into a
shield header or a HAT on the 40-pin. Until now a seated shield's
buttons and LEDs were dead unless the user drew wires the real stack
does not have. Wires keep working exactly as before for every other
host (Uno, Mega, Pi, STM32, ...).
setMicrophoneSource now RETURNS whether a bridge actually took the
source, so a part can state that this host has no I2S instead of
pretending to stream into a void — capability reported, never invented.
createNeopixelDecoder is exported: boards are not the only things
carrying an addressable LED, and a part with one on board needs the
same decode rather than a drifting copy.
Deterministic repro (emulation-gaps F4): after pinMode(2, INPUT_PULLUP)
with a correctly-wired button-to-GND, all 8 setup()-time digitalReads
and the first two loop() passes returned 0 — the input register only
got its level from the first SPICE solve (~400 ms). That window is what
fired phantom emergency-stop latches and auto-started state machines in
audited sessions (and an unwired INPUT_PULLUP pin on the qemu bridges
never got driven at all: no net in pinNetMap, connector skips it, guest
read 0 forever).
Fix: PinManager.onPullChange fires on pull transitions; AVRSimulator
seeds its port input to the resting level instantly (real silicon does
this in ns), and makePinPullHandler does the same for the qemu-bridge
boards via the shim's setPinState. Sourced nets are still overridden by
the very next solve, so the 'mis-wired button still works' regression
guarded by the June work cannot return.
Audited circuits (2026-07) passed pre-flight with zero findings while being
electrically dead or mis-supplied: a battery with one pole wired, a MOSFET
switching a rail nothing powers, a 12V-coil relay fed from 5V, and VCC pins
tied together with no source. Three new graph-based rules (no solve needed,
so they fire even when ngspice cannot converge; all non-blocking warnings):
- unpowered-net: power-input pins (VCC/VIN/V+/COIL+/rated supply pins) and
whole conduction regions that no battery, power supply, or board pin
reaches. Ground and source-negative nets do not bridge power; MOSFET/BJT
conduct only through their channel; a relay coil is isolated from its
contacts; custom chips and boards are self-powered.
- no-return-path: a source with a single pole wired, or whose + side never
reconnects to its - side (return analysis joins all pins, so voltage-driven
gates/bases are not false positives).
- voltage-mismatch: relay coil_voltage vs the nominal supply on the coil
nets (region fallback for coils fed through a switch/transistor): below
the 60% pull-in threshold it never actuates, above 1.5x it burns out.
verifyFromStore now also verifies circuits whose only source is a
power-supply component. Gallery sweep extended to fail on the new codes:
zero findings across all 228 wired examples.
DS3231 (I2C 0x68):
- New velxio-ds3231 Web Component (4-pin module: GND/VCC/SDA/SCL) with
pinInfo per CLAUDE.md 6a; registered in elements-register + main.tsx.
- Catalog entry in scripts/component-overrides.json (_customComponents)
mirrored into components-metadata.json exactly as the generator emits it
(verified by cloning wokwi-elements and running generate:metadata: zero drift).
- The existing VirtualDS3231 device sim (DS1307-compatible time regs
0x00-0x06 + control 0x0E / status 0x0F / temperature 0x11-0x12 at 0.25 C
steps) is now user-reachable from the picker; the AVR/RP2040 attach path
gains live temperature updates via the SensorControlPanel (new ds3231
slider in sensorControlConfig).
GPS NEO-6M (UART talker, 9600 baud):
- New velxio-gps-neo6m Web Component (VCC/RX/TX/GND, pulsing PPS LED).
- New part sim GpsParts.ts: emits a valid GPGGA+GPRMC cycle per second
(correct XOR checksums, ddmm.mmmmm coords, UTC clock advancing 1 s/cycle)
with lat/lng/altitude/speed configurable via property dialog and live
via a new SensorControlPanel entry. Defaults: Madrid 40.4168 N 3.7038 W.
- Injection routes, chosen by classifying the wired board pin:
1) hardware UART RX -> new uniform sim.feedUart(uart, data) seam
(AVR USART0, RP2040 uart0/1 via rp2040js feedByte, ESP32 uart0/2 and
STM32 USART1/2 via their bridge shims); byte feed is paced in 8-byte
wall-clock chunks so 32-byte RX FIFOs never overflow;
2) any other digital pin on a cycle-accurate sim -> real 8N1 bit-banged
waveform via schedulePinChange, so SoftwareSerial decodes it;
3) feedUart rejection (e.g. Mega USART1-3, not modelled by avr8js)
degrades permanently to the bit-banged path.
- Interconnect already probed sim.feedUart; implementing it also upgrades
cross-board UART byte shortcuts for RP2040 uart1.
Tests: new gps-neo6m.test.ts (16 tests: NMEA builders, byte injection on
Uno RX0 / ESP32 RX2, Mega RX1 fallback, waveform decode back to $GPGGA,
live position updates, PPS pulse) + 3 new ds3231 AVR-path tests in
protocol-parts.test.ts. Full frontend suite: 2294 passed, 2 pre-existing
Galaksija Z80 timeouts that pass in isolation. npx tsc --noEmit clean.
Lets metrics overlays distinguish agent-triggered compiles from manual
ones (the AI assistant's compiles were previously invisible in project
counters). Loose optional field — omitted means manual.
The STM32 branch of collectPinStates deliberately skipped outputs from
the netlist — a workaround from when pinNameToArduinoPin couldn't map
'PC13' at all. With the mapping unified, emit digital outputs like every
other board so wired LEDs light from the solve (emulation-gaps F3).
Adds the missing BOARD_PIN_GROUPS entries for the STM32 family (3.3V
logic, suffixed GND/3V3 silks) so sources stamp at the right voltage.
Three parallel half-implementations of the pin-name mapping each broke a
different board family (2026-07 emulation-gaps audit):
- collectPinStates.pinNameToArduinoPin returned -1 for STM32 'PC13' (no
V source stamped: LED dark with correct firmware) and for nano-esp32
'D2'/'A0' (no pull resistor stamped for INPUT_PULLUP buttons).
- connectDigitalInputsToMcu.gpioFromPinName only knew digits/GPIO/GP, so
labeled pins were never driven from the solve (buttons stuck LOW).
- connectAnalogInputsToMcu's ADC_PIN_MAP used 'GPIO32'-style lookup keys
that never matched the real bare-number wire pin names, so the
SPICE->ADC path skipped every esp32-family pin; its per-kind GPIO
converters also mapped nano-esp32 A-pins with the AVR convention.
All three now delegate to utils/boardPinMapping.boardPinToNumber (with
the previous behavior as fallback for unknown names). Also adds the
ESP32-C3 branch to the store's adcChannelForPin (GPIO0-5 -> CH0-5,
verified against the qemu SARADC channel layout).
The GPIO->channel map only covered the classic ESP32 (GPIO 36-39/32-35),
so on esp32-s3 / xiao-esp32-s3 / arduino-nano-esp32 every SPICE-driven
analog value was dropped and analogRead saw 0 (when it didn't hang —
fixed machine-side in libqemu 1.2.5's SENS stub). S3 family: ADC1 =
GPIO 1-10 -> CH0-9, ADC2 = GPIO 11-20 -> channel index 10-19, matching
the machine's channel layout.
setSpeakerMonitor mirrors setMicrophoneSource: a part that models a
board with an on-board speaker/jack (reSpeaker Lite) gets the peak of
each block the guest played, so it can light a meter, while the audio
itself goes to the host's sound card via the engine bridge. Nothing is
wired for it on the canvas — that is the point: a real board plugged
into your speakers has no wire to draw. No-op on bridges without an
audio path, which reads as a silent speaker.
Drag-to-front lifted boards but never parts: a component's z lives
inside .component-interactive-group, which is itself a stacking
context, so the 10+rank set on the inner wrapper was clamped to the
group's own level (1/2) while boards compete one level up as direct
children of .canvas-world. Once any board had been dragged it sat at
10+rank and no component could ever climb back over it — drag an LED
onto the Arduino and the board swallowed it, exactly as reported.
The rank now lands on the group itself (both branches: instruments and
ordinary parts), so parts and boards share ONE rank space and the last
thing dragged really is the thing on top. The inner wrapper keeps its
local 1/5 for selection order within the group.
An unseated board dropped over a component was painted underneath it
(boards z 0, components z 1) and became impossible to grab back; the
earlier blanket z bump for boards broke the opposite case, hiding LEDs
and transistors behind every board. Neither static order can win both.
The rule is now the user's own gesture: the FIRST movement of a drag
raises that item (board or part, symmetrically) to the top of a
monotonic dragged-stack, so a board dropped over an LED sits visibly on
top — and dragging the LED afterwards wins the stack right back.
Click-select alone never raises: selection must not reshuffle a scene
you arranged. Untouched items keep the static layering (components
above unseated boards, seated boards above their socket), and the rank
map is ephemeral — never saved with the project.
The overlay's auto-save implementation arrives via a dynamic import that
races the first React commit. A hook whose mount effect ran before the
overlay chunk evaluated saw installedImpl === null and stayed idle for
the whole life of the tab: no debounced saves, no beforeunload flush,
with no visible symptom. Any tab that hard-loaded straight into the
editor and never remounted it silently lost every edit made after the
project was bound.
installAutoSaveImpl now wakes hooks that mounted before it ran, so the
implementation starts as soon as it exists. Swapping a live impl at
runtime remains unsupported.
The load effect listed the overlay's `settled` flag as a dependency. On
a direct /example/<pro-id> URL the load can begin the moment the
overlay registers the example — one microtask before the overlay's
import promise settles. The flip then re-fired the effect mid-load: the
cleanup cancelled it (setReady skipped), the re-run hit the loadedIdRef
guard and returned, and the page hung on "Loading example…" forever.
The effect now depends only on the example itself; the 404-vs-still-
loading decision moved into the render, where reading `settled` cancels
nothing. A load cancelled mid-flight also resets the loadedIdRef guard
so a genuine re-run reloads instead of early-returning.
setMicrophoneSource on the simulator shim mirrors addI2CDevice: a part
that produces audio hands one 16-bit sample per call to whatever bridge
implements the method (the in-browser JS-engine bridges); everywhere
else the optional chain makes it a silent mic. No board-kind checks in
components. Plus the flat reSpeaker Lite glyph for gallery cards.
Every control in the unified strip is now 28px tall: tb-btn (was 30),
Libraries (was 26), the C++/MicroPython select (was ~22), the board
selector, Serial/Scope, canvas icon buttons, zoom and Add (all were 32).
The explorer toggle moves inside the Code/Both/Circuit segmented group
as its first segment, and every active-segment blue is the Libraries
blue (var(--color-action-primary)) instead of the hardcoded #0e639c.
The editor zone's overlap floor becomes min-width: max-content — the
hardcoded 280px sat below the real content width, letting the console
button paint over the board selector when the docked chat narrowed the
bar. Now the zone can never shrink under its buttons; flex-wrap moves
the canvas controls to a second line instead. Also closes the gap
between the logo and the File menu (header gap 16->6, menubar
margin-left 14->2).
The common namespace was assembled with a shallow spread, so any
top-level section present in two locale files had the later file clobber
the earlier one WHOLESALE. Two live casualties:
- header: adding header.shareProject to common2 (yesterday's raw-string
cleanup) erased common.json's whole header — header.auth.* and
header.nav.* — so the account menu rendered "header.auth.signOut" as
its label. My regression, caught verifying the account-menu fixes.
- editor.share.*: common2's editor section has been clobbering
common.json's since forever — the Share modal's seven visibility
labels were silently lost in every locale. Pre-existing.
Locale files merge by key now (deepMerge, both the synchronous en init
and the dynamic per-locale loader), which ends the failure class instead
of the instance; shareProject also moves to common.json's header where
it belonged. Verified: all header.auth/nav and editor.share leaves
resolve again in all nine locales.
The bottom-left block read wrong: a globe crowding the account button for
no gain — language already lives in the menubar's Language menu for
everyone, and (for signed-in users) inside the account menu. The footer
now holds only the account button.
Width-aware, as requested: when the explorer is dragged narrow (footer
under 150px, via container query) the username hides and the avatar
alone identifies the account; with the explorer collapsed, the floating
fallback box shows just the circle.
Adds the OSS half of the crash fix: LocaleSync listens for
'velxio-locale-switch' window events and performs the locale change as a
normal SPA navigation. The pro account menu is injected into its own
React root OUTSIDE the Router, so it cannot navigate itself — its
language rows dispatch this event instead.
The explorer toggle tooltips (Hide/Show file explorer) and the header's
Share-project title were raw English — now keyed and translated in all
nine locales, same common2.json home as the menubar strings.
Every menu we added lived on t() English fallbacks — the keys did not
exist in ANY locale file, so a Spanish or Chinese user got an English
menubar. 29 keys (editor.menu.* + the toolbar labels the File menu
reuses) now exist in en/es/pt-br/it/fr/zh-cn/de/ja/ru.
Two entries needed their own leaf keys: editor.toolbar.compile and .run
are nested OBJECTS (title/options/... sub-keys), so t() on them cannot
resolve to a string — the menu now uses editor.menu.compile / .run,
which also avoids double shortcuts ("Compile (Ctrl+B)" plus the menu's
own Ctrl+B column).
Verified mechanically: all 38 keys the menubar references resolve to
strings in all nine locales.
The menubar now matches the desktop app's native menu set: File, Edit,
View, Language, Help.
View collects what the user asked to reach from a menu: Compile (Ctrl+B),
Run, Stop, Reset up top; the panel toggles — File Explorer, Output
Console, Serial Monitor, Oscilloscope/Logic Analyzer — in the middle
(store-backed ones render a live check, like a real desktop menu); and
the canvas view actions (center, zoom) move here from Edit, which goes
back to being undo/redo only, as menus have always worked.
Language lists the nine locales with the current one checked, switching
through the same switchLocale path the header globe uses — so language is
reachable from the menubar regardless of the account state, on top of
living in the signed-in account menu.
Run/Stop/Compile/Reset and the console toggle register through the
editorCommands seam from EditorToolbar (their handlers close over its
state); the explorer toggle from EditorPage; serial and scope call their
stores directly, same as undo/redo.
The floating corner box sat ON TOP of the file tree — create enough files
and the last rows scrolled underneath it. The account + language block is
now the explorer panel's footer (VS Code style): the tree scrolls above
it, always. When the explorer is collapsed the block falls back to the
small fixed corner box, so account and language stay reachable.
The standalone language globe becomes a logged-out affordance: once the
pro auth slot renders its signed-in marker (data-auth-user), a :has()
rule hides the globe — signed-in users change language inside the
account menu, where the pro overlay now hosts it.
The language menu and the account menu were written for the top bar and
open downward; from the bottom-left corner box that means straight off
the bottom of the viewport. The language menu flips via a scoped CSS
rule; the account menu (pro) now anchors bottom-up whenever its trigger
sits in the lower half of the screen.
The header's backdrop-filter makes it a containing block for fixed
descendants, so the corner box's bottom:8px resolved against the 45px
header — measured at y=-4, sitting on the logo. Portaled to <body>, where
fixed means the viewport. The auth slot keeps working: pro's injector
finds it by attribute wherever it lives.
IDE-style: a small fixed box in the explorer's quiet bottom corner holds
the language switcher and the account button (pro keeps injecting it into
the same data-velxio-slot, just relocated). The autosave dot rides next
to the menus, and the header's Share button is gone — File > Share/Embed
already covers it.
The point is width: emptying the header's right side gives the toolbar
the last ~150px it needed, so the single-row layout now holds down to
~1400px WITH the chat docked — which is exactly the reported 1440x900
case. Tight-fallback thresholds drop accordingly (1400/1060/1040).
Desktop-editor variant only; marketing pages and mobile keep their
header untouched.
At 1440x900 with the chat docked, the merged header hit an ugly in-between:
the wrapped canvas controls floated as an orphan group inside a tall
transparent header, next to a dead gap before the language/user controls.
Reported by the user as "se ve raro" — wider screens looked fine.
Below the width where one row genuinely fits (thresholds account for the
docked chat's 380px / collapsed 36px reservation), the strip now falls
back to being its own full-width second bar with its old background and
border — the exact familiar pre-merge layout. Wide screens keep the
single 44px row; tight screens get the classic two bars; the broken-
looking limbo between them no longer exists.
The toolbar's overflow button held four leftovers (Share/Embed, Sync to
GitHub, Upload firmware, Record simulation). They move into the File
menu, which is where a session-frequency action belongs, and the strip
loses one more button. The PRO pill travels with them — same style the
overflow used (now .emb-pro) — and the two File items that were always
premium (BOM, schematic image) finally show it too: users should know an
item is premium BEFORE clicking, not via a surprise upgrade prompt.
The pro actions keep firing the same window events the overflow items
fired (share/github-sync/record prompts), so the overlay's listeners are
untouched and OSS builds keep their silent no-op. Dead overflow CSS
removed with the button.
With the marketing nav gone from the editor header, its middle was ~700px
of dead space at 1280 while the toolbar occupied a whole second 38px bar.
The unified toolbar strip now fills that middle through a new AppHeader
editorToolbar slot: one 44px row where there used to be 44+38 — a full
row returned to the code and the canvas.
The strip keeps its own class names, so everything that keyed on them
keeps working untouched: the container queries, the docked-chat
padding-right, and the internal flex-wrap. When it truly cannot fit, the
strip wraps and the header grows (height: auto on the modifier class)
instead of clipping or overlapping; brand and the right-side controls
stay pinned to the first line. Inside the header the strip drops its own
background and border so it reads as one bar, not a box within a bar.
Mobile keeps the previous layout (no strip; the mobile tab bar remains).
The open-source build now ships exactly its product surface: /editor, the
examples gallery (/examples, /examples/:id) and the per-example editor
(/example/:id). Landing, about, pricing, docs, the 14 keyword-targeted
simulator landings and the v2/v2.5/v3 showcases move to the private
overlay, registered through the same registerProRoutes seam that already
carries login/admin/classroom.
Root behaves per build: an overlay that registers an index route claims
'/' (velxio.dev keeps its landing); otherwise '/' redirects to /editor.
The redirect waits for the overlay import to settle — same contract as
markProExamplesSettled — so a velxio.dev visitor is never bounced into
the editor because the landing was 300ms away from registering.
Prerender and sitemap follow the split: entry-server pulls the marketing
page map from '@pro/pages/marketing' behind a VITE_PRO_BUILD-gated dynamic
import (the proven main.tsx pattern, with an OSS stub for tsc), and
generate-sitemap lists only served routes in OSS builds (2 URLs) while
pro builds stay byte-identical — verified against a pre-migration
baseline: sitemap (37 URLs) and prerendered /, /about, /docs,
/arduino-simulator, /esp32-simulator, /v3 all identical modulo hashed
asset names. OSS prerender drops exactly the 32 marketing pages (348→316).
The OSS header slims down to match: Editor, Examples, GitHub, Discord —
the marketing links only render in pro builds, where their routes exist.
The editor Help menu links those pages absolutely (velxio.dev) in OSS,
exactly like the desktop app's Help menu.
Mismo contenido y orden que el Help del menu nativo de escritorio
(pro/desktop menu.rs): Documentation, Examples, Pricing | Velxio Home,
Blog, About Velxio | Discord Community, GitHub Repository. Los enlaces que
el header del editor dejo de mostrar como nav de marketing recuperan aqui
un sitio ordenado, y todo abre en pestana nueva para que el editor (y el
trabajo sin guardar) se quede donde esta — el mismo criterio que la app
nativa, que abre el navegador del sistema.
Reportado en /example/pi5-opencv-vision: al recargar aparecia un instante
el 404 con el header completo (menus incluidos) y despues cargaba el
editor. La carrera: los ejemplos pro se registran cuando aterriza el
import dinamico del overlay, y la pagina resolvia la galeria ANTES,
concluia "no existe", pintaba el 404 y al llegar el registro re-renderizaba
al editor.
"No esta en la galeria" y "no esta TODAVIA" son respuestas distintas, asi
que el registro gana una senal de asentado: main.tsx la activa cuando el
import del overlay resuelve (o falla — finally), e inmediatamente en la
build OSS, donde no viene overlay y un 404 debe ser instantaneo. La pagina
se queda en "Loading example..." hasta que el registro asienta y solo
entonces un id ausente es de verdad un 404.
markProExamplesSettled es idempotente y solo notifica una vez, con test —
el sintoma de romper eso seria una tormenta de re-renders por hot-reload
del overlay.
Con la ventana estrecha y el chat acoplado, a la fila unificada le faltan
~60px y flexbox se los quitaba al toggle Code/Both/Circuit: de 101px a 32,
con dos de sus tres botones recortados a esquirlas inalcanzables bajo el
overflow hidden. Medido en staging a 1024px.
El toggle deja de encogerse (flex-shrink 0) y la fila hace wrap: cuando de
verdad no cabe, los controles del canvas bajan a una segunda linea corta.
Dos filas breves ganan a botones invisibles.
La queja: demasiados botones en una sola fila, y en pantallas pequenas se
solapan — medido, no impresion: a 1024px Code/Both/Circuit pisaban a
Compile/Run/Stop por 9-20px y Add pisaba el chat por 29px, con el idioma y
el usuario cortados fuera del viewport.
Tres piezas:
1. En el editor, el nav de marketing (Home/Docs/Pricing/...) sobra: ya
estas dentro, y cuesta exactamente el ancho que le falta a la toolbar.
AppHeader gana la variante editorMenu — mismo mecanismo que ya usa la
build de escritorio (VITE_DESKTOP) — que oculta el nav y pinta un menu
File/Edit junto al logo. El logo sigue llevando a inicio; idioma,
autoguardado, Share y usuario se quedan.
2. File/Edit al estilo escritorio: lo que se usa cada minuto sigue siendo
boton; lo que se usa unas veces por sesion va al menu. File: nuevo
workspace, nuevo fichero, abrir, guardar, importar, exportar, BOM,
imagen del esquema. Edit: undo/redo (con su estado real del historial),
centrar vista, zoom. Las acciones viven en cierres de cuatro
componentes distintos, asi que hay un registro id->handler
(lib/editorCommands, mismo patron de seam que registerProExamples o
registerBoardBuiltins): cada dueno registra al montar y el menu invoca
por id; un item sin dueno montado se pinta deshabilitado, que ademas es
la verdad. El registro sobrevive al remontaje StrictMode (el cleanup
viejo no borra al sucesor) y tiene test de eso.
3. La toolbar adelgaza: fuera Undo/Redo (Ctrl+Z/Y siguen), fuera los
botones inline de Import/Export y sus gemelos responsivos del More
(~70px recuperados); el More queda solo con los extras pro (firmware,
GitHub, share, grabacion). El CSS responsivo de los botones retirados
se va con ellos.
Suite en verde (2300) y build del overlay verificado desde este arbol.
Tres cambios que van juntos porque atacan la misma queja: "anado un
elemento y a veces ni veo donde se anadio".
1. Donde cae. Ya se anclaba a la esquina visible, pero la cascada que evita
que se apilen iba indexada por components.length: seguia avanzando
aunque movieras o borraras piezas, asi que las caidas se alejaban cada
vez mas de donde estabas mirando. Ahora toma el primer hueco LIBRE desde
la esquina, bajando en diagonal; si apartas la ultima, la siguiente
recupera su sitio. Extraido a utils/dropSlot con 8 tests, incluido el
caso de "la apartaron" y el tope para no salirse de la vista.
2. Que se vea. El recien anadido queda seleccionado, y la seleccion pasa de
un borde discontinuo quieto a un caminito de hormigas. El movimiento es
lo que capta el ojo en un canvas lleno; un borde fijo se pierde. Va en
un pseudo-elemento por fuera del cuerpo, sin robar clicks ni tapar el
dibujo, y se queda quieto si el sistema pide menos animacion.
3. Clicks. El izquierdo SELECCIONA y ya esta; antes abria el panel de
propiedades, o sea que no podias ni senalar una pieza sin comerte un
popup que luego habia que cerrar. Propiedades y pines pasan al click
derecho, que es donde va lo deliberado. En tactil se mantiene tocar ->
panel, que ahi no hay boton derecho.
Velxio es internacional y su galeria estaba mezclada. Tres focos:
- examples-robot-desktop: el codigo que el ejemplo ENTREGA al usuario
llevaba 33 comentarios en castellano ("Tiempo del ultimo movimiento
detectado", "Cola de estados") y 7 cadenas que el sketch imprime por
serie ("INICIO DE LA LECTURA DE SENSORES", "Movimiento DETECTADO").
Traducido todo y reescrito en ASCII, como el resto de la galeria.
- examples.ts: siete comentarios mios en castellano, de cuando anadi las
resistencias en serie a los LEDs. El resto del fichero estaba en ingles;
los deje incoherentes.
Sin cambios de comportamiento: solo texto. Los tests de galeria siguen en
verde (167).
Seam nuevo registerBoardBuiltins/getBoardBuiltins: una placa que el arbol
OSS ya dibuja (la familia Pi) puede recibir perifericos del overlay sin
registrar un ProBoardDef, que es lo que secuestraba el arte de la placa y
dejaba los cables en la esquina. El overlay lo usa para llevar los frames
del guest (cv2.imshow) al panel cableado en el canvas.
Arregla ademas el guard de connect() del bridge: comparaba readyState con
WebSocket.OPEN leido del global, asi que cuando esas constantes no estaban
`undefined === undefined` era cierto con socket a null y connect() volvia
sin abrir nada — el bridge se quedaba muerto. Ahora comprueba que el socket
exista y usa el valor numerico. Recupera los 12 tests de
multi-board-integration que esto habia roto.
El test del UART Pi->Uno pasa a comprobar el contrato vigente: por el cable
va onUartTx (el UART del header), no la consola del guest; y se anade el
caso que fija que la charla de arranque NO se filtra al vecino.
El fan-out del Interconnect envuelve el onSerialData de la INSTANCIA y
la marca con un flag. Compilar, resetear o cambiar de motor crea una
instancia nueva: sin flag y sin envoltorio, asi que la placa dejaba de
oirse por el cable a mitad de sesion. Sintoma real: la Pi en modo Linux
encendia el LED del Arduino (Pi -> Uno), pero la respuesta del Arduino
no volvia nunca (Uno -> Pi), porque el Uno habia recreado su simulador
al compilar despues de que se construyeran las rutas.
Se vuelve a enganchar en cada simulatorMap.set (siete puntos: AVR,
RP2040, RISC-V, ESP32, STM32 y los shims).
Una linea por start con el motor elegido, si estaba fijado y el motivo.
Sin ella, una placa que no arranca NADA (motor equivocado, bridge
ausente) es indistinguible de una que arranco bien: no hay error, no hay
proceso y la barra dice lo mismo. El toolbar ya deja su traza
[handleRun]; esta cubre el camino del boton de modo Linux.
startBoard llamaba `getBoardBridge(id)?.connect()`: si la placa no tenia
bridge, el encadenamiento opcional se lo tragaba y el usuario se quedaba
sin guest, sin error y con la barra mostrando Stop. Ahora avisa por
consola y baja el flag de running, que es lo unico honesto que se puede
hacer ahi.
Test nuevo del camino que usa el boton de modo Linux: fijar el modo,
parar y arrancar tiene que abrir el WebSocket del guest, dejar
engineMode en linux y running en true; y un socket en CLOSING no puede
impedir la reconexion.
connect() se rendia si el socket no estaba CLOSED, y uno en CLOSING pasa
esa prueba: pulsar "Linux terminal" justo despues de una ejecucion
cerraba el socket y el arranque siguiente no hacia nada -- ni guest, ni
error, y la barra seguia mostrando Stop. Ahora solo se rinde con OPEN o
CONNECTING y descarta el que se esta cerrando.
startBoard marca ademas running en la rama Pi: el boton de Linux
reinicia la placa por su cuenta, sin pasar por la barra, asi que el flag
se quedaba con lo que hubiera dejado la ejecucion anterior.
Las rutas serie se construyen al cargar la pagina, pero el bridge de una
placa QEMU-Linux nace al pulsar Run: ensureSerialHook encontraba bridge
nulo, hacia no-op y nadie volvia a intentarlo — los bytes que el guest
transmitia por el header salian del backend (uart_tx) y morian en un
onUartTx sin instalar. reensureSerialHooks(boardId) repite el enganche
(idempotente por el flag) y el store lo llama al crear el bridge.
Auditoria de "la Pi tiene todo lo de la placa real" con cuatro huecos
encontrados y cerrados:
1) GPIO de entrada en modo Linux: GPIO_IN respondia VAL 0 fijo (stub de
la fase 2), asi que GPIO.input() leia 0 eternamente aunque el canvas
empujara el nivel. El backend guarda ahora el ultimo nivel por pin
(set_pin_state lo escribe) y GPIO_IN contesta de ahi. Los flancos
(SET) siguen llegando al guest como antes.
2) UART del header hacia otra placa: el shim del rootfs ya hablaba
`UART <port> TX <hex>` / RX_REQ, pero sin modelo de esclavo el
backend tragaba los bytes. Ahora TX sin esclavo se emite al canvas
(uart_tx) y RX_REQ sin esclavo drena la cola que llena pi_uart_rx —
el mismo protocolo de siempre, sin ops nuevas.
3) El escaner de esclavos I2C/SPI/UART estaba doblemente muerto:
clasificaba por numero fisico de pin ('3','5','19'...) cuando el
elemento expone GPIOxx, y su unico llamador era RaspberryPiWorkspace,
que el terminal unificado reemplazo. Acepta ambos nombres y corre en
onBooted del store.
4) boardPinToNumber solo mapeaba los pines de la 3/4/5; la Zero, 1B+ y
2B (mismo header de 40 pines, mismo elemento) se quedaban sin mapa.
La placa QEMU-Linux tiene DOS flujos serie y hasta ahora el cableado
usaba el equivocado: el enrutado entregaba los bytes del vecino a la
consola (el shell) y sacaba al cable la cháchara del arranque. El
header, que es lo que el usuario cablea, no existia.
Ahora el canal de protocolo lleva dos ops nuevas:
UARTTX <b64> el guest transmitio por el header -> al canvas
UARTRX el guest pregunta que le llego -> UART_RXQ <b64>
El backend guarda una cola por instancia (acotada a 64 KB, que un script
que no lee nunca no la haga crecer) y el websocket acepta `pi_uart_rx`
con los bytes que el vecino manda. En el frontend el bridge gana
onUartTx / sendUartBytes y el Interconnect engancha ESE flujo en vez de
la consola para las placas Pi.
Con esto el mismo script -- import serial, escribir, dormir, leer --
funciona en los dos motores.
El constructor de netlist lee properties.value y cae a 1 kohm si no esta;
once ejemplos declaraban `resistance: '220'`, asi que sus LEDs lucian a
un quinto de lo previsto (brillo 0,16 en vez de 0,72 medido en el
pi-to-arduino-led-control). Se normaliza el nombre de la propiedad.
Dos piezas que faltaban para que pi-to-arduino-led-control fuera algo
mas que un guion imprimiendo lo que "habria enviado".
1) classifyPin no reconocia los pads del header por su nombre. Se llaman
GPIO14 / GPIO15 en el dibujo de la placa y en todos los cables de los
ejemplos, pero solo se aceptaban numeros fisicos: parseInt('GPIO14')
daba NaN, el pin no clasificaba como nada y el Interconnect nunca
construia la ruta. Ahora se acepta el prefijo GPIO/BCM y la numeracion
fisica sigue funcionando.
2) Seam de serie para placas que no tienen ni simulador ni bridge: el
motor de navegador corre el Python de la Pi en la propia pestana.
registerSerialSink(placa, fn) recibe los bytes que le llegan y
feedBoardSerialOut(placa, ch) anuncia los que envia, que es lo que el
enrutado por cables ya sabia repartir.
Dos fallos que salieron probando pi-to-arduino-led-control y
pi5-pir-motion-alarm.
1) BoardOnCanvas mira getProBoard() ANTES del switch OSS para decidir si
dibuja un elemento del overlay. El overlay registraba un def minimo
para las seis Pi solo para llevar una linea de setup del guest, y eso
basto para cambiarles el render: en vez de la ilustracion
Raspberry_Pi_3_illustration.svg salia la caja esquematica, con otras
coordenadas de pines, y los cables quedaban colgando en la esquina.
Ahora hay un registro aparte, registerGuestSetup(kind, linea), que
lleva la cadena y nada mas; getGuestSetup() la resuelve dando
prioridad al def del overlay si existe.
2) Las partes de entrada (PIR, botones, sensores) avisan con
simulator.setPinState(pin, nivel). En una placa QEMU-Linux no hay
simulador de MCU -- el CPU es el guest -- asi que la llamada acababa
en la instancia AVR heredada y se perdia: pulsar el sensor no hacia
nada. traceDetailed devuelve ahora tambien la placa a la que llega el
pin, y si es de la familia Pi la parte recibe un simulador que empuja
el nivel al bridge (gpio_in para el guest, el valor pin<N> que leen
los shims del motor de navegador) y al PinManager de esa placa.
Guarda de regresion para lo que se acaba de arreglar. Recorre el grafo de
cableado (no solo el vecino inmediato del LED, porque la resistencia
protege igual desde el catodo o desde el otro lado de un transistor o un
rele) y falla si algun LED llega a un pin sin limitar la corriente.
Es el peor tipo de ejemplo roto: el sketch imprime "LED ON", el runtime
quema el LED y no aparece ningun error, solo un LED oscuro.
El modelo electrico es honesto: un LED colgado directo de un pin a 3,3 V
o 5 V pide una corriente absurda, el simulador lo quema y se queda
oscuro aunque el sketch imprima "LED ON". Ya se habia arreglado en los
ejemplos de Raspberry Pi con un solo LED, pero quedaban 24 sin proteger
-- sobre todo los de Pico (i2c-scanner, spi-loopback, adc-read,
multi-protocol, serial-echo, eeprom, rtc) y todos los RGB, que necesitan
una resistencia POR CANAL.
Se anaden 36 resistencias de 220 ohm en serie, cada una entre el pin y
el anodo, colocadas al lado de su LED. Los ejemplos que ya llevaban la
resistencia en el catodo se dejan como estan: protege igual.
Con esto la galeria pasa de 24 LEDs que se queman al pulsar Play a 0.
Every Pi example hung its LED straight off a GPIO pin, so the electrical
model solved 2.4e29 A and burnt it out: the script printed LED ON while
the canvas stayed dark. Written before the SPICE engine landed, and
nobody noticed because reaching that point took a 90 s boot. 220R in
series, like the ESP32 examples already do.
Without this we cannot tell whether the in-browser path is actually
displacing guest boots — the whole point of the dual engine is a number
(% of runs that never touched the backend), so the event has to say.
A profile's extra_drive is the same file for everyone; an overlay may
need a disk built for THIS session (what the project declared). New
seam set_pi_extra_drive_resolver(fn) receives the client id, the board
and the start_pi payload and returns raw images, mounted read-only after
the profile's own. The WS route forwards msg_data and the bridge gained
startPayload so a client can declare it. Generic: no package manager,
no OS knowledge in the OSS tree.
Generic seam only — no board, OS or runtime specifics in the OSS tree:
an overlay may register an engine that decides, per board, whether a run
needs the Linux guest or can happen in the browser. The decision is data
(engine + reason + where) so the UI can explain a 90 s boot instead of
just taking it, and BoardInstance carries engineMode / enginePinned so
the user's choice is predictable and the terminal panel knows whether an
interactive shell exists. Nothing registers in OSS: the QEMU path is
untouched.
The netlist collector only understood GPIO<n>/GP<n>/bare digits, so a
wire on a QEMU-Linux board's P24 Gravity pad never got its V-source
stamped and the LED stayed dark while the guest toggled the pin.
Keeping Play enabled while the guest ran broke the convention every
other board follows (owner report). Run now disables as usual; RESET on
a booted guest re-uploads the edited files and re-runs the script
without the ~45 s reboot, matching Reset's restart-the-program meaning.
The generic arm64 image prints another product's banner/motd/login line
during boot, before guestSetup can re-brand the guest. Boards with
quietBoot show a neutral '[Velxio] Booting <label> (Linux guest)...'
progress line (dots every 4 s) while boot detection and the prompt-gated
upload still run underneath; the shell is revealed (already re-branded)
right before the auto-run command, so the user's first visible output is
their own program.
With the bare boardId as client_id, two tabs (or two users) on the same
example shared one QEMU instance: serial output went to whichever socket
connected last, keystrokes interleaved and one tab's stop killed the
other's guest. Suffix the tab session id so each tab gets its own
instance (stopped on its own disconnect, like the ESP32 workers).
QEMU-Linux boards used three competing file surfaces (workspace group
with a meaningless sketch.ino/libraries.json, the VFS panel with its
Upload button, and the Pi workspace's own editor). Now they behave like
every other board:
- the editor file group defaults to script.py for ANY Pi-family kind
(kind-based check via isPiBoardKind, not the old raspberry-pi- string)
- the libraries.json manifest row is hidden for Pi boards
- EditorPage always renders Monaco; the RaspberryPiWorkspace swap is
gone
- the bottom serial panel renders the interactive xterm (PiTerminal,
now seeded with session history) for running Pi boards
- example vfsFiles load into the editor group (single source of truth);
the run path uploads the group into the guest home
- Run on a booted guest re-runs without the 45 s reboot (Ctrl-C +
re-upload + run); starting a Pi board pops the terminal open
- piSyncAndRunScript/piRerunScript exported from the store; auto-run
now applies to the whole family (guestHome/autoRun overridable)
- ProBoardDef.autoRun: after boot (+guestSetup) the VFS uploads itself
and the command runs, so a single Run click boots, uploads and starts
the user's script (same UX as compiled boards)
- ProBoardDef.guestHome: VFS home dir override ('/root' for guests that
log in as root); those boards drop the historic hello.sh sample
- upload sequence extracted to utils/piUpload (shared by the VFS panel
button and autoRun)
- serial monitor strips DEL/C0 control echoes (backspace showed tofu)
El caso ownsPointer retornaba sin stopPropagation y el mousedown llegaba al
fondo del canvas, cuyo convenio arrastre-izquierdo-panea movia el mundo
entero bajo el dedo a mitad de swipe (solo el tap funcionaba). El modelo
tactil escucha POINTER events — stream aparte — asi que cortar el mousedown
(y el touchstart movil) no le quita nada. Los knobs wokwi conservan el
pass-through de siempre.
The boards array is replaced on every serial batch, so the attach effect
detached/re-attached built-in peripherals at up to 60 Hz while output
flowed; events landing inside the 500 ms re-attach window were lost.
One-shot streams (a guest display list) never recover — the repainting
SPI LCD decoders masked this for ESP32 boards.
isBoardSeated lee pinInfo/boardSocket del DOM; en el primer render de un
ejemplo que ABRE con la placa ya posada ni la placa ni el zocalo estan
montados, el memo devolvia 'no posada' y no recalculaba nunca (z=0 pese a
asiento exacto medido). Re-chequeo al siguiente frame y a los 400ms.
La whitelist de tags que poseen el puntero durante la simulacion gana una
salida generica regla-6a: el elemento declara `get ownsPointer() { return
true }` y el wrapper no inicia el drag mientras corre. El cristal del Round
Display pintaba el punto verde Y arrastraba el shield por el canvas a la vez.
El bump global a zIndex 3 (efecto iman del Round Display) puso TODAS las
placas por encima de TODOS los componentes: una resistencia al lado de un
Arduino quedaba oculta tras la placa en cualquier ejemplo normal (se veian
los cables, no el cuerpo). Ahora isBoardSeated (misma matematica del snap,
umbral 0.5px) decide: posada -> z3 encima de su zocalo, como el XIAO fisico
apilado en el shield; libre -> z0 debajo de los componentes, como siempre.
El iman coloca la placa exactamente en el asiento, asi que al capturarla
salta al frente y al arrancarla vuelve abajo.
- profile key extra_drive: optional read-only second virtio-blk so an
overlay can ship guest-side shim libraries (/dev/vdb)
- SENS <name> protocol op: canvas-fed named values (built-in sensors /
buttons) served from PiInstance.sensor_state, pushed by the frontend
via the new pi_sensor_state WS message
- DISP <b64> protocol op: guest display commands forwarded to the
frontend as 'display' events (built-in screens)
- RaspberryPi3Bridge: onDisplay / onGpioPwm callbacks + setSensorState
- SimulatorCanvas hands piFamily boards their Pi bridge in
attachBuiltins (was ESP32-only)
Overlay QEMU-Linux boards are not Raspberry Pis: ProBoardDef.guestSetup
lets a board send one shell line at the boot prompt (hostname/PS1/clear)
to de-brand the generic image, sent before piBooted flips so uploads
cannot interleave; the workspace start button and power-on title carry
the board's own label for non raspberry-pi kinds; the compile console
line uses the board label instead of 'Raspberry Pi 3B'.
The QEMU branch of handleRun required compiledProgram, but Pi-family
boards never have one (handleCompile early-returns 'no compilation
needed' without producing firmware), so the toolbar Run always surfaced
'Compilation produced no firmware' instead of powering the board on.
Start them directly, same as the workspace Start button.
registerPiFamilyKind + ProBoardDef.piFamily route an overlay board through
the existing Raspberry Pi bridge path (WebSocket qemu, VFS panel, boot
terminal); register_pi_board_profile lets the overlay add the matching
PI_CONFIGS entry (cpu/image_set/...) at registration time.
setAdcVoltage/setAdcWaveform solo conocian el mapa del ESP32 clasico
(GPIO32..39): en un S3 devolvian false para TODOS los pines y el part no
podia alimentar el ADC. Ahora el shim consulta bridge.adcChannelForGpio si
existe (los puentes js exponen el mapa de su chip) y cae al mapa clasico
solo si no.
El adaptador SPI del Esp32BridgeShim descartaba el MISO de los parts ('el worker
lo lleva por _spi_response'), cierto solo en la era QEMU: cualquier part SPI que
RESPONDE (una SD contestando CMD0) hablaba con nadie en modo js — medido como
SD.begin()=0 con sd_diskio reintentando CMD0 para siempre en el Round Display.
Ahora reenvia a bridge.setSpiResponse, que todos los puentes tienen: el de QEMU
lo manda al worker, y los motores js fijan el byte que su SpiForwarder devuelve
para ESTA transferencia (toda la cadena onByte corre sincrona dentro del
transfer del motor). El reposo lo restaura el decodificador compartido, que ya
completa cada byte ajeno con 0xff.
El boton conservaba animation:'none' inline fuera del estado requesting, y el
estilo inline gana a la clase: .velxio-ants quedaba con animationName none —
medido con getComputedStyle en staging. Inline solo mientras solicita permiso;
en el resto, undefined para que la clase anime.
El modulo es retrato con la botonera de pines en el borde INFERIOR y el sketch
dibuja en setRotation(1): segun el mapeo MADCTL del propio modelo (writePixel:
el borde superior del contenido rot-1 cae sobre el borde IZQUIERDO del canvas),
verlo derecho exige girar el modulo un cuarto horario — igual que en el banco
fisico. El mismo giro lleva los pines al borde izquierdo, de cara a la placa,
asi que los cables van rectos entre ambos en vez de por encima del cristal.
Cuatro tiras de gradiente repetido, una por borde, deslizando un periodo de
guion por ciclo — fondo y no border porque un borde CSS no puede animar su
dash-offset. currentColor hereda el color de estado (gris en reposo, rojo en
error). Se apaga en streaming/solicitando, y con prefers-reduced-motion.
Ojo del gato encerrado: el estilo inline usaba el shorthand background, que
pisa el background-image de la clase — pasa a backgroundColor.
Un sketch de ESP32-CAM existe para capturar, asi que esperar el click en el
toggle se lee como 'la camara esta rota': el guest arranca, esp_camera_init
completa contra el OV2640 modelado, y cam_hal agota el tiempo eternamente
esperando fotogramas que nadie envia — sin pedir siquiera el permiso.
Ahora la webcam se solicita al iniciar la ejecucion; el prompt del navegador ES
el consentimiento, y el toggle queda como apagador manual. Solo una vez por
ejecucion: parar el stream a mano no lo re-dispara.
Estaban a zIndex 0 con los componentes a 1: cualquier solape las escondia. El
caso que lo decide es el apilado — una XIAO posada en el zocalo del Round
Display debe ser lo que se ve, como la placa recien soltada queda arriba del
monton. Los montajes lado a lado no solapan, asi que nada mas cambia.
Como el iman de la breadboard pero para PLACAS: un componente puede declarar en
su elemento (estilo regla 6a, igual que pinInfo) que lleva un zocalo:
get boardSocket(): { anchorPin, accepts }
y una placa cuyo boardKind case con accepts, arrastrada cerca, se posa de golpe
con su pad anchorPin sobre el homonimo del zocalo. Un solo ancla basta porque
ambas rejillas comparten paso — esa es la gracia de un zocalo. Arrastrarla mas
alla de la tolerancia la suelta, sin estado que recordar.
Enganchado en los dos caminos de arrastre de placas (raton y tactil). El
overlay privado declara el zocalo sin que este repo sepa que existe.
Tres cosas que salieron al tirar del hilo de los pull-ups.
1) ESP32_ADC_PIN_MAP era la tabla del ESP32 CLASICO aplicada a toda la familia, y
fallaba de dos maneras:
- S3: sus pines ADC son GPIO1..20, ninguno esta en esa tabla, asi que la
busqueda devolvia undefined y el listener del potenciometro no llegaba a
engancharse. El mando no hacia nada.
- C3/C6: GPIO0 SI esta en la tabla clasica, como ADC2_CH1 -> canal 9. Pero en
esos chips GPIO0 es ADC1_CH0 y sus motores toman un indice de canal de ADC1
(0..4). El valor se empujaba al canal 9, fuera de rango, descartado en
silencio mientras el firmware leia el 0. Una respuesta equivocada en vez de
ninguna, que es peor.
adcPinMapFor(boardKind) devuelve la tabla del chip.
2) El ejemplo de las gafas OLED en MicroPython declaraba sus botones con Pin.IN a
secas. Van entre 3V3 y el pin, asi que sin pull-down el pin queda FLOTANDO con
el boton abierto. El propio ejemplo ya lo avisaba en un comentario ("Add
Pin.PULL_DOWN if the pin floats") — ahora lo hace. Es un fallo de hardware de
verdad, no un artefacto del emulador.
3) gallery-run-gate.audit.test.ts: EditorToolbar bloquea el Run cuando el
verificador de circuito saca errores, asi que un circuito invalido no es
cosmetico, es la diferencia entre un ejemplo que arranca y uno que parece
muerto. Y esos defectos se esconden hasta que el circuito resuelve DE PUNTA A
PUNTA: c3-button llevaba un LED de 506 mA que nadie veia porque sus cables
apuntaban a pines inexistentes.
El test reproduce la puerta del Run tal cual (mismo snapshot de peor caso,
mismo buildInputFromStore, mismo verifyCircuit, ngspice de verdad) sobre los
227 ejemplos. Encontro tres mas sin resistencia en serie —nano-button-led,
mega-led-chase y mega-serial-control, 17 LEDs en total— y ahora quedan 0.
A partir de aqui, un ejemplo nuevo con un LED colgado del GPIO salta en CI.
Los dos colgaban el LED directo del GPIO. Con los cables del pulsador arreglados
el circuito por fin resuelve entero, y el verificador saca lo que llevaba ahi
desde siempre: 506,9 mA por un LED de 20 mA. Como un error de circuito bloquea la
ejecucion (EditorToolbar checkOrBlock devuelve false y saca el modal de
"ejecutar de todos modos"), el ejemplo se quedaba sin arrancar.
O sea que no era un fallo nuevo, era uno viejo que hasta ahora nadie podia ver
porque el circuito no llegaba a resolverse. 220 ohm en serie, igual que el resto
de ejemplos con LED (esp32-blink-led y esp32-doom ya lo hacian bien).
El canvas reenviaba la pulsacion de un pulsador cableado como
sendPinEvent(gpio, true), o sea "pulsado = ALTO". Para el idiom canonico de
Arduino — pin -> pulsador -> GND con INPUT_PULLUP, activo a nivel BAJO, que usan
13 de los 18 ejemplos con entrada de usuario — eso esta al reves: pulsar conducia
el pin a su nivel de REPOSO y soltarlo al ACTIVO. Ademas escribia directamente en
el latch de entrada del emulador por detras de connectDigitalInputsToMcu,
desincronizando la cache lastLevel de la que ese fichero se declara unico
escritor. La victima visible era esp32-doom: cuatro botones que hacian lo
contrario de lo que pulsabas.
No lo sustituyo por la polaridad opuesta, que seria la misma adivinanza al reves:
cuando el simulador resuelve entradas por el circuito (spiceDrivenInputs), el
nivel sale del propio cableado. El INPUT_PULLUP del guest se reporta ahora como
gpio_pull, estampa una resistencia de 45k al riel de 3V3, y cerrar el pulsador
cortocircuita el nodo contra la pata que tenga al otro lado. Sale bien tanto para
un boton a GND como para uno a 3V3, sin que nadie asuma nada. El atajo se queda
solo para simuladores que se salgan del modelo electrico.
Aparte, dos arreglos de cableado:
- boardPinToNumber devuelve -1 (no null) para pines de alimentacion y masa, y
la guarda comprobaba `=== null`. Asi que la pata de GND de cada boton colaba
y registraba un SEGUNDO par de listeners apuntando al pin -1.
- c3-button y pico-button-led cableaban sus pulsadores a los pines '1a' y '1b',
que NO EXISTEN: el wokwi-pushbutton expone 1.l, 2.l, 1.r y 2.r. Esos dos
cables llevaban colgando desde siempre, asi que esos botones no han
funcionado nunca. Pasan a 1.l / 2.l, como el resto de ejemplos.
boardPinToNumber no tenia rama para 'cardputer-adv', asi que caia al return
null del final: cada cable a su cabecera EXT o al Grove Port A se conectaba a
nada. La pieza quedaba en el lienzo, el sketch leia un pin muerto y nadie
avisaba de nada.
La rama compartida de esp32 tampoco habria servido: recorta en 39 y este board
saca G40 en la cabecera. El S3 tiene 48 GPIOs.
Se anclaba a la esquina inferior derecha del lienzo y tapaba una parte del area
util del circuito, que es justo donde se trabaja. Quien pana y hace zoom no lo
necesitaba para orientarse, asi que se retira entero en vez de esconderlo tras
un interruptor mas.
Se van el componente y su CSS (no los usaba nadie mas) y la linea del listado de
novedades que lo anunciaba, que ya no seria cierta.
Las dos ramas habian divergido: master llevaba el modo lenguaje ESP-IDF puro
(#139) y v3.2 la ruta de compilacion IDF v5.5 para toda la familia ESP32 mas
los arreglos de venv/toolchain. Ambas tocaban espidf_compiler.py.
Los dos lados son ejes ORTOGONALES y se conservan enteros:
- use_idf5 / arduino_mode (v3.2): que arbol IDF usa el build (5.5 vs 4.4) y
si cabe Arduino-como-componente.
- pure_idf (master): el modo LENGUAJE que elige el usuario; sus ficheros son
las fuentes del componente main con su propio app_main().
Resolucion:
- _build_env acepta los tres. Un build IDF puro fuerza arduino_mode a falso:
la plantilla CMake mete el componente arduino-esp32 en cuanto existe
ARDUINO_ESP32_PATH, asi que dejarlo puesto compilaba el core de Arduino en
un build que no tiene sketch. Lo cazaron los tests de master.
- VELXIO_PURE_SKETCH solo con pure_idf, nunca con arduino_mode a falso a
secas: un target sin core arduino-esp32 sigue entregando un SKETCH al
traductor legacy y no debe tomar la rama del glob puro.
- La identidad del build-dir suma los dos tokens (|idf:N|ard:N y |lang:pure):
ningun par de esas combinaciones puede compartir un build/ configurado.
- La cadena de escritura de fuentes queda pure_idf -> arduino_mode -> legacy.
- sdkconfig: render de v3.2 (con target/use_idf5) mas el filtrado de simbolos
CONFIG_ARDUINO* de master cuando el build es puro.
test/backend/unit/test_espidf_compiler.py: los 7 tests que ya estaban rotos en
v3.2 (AttributeError: idf5_path, fixture sin actualizar desde que se anadio la
seleccion de IDF) vuelven a pasar.
Verificado: backend 293 pasan / 0 fallan (v3.2 traia 7 rotos); frontend 2268
pasan / 0 fallan en los dos shards.
connectMcuEdgesToService resubscribes its per-pin listeners whenever
pinNetMap changes. The subscription swept pin NUMBERS 0..63 and
reverse-mapped them to names ('GPIO2' on ESP32, 'GPIO17' on Pi) to match
against pinNetMap's keys — but those keys are the WIRE pin names ('2',
'4', 'A0'), so after the first solve the match failed for every pin and
the resubscription attached nothing. Any mid-run pinNetMap update then
silently killed the MCU-edge → SPICE path and the canvas froze at the
last solved state while the firmware kept toggling.
Masked until now because nothing perturbed pinNetMap mid-run on the
blink examples; pure ESP-IDF mode (#139) unmasked it — gpio_reset_pin()
leaves the internal pull-up enabled, the worker reports gpio_pull, the
handler requests an electrical resolve, pinNetMap gets a new identity,
and the ESP-IDF blink example's LED froze ON.
Fix: subscribe FROM the pinNetMap names, mapped to PinManager pins with
the same pinNameToArduinoPin the netlist collector uses (STM32 via
stm32PinNameToLinear), and hand schedulePin the netlist name so
handleMcuEdge's v_<board>_<pin> lookup hits the fast alterSource path
instead of a full rebuild per edge. The 0..63 sweep remains as the
pre-first-solve fallback. Also fixed pinNameToArduinoPin's dead 'GPIO'
branch ('GP' tested first turned 'GPIO32' into parseInt('IO32') = NaN).
Adds a third entry to the board language selector next to Arduino C++
and MicroPython: ESP-IDF. In this mode the user writes a plain ESP-IDF
project — app_main() entry point, FreeRTOS + driver APIs — and the
backend compiles it through the same ESP-IDF toolchain it already uses
for ESP32 Arduino sketches, just without the arduino-esp32 component.
Backend:
- CompileRequest.language ('espidf') threaded through the sync + async
compile paths and folded into the dedup job key (language='arduino'
and omitted hash identically so old clients keep dedupping).
- espidf_compiler: pure_idf flag. User files are written into main/
as-is (no Arduino.h wrap, no velxio_compat.h, Arduino library
resolution skipped), ARDUINO_ESP32_PATH is dropped from the build env
and VELXIO_PURE_SKETCH raised so the template CMake compiles the
user's own sources via a glob branch. Pure builds get their own
persistent build-dir variant through the eff_hash fold.
- QEMU WiFi compat for IDF-style code: esp_wifi.h/esp_wifi_init
detection sets has_wifi, and literal #define SSID/PASS plus
wifi_config_t designated initializers are normalized to the QEMU AP.
- CONFIG_ARDUINO_* lines are stripped from sdkconfig.defaults in pure
mode (the symbols don't exist without the arduino component).
Frontend:
- LanguageMode gains 'espidf'; BOARD_SUPPORTS_ESPIDF covers the ESP32
family (Xtensa, S3, C3). Toolbar shows the option only for those.
- Switching modes seeds a main.c blink skeleton (app_main + gpio
driver), mirroring the MicroPython main.py flow.
- compileCode sends language='espidf'; run/stop paths are unchanged
(the QEMU worker consumes the same merged flash image).
- New gallery example: esp32-idf-blink (LED + resistor on GPIO 2).
Tests: unit coverage for the build-env switch, IDF wifi normalization,
job-key variance, file-group seeding and the new example; verified
end-to-end in a container from the prod image (pure build produces a
bootable flash image; Arduino-mode build unchanged, same variant hash).
componentToSpice/isSpiceMapped now consult a pro-registered mapper table after
the static MAPPERS, so a private build can give its closed components a SPICE
model (e.g. the DFRobot Gravity analog sensors emit a voltage source at AOUT).
Empty in a pure OSS build. Mapper type exported.
Round Display, Grove Gesture and ReSpeaker Lite now advertise themselves in
the OSS picker like the M5Stack matrices; they auto-hide in any build whose
overlay merges the real components (registry.getById).
A wire to a pro board's Dx pad (XIAO 'D2', etc.) did nothing because
isBoardComponent only knew the OSS board-id list, so the electrical/sensor
chain skipped the board endpoint. It now also returns true for any
proBoardRegistry kind, so boardPinToNumber (which already consults the pro
def's pinToNumber) resolves the Dx name. Fixes the numeric-alias-only
workaround in the XIAO examples.
registerSensorControls() lets a private build add SensorControlDef entries for
sensors it ships outside the OSS tree (e.g. the DFRobot Gravity analog family)
so they get the live slider panel; every SENSOR_CONTROLS lookup now goes
through getSensorControl(id) which falls back to the registered map. Dead code
in a pure OSS build, same contract as proBoardRegistry / registerComponentDoc.
xiao-esp32s3-sense / xiao-esp32c6 / xiao-rp2040 advertise themselves in the
OSS picker like the other hosted-only boards; the ads auto-hide in any build
whose overlay registers the real kinds (same BOARD_KIND_LABELS contract).
filteredComponents' new registryVersion dep evaluated in its useMemo deps
array while the const was still in the temporal dead zone (declared further
down the component) — 'Cannot access N before initialization', white screen
on every page. Hooks moved up next to the registry declaration.
The @pro overlay import is dynamic, so board/component registration can land
AFTER the picker mounted and memoized its lists. allBoards had frozen deps —
if the picker rendered first, overlay boards (M5Stack Core, Cardputer,
Pimoroni, C6) vanished for the whole session while their ONLINE ads were
already hidden; the component grid + ONLINE component ads flipped between ad
cards and real entries depending on who won the reload race (different SVG,
ONLINE badge appearing and disappearing, wrong hover thumbnail).
proBoardRegistry and ComponentRegistry.mergeComponents now bump a version and
notify subscribers; the picker's allBoards / filteredComponents /
visibleComponentAds memos key off those via useSyncExternalStore — same
contract as proRoutes and registerProExamples.
- The card preview creates the live element but only forwarded
defaultValues.value, so variants sharing a tag rendered identically (both
M5Stack Chain matrices showed the dark RGB housing — the mono flag never
reached the element). Forward every defaultValues entry, matching what
DynamicComponent assigns at placement.
- The hover datasheet panel sat at z-index 2000 while the picker overlay was
raised to 9000 (above the AI chat), hiding the popover behind the very
modal that summons it. Raise it to 9100.
Replaces the static hero-editor screenshot with the animated
estacion-meteorologica-esp32.gif (whole circuit executing). contain +
matching background so the full circuit stays visible instead of
cover-cropping it.
Boards with built-in hardware (LCD on the element's own canvas, speaker,
on-board buttons/keyboard) need run-time wiring between the DOM element and
the board's simulator shim / ESP32 bridge. One generic SimulatorCanvas effect
now hands those handles to the overlay's attachBuiltins shortly after run
start and runs its cleanup on stop — no board names in the OSS tree.
registerProExamples() now notifies useSyncExternalStore subscribers (same
contract as proRoutes): a direct URL to an overlay-registered example resolved
before the dynamic @pro import landed and stuck on the 404 branch. The three
example pages subscribe to the version counter.
registerProBoards() lets a hosted overlay ship boards outside the OSS tree as
data-only definitions: registration patches the exported BoardKind maps
(labels / FQBN / MicroPython) so every existing read site keeps working, and
the sites a map can't cover consult the registry — canvas render (custom
element or overlay render fn), BOARD_SIZE, pin-name mapping, picker list +
descriptions + tag, ESP32 family routing, in-browser simulator construction
and firmware load (structural ProBoardSimulator contract, duck-typed PIO
attach/detach), built-in bridge sensors, and a CS-gated built-in microSD
(sdCsPin -> sd_card.cs_pin worker config). Esp32Bridge additionally gains the
esp32-c6 machine type + TX pin (public chip knowledge — the C6 compile path
already ships) and a generic sendKey() for built-in matrix keyboards.
registerProExamples() appends gallery examples at runtime; the board ONLINE
ads recompute at render so registration hides them. OSS behavior without an
overlay is unchanged — the registry is dead code, same as the other seams.
Components that only exist in the hosted editor now advertise themselves in
the picker exactly like the online-only boards do: ONLINE_ONLY_COMPONENT_ADS
(same module as the board ads) renders an ONLINE-badged card that links to
velxio.com, auto-hidden in any build whose ComponentRegistry has the real
component (the hosted overlay merges it in — no per-build switches). First
entries: the M5Stack Chain RGB/Mono 8x8 matrices. componentDocs gains
registerComponentDoc(id, raw) so an overlay can supply the hover datasheet
for components it injects at runtime.
Gallery templates and agent-loaded projects can store element tag names
("wokwi-lcd2004") where the registry keys by the bare id ("lcd2004").
getById now falls back to the stripped id, so such a component renders
instead of sitting invisible in the store — a real agent session shipped
an LCD counter whose LCD existed in the store, was wired and validated,
and simply never appeared on the canvas.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Root cause of "el agente construye el reloj, dice que funciona, pero el
display queda en blanco hasta recargar la página" — diagnosed by driving
the live agent end-to-end and instrumenting the element:
The 7-segment part simulator caches its state (segments, digitValues,
digitEnabled) in a WeakMap keyed by the DOM element, sizing it from
element.digits at FIRST access. The agent builds incrementally: it adds
the display with the default digits=1 and only then sets digits=4 — so
the cached state was born in single-digit mode. Every later attachEvents
(compile bumps hexEpoch → re-attach with the finished wiring) kept
consulting the stale state: it subscribed COM.1/COM.2 (which don't exist
on a 4-digit part) instead of DIG1..DIG4, and because those resolvers DID
attach, the all-digits-on fallback never kicked in either. Result: no
digit ever enabled, no flush ever ran, values stayed a frozen 8-zero
array. A page reload "fixed" it because the fresh element mounted with
digits already 4.
get7SegState now compares the cached digit count against the element's
current value and rebuilds the state when they differ, so any re-attach
after a digits change subscribes the right pins.
Test: attach with digits=1 (COM subscribed), set digits=4, re-attach →
DIG1..4 subscribed, and a segment+digit pulse actually lights values[0]
in the 32-slot array.
Verified live: the exact agent prompt that produced a permanently blank
display now shows the multiplexed digits + blinking colon in-session,
no reload.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The stop-first guard in the Run button only fires when board.running is
true, but the Run button is DISABLED while a board runs — so by the time the
user can actually click Run, the board has already disconnected
(running=false) and the guard is a no-op. The failure lives one level down:
Esp32Bridge.connect() early-returned whenever a socket lingered in ANY
non-CLOSED state (CONNECTING/OPEN/CLOSING). The agent's run_simulation
leaves such a socket; when its backend QEMU session ends but the frontend
socket is still zombie, the user's Run → startBoard → connect() did nothing.
A page reload "fixed" it only by constructing a fresh bridge.
connect() now tears down any lingering socket (detaching handlers + close)
and opens a new one to the same session key — exactly what the reload does,
which is why the reload always worked. The backend already handles a new WS
replacing an existing session, so no reload is needed.
Test: connect() on an OPEN socket closes the old one and boots a fresh
start_esp32 (esp32-dht22-flow).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Two issues from a real ESP32 7-segment clock the agent built.
Run after the agent didn't work until a page reload
---------------------------------------------------
The agent's run_simulation leaves the ESP32 board RUNNING (live QEMU
WebSocket). Esp32Bridge.connect() is a no-op while the socket is non-CLOSED,
so the user's subsequent Run click called startBoard() → connect() → did
NOTHING. And if the backend QEMU session had since died while the frontend
socket lingered (CONNECTING/OPEN/CLOSING), the user saw a dead sim that only
a reload cleared — exactly the "di Run y no funcionó; recargué y sí" report.
The Arduino/C++ QEMU path now stops a running board first (closing the WS),
waits for it to settle, then boots fresh — the MicroPython path already did
this for the same reason.
Wires painted over the 7-segment digits
----------------------------------------
The agent bridges each segment strip to its resistor from a breadboard hole
that is physically UNDER the seated display; on the flat canvas those wires
(wire layer z 35) painted over the digits (component z 1) — "casi ni se ven
los dígitos". A large-bodied display seated on a breadboard now renders
ABOVE the wire layer, so its face occludes the wires crossing it exactly as
the real part's body would (the wire passes behind it to reach the hole).
Scoped to display bodies (7segment, matrix, oled, lcd, ili9341, led-ring…)
and only when actually seated; thin parts and free-floating displays are
untouched. The pin overlay + seated-pin markers share the display's stacking
group, so they rise with it and wiring still works.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Fixes the reported breadboard wiring UX ("requerimos un vocabulario"):
Vocabulary implemented (breadboardOccupancy.ts, pure + unit-tested):
- 1 hole = 1 wire. A hole already holding a visible wire can't start a
new one — clicking it SELECTS that wire. This is the core fix: wires
running hole-to-hole across the board were impossible to select
because the pin overlays swallowed every click and silently started a
new wire (so the top horizontal rail wire was un-deletable).
- Same 5-hole strip / rail = one net. When a new wire end lands in an
occupied hole (a seated leg or another wire), it shifts to the
NEAREST FREE hole of the same group — electrically identical, the
real-world "bridge to the next hole in the row". Never crosses strips.
Two selection bugs behind the symptom:
- Click on a wire lying over the breadboard BODY now selects the wire
instead of opening the breadboard's 830-hole property dialog (that
list popping over everything was the "se sobrepone la lista de todos
los puntos" report). Guarded so the bubbled canvas click doesn't
re-toggle the fresh selection.
- Click on a hole occupied by a wire selects the wire (handlePinClick),
so wires anchored in holes are reachable at all.
Jumper colors (like a real kit — a board of identical green wires is
unreadable, "se ven todos verdes"):
- Power-rail holes mandate red (tp./bp. = +) / black (tn./bn. = −).
- Other breadboard holes get a random jumper-palette color on manual
draw; red and black are reserved for rails.
- jumperColorForId gives agent/deterministic callers a stable per-wire
color across reloads.
Tests: breadboard-occupancy.test.ts (12) — findWireAtHole (skips seating
wires, topmost wins), resolveFreeHole (same-strip shift, no cross-strip,
rail shift, passthrough), color policy (rails, palette determinism,
red/black reserved).
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Generic platform work ported from the internal line:
- Esp32BridgeFactory seam + rebuildEsp32Bridge + sync-I2C seam: a
substitute simulation bridge (e.g. the hosted editor's in-browser JS
emulators) can be installed without touching OSS code
- Component datasheets: hover popover (ComponentInfoPanel) + markdown
docs for common parts
- Per-chip S3/C3 basics examples for the gallery
- .gitignore: never allow pro emulator mask ROMs into the OSS repo
New: online-only board showcase. Boards implemented by the hosted editor
(ESP32-C6, M5Stack Core, Cardputer ADV, Pimoroni RP2350 family) appear
in the picker as advertisement cards with an ONLINE badge linking to
velxio.com, where they are free to use. Ads auto-hide in any build that
registers the real BoardKind.
Running a multiplexed 4-digit 7-segment clock on ESP32/QEMU froze the
browser for minutes after Run — evaluate probes waited 40-90 s, and before
the first fixes the sim WebSocket eventually died (code 1006) with the page
never recovering. CPU-profiled on staging; four compounding per-GPIO-edge
costs, in profile order:
updateComponentState minted a new components array per edge
------------------------------------------------------------
The store setter rebuilt `components` (and one properties object) on EVERY
edge even when the state didn't change. The breadboard is direct-wired to
13 board pins, so segment toggles produced thousands of store sets per
second; every subscriber re-rendered each time, and the canvas subscription
effect (deps: [components, ...]) re-subscribed all pin listeners in a loop.
Now a no-op guard returns prevState unchanged, and breadboards are treated
as self-managed (they have no visual on/off state to echo).
CompilationConsole re-rendered every log line per editor render
----------------------------------------------------------------
The post-compile console holds hundreds of lines; each render called
Date.toLocaleTimeString per line (~0.2 ms each — it builds a fresh Intl
formatter every call). Profile: 162 s of self time in LogLine over a 337 s
window, in ~150 ms tasks. LogLine is now memoized (entries are immutable),
timestamps go through one shared Intl.DateTimeFormat, and the console
itself is React.memo'd against parent re-renders.
Per-edge full SPICE re-solves
------------------------------
PinManager requested a FULL netlist rebuild+solve on every 'mcu' edge.
Now only the edge that newly classifies a pin as MCU-output triggers the
rebuild (that's what emits the pin's V-source); steady-state updates flow
through connectMcuEdgesToService's per-pin coalesced alterSource path.
The start.ts resolve hook is trailing-throttled (33 ms) for the other
per-edge callers (RP2040, custom chips), the service's pending-edge queue
drains on a 33 ms gap timer instead of replaying back-to-back, and new
edges arriving inside the gap queue instead of soloing a solve.
STM32 / Pi reverse pin-name mappings added to connectMcuEdgesToService so
those boards keep fine-grained updates now that the full-tick storm is
gone (PA0/PC13-style and GPIO-style names never matched before).
wokwi-7segment re-rendered per segment write
---------------------------------------------
element.values now flushes at most every 8 ms per display (trailing write
guaranteed), instead of re-rendering the 32-shape SVG per edge.
Also: CLN (colon) pin support for 7-segment clock faces — wired CLN now
drives colon/colonValue in both the attachEvents path and the QEMU
onPinStateChange path; it was silently ignored, so clock colons never lit.
Verified on staging with the failing project: main-thread probes drop from
40-90 s waits (324 long tasks, 52.6 s blocked in 150 s) to 5-11 ms
(2 long tasks, 179 ms), display shows 12:00 with the colon blinking at
1 Hz from the first seconds after Run.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The registry's Pi Zero/1/2/3/4/5 component entries rendered the live
velxio-raspberry-pi-* element clipped to a sliver and carried no PRO
marker. Reuse the board illustrations keyed by tagName (Zero/1/2
intentionally share the Pi 3 art) and show the shared gold PRO pill on
any component whose id is a pro board kind (Pi Linux family + STM32).
The Pi 4/5 cards instantiated their live custom element at natural size
with a CSS scale; the transform keeps the unscaled layout box, so the
100px thumbnail clipped the board to a narrow vertical sliver. Use the
existing board illustration PNGs with objectFit contain, same as Pi 3.
The PRO badge on gated boards grows to a readable pill with a drop
shadow.
Three router bugs found by replaying a real agent session (reloj_3333) where
wires ran straight across a seated 4-digit display. Each fix is covered by a
regression test built from the failing geometry.
Endpoint inside an obstacle no longer drops the whole obstacle
--------------------------------------------------------------
Breadboard strips under a seated display start INSIDE its inflated bbox, so
the "rects containing an endpoint are dropped" rule deleted the display as
an obstacle for every wire leaving those strips — 15 wires crossed it end to
end. The rect is now carved instead: an escape corridor (ROUTE_MARGIN wide)
from the endpoint to the chosen edge, with the rest of the body still
blocking. Side blocks overlap the endpoint's row by 1px, or the strict
segment-hit test leaves the row as a free seam straight across the body.
Overlapping rects escape in ONE shared direction
------------------------------------------------
Seated resistors overlap heavily (19px pitch, ~66px inflated boxes). When
each containing rect picked its own nearest edge, the corridors pointed
different ways and walled each other off — A* found no exit, fell back to
the direct elbow, and the wire crossed the display anyway. The escape
direction is now chosen once against the UNION of containing rects and
every carve uses it, so the corridors chain into a continuous exit.
Null route materialises the CHECKED elbow
------------------------------------------
routeAroundObstacles returns null when the PREVIEW elbow (longer-axis-first)
is clear — but the re-route pass stored empty waypoints, which the renderer
expands as the horizontal-first corner: a DIFFERENT elbow the router never
validated. Three wires shipped crossing a display whose checked route was
clean. The pass now materialises previewElbow explicitly, exactly like
finishWireCreation always did.
Verified E2E: the same agent prompt that produced 15 crossings now builds
the ESP32 clock with ZERO wire segments crossing the display body.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Extends the existing component-avoiding A* (wireAutoRoute.ts) into the full
auto-router the canvas was missing. Three pieces:
Wire avoidance with soft costs
------------------------------
Component bodies stay hard-blocked, but wires get graded costs: running
parallel on top of another wire (within an 8px corridor) is charged per px,
a perpendicular crossing costs a small fixed amount, and bends keep their
existing penalty. Crossings must stay possible — hard-blocking wires makes
dense boards unroutable and everything would degrade to the default elbow.
The compressed grid gains "corridor" coordinates 8px to each side of every
wire segment, so the router actually has a lane to run BESIDE a wire; that
is also what lays multi-wire runs out as a tidy side-by-side bus, since
each new wire routes seeing the previous ones. Wires sharing an endpoint
with the route are exempt (wires meeting on a pin must touch there), and
only wires within 120px of the route's bbox participate, keeping the grid
under the coordinate cap on dense canvases.
autoRouted: the system owns the shape until the user takes it
-------------------------------------------------------------
New Wire flag, set by pin-to-pin creation and by agent add_wire. Every
shape-editing gesture (segment drag, waypoint drag, waypoint insert — five
call sites) clears it: from that moment the wire is hand-authored and is
NEVER re-shaped, exactly where the user put it. Wires from older projects
have no flag and are treated as hand-authored.
recalculateAllWirePositions re-routes flagged wires after endpoints move
(component drag end, agent batches, mount settle — never per drag frame).
This is also what routes agent wires at all: they are created before their
elements mount and before pin coords are final, so creation-time routing
is impossible; the settle-timer recalc routes them once geometry is real.
Live routed preview
-------------------
updateWireInProgress routes start->cursor (throttled to 40ms) and the
preview renders that path, so the wire dodges components and wires AS THE
MOUSE MOVES instead of snapping into shape on the final click. Hand-guided
previews (user-placed waypoints) keep the classic path untouched.
Verified in the live app: an agent-built breadboard circuit shows 0 wire
overlap px and 0 body crossings across all wires, and a hand-started wire
aimed collinear with an existing run previews 21px beside it, overlap 0.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
An ESP32 clock built by the agent stayed dark while QEMU was verifiably
emitting hundreds of GPIO edges per second (437/pin measured on the live
websocket). Reload did not help — this was not the seating race. Two
independent tracing bugs, reproduced from the real project circuit (fixture
included) and each sufficient to kill the display:
Boards added at runtime were invisible
--------------------------------------
isBoardComponent matches static id prefixes ('arduino-uno', ...), which only
covers the default board. Every board added at runtime gets a minted UUID id
— the agent's add_board always does — so traceDetailed treated the board
endpoint as an unknown component and resolved null, and SimulatorCanvas's
direct-wire subscription path skipped it entirely. Every Uno project happened
to work because they reuse the default board whose instance id IS the literal
'arduino-uno'. Both sites now consult the live boards list first, keeping
isBoardComponent as the legacy-id fallback.
Strip walking missed wires stacked on one hole
----------------------------------------------
The breadboard group walk continued the trace from every OTHER wired hole of
the strip, excluding the arrival hole by name. But two wires may legitimately
share one hole — the agent bridges strips straight into the seat hole (8 of
this circuit's 9 bridges land exactly on a resistor's own hole), which is
electrically identical to using a free hole of the strip. The name exclusion
made those junctions dead ends. Exclusion is now by incoming WIRE id, so
same-hole connections resolve; the depth bound already prevents ping-ponging
between two wires of one net.
With both fixes the exact saved circuit resolves every display pin to its
GPIO (A..DP -> 32,33,25,26,27,14,12,13; DIG1..4 -> 15,2,4,5; COM -> GND) and
the live project now shows 12:00 on the real QEMU simulation. traceDetailed
is exported for the regression test, which drives the real store with the
real circuit.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The ESP-IDF compile path stages exactly the libraries declared in the
example (no transitive resolution), so Adafruit_GFX.h failing to find
Adafruit_I2CDevice.h broke esp32s3-ili9341-hello and esp32-oled-4pin-i2c
with 'Compilation produced no firmware'. The other ESP32 GFX examples
(esp32-oled, esp32-bmp280) already declare BusIO explicitly.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
A part can land in the store at its FINAL position before its element
mounts: the agent streams add_component and the seating move in one batch,
and updateComponent's reseat then finds no DOM (computeSeating null) and
keeps the empty seating. Nothing re-derived it afterwards — the agent-side
seat correction skips when the position needs no nudge, and 'pininfo-change'
only fires on pin-SET swaps, not on plain init. Meanwhile run_simulation
executes right after the SSE round, before the correction's animation frame.
Net effect, reported by a user as a suspicion that turned out exactly right:
a clock the agent built and ran in one turn showed a dead display, while
reloading the project and running it worked — bb seating wires are persisted,
so on reload they exist before Run is pressed.
DynamicComponent now reseats once the element's pinInfo first becomes
measurable (same polling cadence as the pinInfo-ready effect), which closes
the hole for every path that stores a final position before mount: agent
batches, project load, undo. To keep that free on load,
reseatComponentOnBreadboard skips the store write when there is nothing
seated and nothing to clear — otherwise every off-board part would churn the
wires array identity once per mount.
Verified live end-to-end: agent adds + seats + wires + compiles + RUNS in a
single turn; the seated LED blinks immediately (4 transitions sampled), with
all 4 seated-pin markers present — no reload needed.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Seating is otherwise invisible — a seated pin connects to its hole through a
zero-length `bb` wire that never renders — so a user couldn't tell a part
that merely sits ON the board from one whose pins are actually connected.
This was reported after placing parts that looked seated but gave no signal
they were wired in.
SeatedPinMarkers draws a small always-on green dot (Wokwi-style) on each pin
that has a `bb` wire, derived once per render from the store's wires
(component pin = wire start). Non-interactive layer below the wire-target
hit boxes; only breadboard-seated pins light up, so board-wired builtins stay
unmarked — exactly the "seated vs connected" distinction that was missing.
The per-pin rotation math (rotate about the wrapper centre, which the overlay
layers live outside of) is extracted from PinOverlay into a shared
`rotatePinLocal`, so the dots and the wire-target boxes can never drift apart
under rotation. A test asserts rotatePinLocal agrees with calculatePinPosition
at 0/90/180/270°.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The agent computes exact hole assignments server-side but can only send an
approximate canvas x/y, because the rotation pivot is the DOM wrapper centre
and the wrapper includes a text label the server cannot measure. Under
rotation that left seated parts off by up to ~4 px — enough that a diode
(pins 7.5 pitches apart) half-seated: computeSeating found no hole for the
far pin and it went electrically dead.
resolveSeatPosition corrects it in the browser by pure translation: read
where the anchor pin actually is from live DOM geometry (real pivot), read
where the solver put it, shift the whole part by the difference. Every other
pin follows because pin-to-pin offsets are pivot-free. It never re-solves, so
it cannot slide the part to different holes and the validated netlist holds.
The anchor target is the solver's anchor position in breadboard-element
space, WITH its sub-pitch centroid translation — not the hole centre.
Targeting the centre would re-break the diode (far pin 4.8 px out). Verified
against real rendered geometry in a browser: resistor and diode at 90° both
seat within the intrinsic lattice residual (0.6 / 2.4 px).
Applied via a `seat` payload on the move_component effect (velxio-prod
overlay); this commit is the resolver + tests.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Three changes, all driven by a real project where a 4-digit 7-segment clock
was unreadable and half its parts were not actually seated.
Labels on hover only
--------------------
Eight vertical resistors at 19 px pitch rendered eight 93 px "Resistor 220 Ω"
labels on top of each other, hiding the parts and the breadboard holes; the
SPICE overlay added ~40 more `0uV` pills. Both are now revealed on hover:
hovering a part also lights up the voltages of every wire touching it.
The label is hidden with OPACITY and stays in flow. pinPositionCalculator
derives the rotation pivot from wrapper.offsetHeight, so taking it out of
flow would move the pins of every rotated component in every saved project.
Seat-on-drop
------------
The drag-time magnet only aligned the anchor pin and assumed the rest
followed, which is how parts ended up HALF-seated: some pins in holes, the
rest dead in the air. It looks mounted in a screenshot and silently breaks
the circuit. On release we now re-solve properly — nearest position where
EVERY pin is in a free hole, sliding past occupied columns — via the new
solvePlacement/seatOnDrop. Geometry comes from the element's own pinInfo,
so there is no part whitelist.
Sub-pitch translation
---------------------
solvePlacement first assigned pins to holes at half-pitch, then translates
by the centroid of the residuals before judging fit. Pinning the anchor dead
centre refused every off-lattice footprint: a diode spans 7.5 pitches, so
one leg landed 4.8 px out. Shifted 2.4 px, BOTH legs sit inside tolerance —
what bending the leads does on a real board. Measured over the catalog this
takes seatable parts from 87 to 125 of 152; diodes, transistors, regulators,
optocouplers and flip-flops are rescued with no artwork change.
Staying under SEAT_TOLERANCE (< half pitch) keeps each pin's nearest hole
unambiguous, so computeSeating resolves the same holes and the netlist is
unaffected by the small offset.
Also: refuse a placement that would put two of a part's own pins in one
strip. A column strip — and far worse, a power rail — is a single net, so
such a seating shorts the part to itself. Without it a 7-segment happily
lays its pins across a rail. And deduplicate pin names before solving:
calculatePinPosition resolves by name and returns the first match, so a
board carrying GND x5 collided with itself and was refused outright.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Root cause of the 'digits=4 display seated with the 1-digit COM pinout'
bug: property values arrive as STRINGS (agent set_component_property,
the property dialog's text inputs) and were assigned to the web
component verbatim — wokwi's 7segment does switch(this.digits) with
numeric cases, so el.digits='4' silently fell back to the 1-digit
pinout (and 'false' stayed truthy for boolean props like colon).
- DynamicComponent now coerces string values to the TYPE of the
metadata default for that key (number/boolean) before assigning.
- New pininfo-change listener: when a property swaps the element's pin
set (digits, flip, pins edge), the elements announce it — re-derive
the breadboard seating then, with the fresh pinout, instead of never.
Every resistor variant ('resistor' + 'resistor-<value>') now lands on
the canvas rotated 90 degrees: reads better, takes less horizontal
space, and drops straight into breadboard columns. Explicit rotations
in metadata defaults are respected. The breadboard auto-vertical drag
check widens from the two-entry set to the same prefix predicate, so
preconfigured variants (resistor-330 etc.) rotate on the board too.
Parts now plug INTO the breadboard instead of using it as a junction box:
- Drag magnetism: while dragging, the part's anchor pin snaps to the
nearest hole center (9 px range, 9.6 px grid) so parts land perfectly
aligned, like Wokwi.
- Seating: every pin within 4 px of a hole gets an invisible zero-length
wire (Wire.bb) from pin to hole — the exact model Wokwi persists as
["r1:1","bb1:6t.b","",["$bb"]]. Electrically they are ordinary
wires, so the netlist builder, digital trace and SPICE need zero
changes; they are simply not rendered and not hit-testable. Seating
re-computes on every move/rotation (updateComponent), and moving the
breadboard carries its seated parts along.
- Resistors auto-rotate to vertical when dragged over a breadboard
(their 58.8 px pin span bridges the center trench rows b-f exactly).
- Seat tolerance 4 px: absorbs the worst element pin-spacing residual
(~1.6 px) while staying under half the hole pitch, so a pin is never
ambiguous between holes.
Wokwi interchange fixes that fell out of the diagram.json research:
- import maps the top-level rotate attr onto properties.rotation
(previously every rotated part imported flat) and export emits it
back as rotate instead of leaking it into attrs;
- $bb / empty-color connections import as bb seating wires and export
back as ["$bb"] entries, so parts-on-breadboard projects round-trip;
- wokwi-breadboard-half aliases to the full breadboard (hole names are
a strict superset, so every connection stays valid).
Breadboard elements now export their pure hole grids and import cleanly
without a DOM (node tests); geometry + store seating covered by
breadboard-snap.test.ts and breadboard-seating.test.ts.
Three stale-project-identity fixes from reviewing the New-workspace flow:
- New workspace (web): handleNewClick cleared the workspace and the
current project but left the browser on the old /user/slug URL — a
refresh (or back-button pop) silently reloaded the OLD project over
the fresh unsaved workspace. Now replaceState's to the localized
/editor (replace, not push, so no back-entry points at the stale
project route).
- New workspace (desktop menu): same URL fix for the newProject menu
action, which cleared identity but never left the project route.
- .vlx import: importVlxFile mutated the stores WITHOUT clearing
currentProject — with a saved project open, autosave saw the
imported content as dirty edits on the old projectId and silently
PUT the .vlx contents over the user's saved project (and pushed the
clobber to GitHub on linked projects). Now severs identity first,
same guard loadExample.ts already documents.
verifyCircuitFromStore() builds the worst-case snapshot (every wired
digital pin driven HIGH) and solves it — extracted verbatim from
EditorToolbar's runVerification so programmatic runners (editor
extensions, agents) can gate their own run paths on the same rules.
No behavior change for the Run button.
Creating a wire with a direct pin-to-pin click (no user waypoints) now
routes around other components' bounding boxes instead of crossing
them. Routing happens exactly once, at creation: the routed corners are
stored as ordinary waypoints, so every later manual edit stays where
the user puts it — never re-routed.
Router (utils/wireAutoRoute.ts):
- tries the preview elbow first (clear -> keep existing behavior and
the WYSIWYG shape), then the opposite elbow, then A* over the
compressed grid spanned by pin coordinates and obstacle edges
inflated by an 8 px clearance, with a 40 px per-bend penalty so
straighter routes win
- obstacles are component boxes only (never boards — pins sit on both
board edges and detouring around a board produces absurd routes),
excluding the wire's own endpoint components, measured from the
rendered DOM; rects containing an endpoint are dropped
- any failure (walled-off target, oversized grid, no DOM) falls back
to the previous direct-elbow behavior
Hand-aligning a dragged segment could leave two parallel runs a pixel
or two apart, joined by a tiny perpendicular step, because alignment
snapping only ever targeted OTHER wires' geometry.
- Segment and bend-point drags now also snap (6 px threshold) against
the dragged wire's own points — excluding the ones being dragged —
so a run clicks into line with its neighbour and the exact
simplification fuses them into one segment on commit.
- fuseMicroJogs: parallel runs offset by under 2 px joined by a tiny
step are aligned automatically (the run not anchored to a wire
endpoint moves; shorter run yields when both are free). Applied at
render time and in renderedToWaypoints/normalizeWireWaypoints, so
already-saved crooked wires display straight without touching data.
Three wiring quality fixes:
- Rounded corners: every bend now renders as a quadratic curve
(radius 7, clamped to half the shorter adjacent segment), with
round line caps/joins. Segment/waypoint drag previews and the
in-progress preview use the same path builder so the look is
consistent everywhere.
- Degenerate geometry cleanup at render time: the expanded polyline
is simplified (duplicates, collinear runs, U-turns) before the
path is emitted, so wires saved with junk waypoints no longer
render on top of themselves. Stored data is untouched until the
user edits the wire.
- WYSIWYG commit: finishWireCreation materialises the final-leg
elbow exactly as the live preview drew it (longer axis first) and
normalises the stored waypoints. Previously the committed wire
fell back to horizontal-first and visibly changed shape on click.
simplifyOrthogonalPath moved to wireUtils (re-exported from
wireHitDetection for existing imports); the duplicated inline
expansions in SimulatorCanvas now use the shared helper. Waypoint
dots on idle wires removed (visual noise); endpoint dots stay.
Monaco's focus sink is a plain div (.native-edit-context under the
EditContext API), neither an input tag nor contentEditable, so the
typing guard missed it and a mapped letter typed into the code editor
pressed the button. Treat any keydown originating inside .monaco-editor
as typing.
Any pushbutton (pushbutton / pushbutton-6mm) can now be driven from the
keyboard. Assign a key from the component property dialog — a keycap
control captures the next keypress (Escape cancels, modifiers alone are
rejected) — and a keycap badge next to the component label shows the
mapping on the canvas. Several buttons may share one key on purpose;
the dialog shows a hint when that happens.
At runtime a global bridge translates keydown/keyup into the same
button-press / button-release DOM events the mouse fires on the wokwi
element, so every simulation path (avr8js pin logic, SPICE-driven
inputs, the QEMU GPIO bridge, the pressed visual) behaves identically
to a mouse click. Guards: ignored while typing in inputs or the code
editor, ignored with Ctrl/Alt/Meta held, auto-repeat collapses into one
long press, and window blur releases everything so no button sticks
after Alt-Tab.
The binding is stored as the component's 'key' property, so it
round-trips through project saves and .vlx exports and is undoable like
any other property edit. Strings added to all 9 locales.
Convert the remaining window.confirm() call sites to the in-app
MessageDialogHost, extended with a new confirm mode (Cancel + Confirm
buttons, optional danger styling) via showConfirmDialog().
Sites converted:
- New workspace (EditorPage)
- Load project / delete file (FileExplorer)
- Overwrite SPIFFS file (BoardOptionsModal)
- Delete VFS node (VirtualFileSystem)
All dialog strings are internationalized across the 9 supported locales
(en, es, pt-br, it, fr, zh-cn, de, ja, ru); the two previously
English-only modals now pull from i18n too.
A breadboard is the physical base of a circuit — boards, components and
wires all plug into it — so it should never cover them. Pin its group at
z-index -1 (below boards z 0, components z 1/2, wires z 35), ignoring
selection. Detected by metadataId prefix 'breadboard' (breadboard,
breadboard-mini). Its own pins stay wireable wherever it's not covered.
The dense-component threshold (>60 pins) meant boards like the Arduino
(31 pins) still painted every pin blue on hover — a wall of squares. Drop
the threshold: every component/board now keeps its squares invisible and
lights up only the ONE under the cursor (matching the breadboard, which
users already liked). Wiring mode still paints them all — all valid targets.
Removing isActive from board showPins (prev commit) exposed a latent bug:
BoardOnCanvas put onMouseEnter/onMouseLeave on the drag overlay, a SIBLING
of PinOverlay. Moving the cursor from the overlay onto a pin square fired
the overlay's mouseleave, cleared hoveredBoardId, and hid every pin right
as you reached one — so a board pin could never be clicked to start a wire
(breadboards were fine: their group wrapper owns both body and pins).
Move the hover handlers to the wrapper div that contains the board body,
the drag overlay AND the pin squares, so moving among them never fires
mouseleave. Board dragging (onMouseDown on the overlay) is unaffected.
Three UX fixes to the pin squares:
- Pins show on hover or while wiring only. The active board and the
selected component used to light every pin permanently.
- Dense components (>60 pins — breadboards) don't paint a wall of blue
on hover: squares stay invisible and light up individually under the
cursor. While a wire is in progress every square paints again since
they're all valid targets (new `wiring` prop threaded to PinOverlay).
- mousedown on a pin square stops propagation, so press-and-drag from a
pin no longer pans the canvas.
Two stacking bugs:
1. Pin overlays used a global z-index 30 while component bodies sit at
z 0-5, all in .canvas-world's single stacking context — so a covered
component's pins painted on top of whatever covered it (arduino pins
showing through a breadboard). Each component/board group is now a
zero-size positioned wrapper that forms its own stacking context
(boards z 0, components z 1, selected z 2): pins stay above their own
body but are hidden together with it. .components-area becomes
pointer-events: none so board pins/drag overlays (now trapped at z 0)
keep receiving clicks through it; component groups re-enable their own.
2. The Add Component / board picker overlays (z 1000/2000) rendered
behind the pro AI chat panel (z 8000). Both now portal to <body> at
z 9000.
Verified in-app: board drag, component drag, wire creation from board
pin to LED, covered pins hidden (0/14 leak), covering component's pins
still clickable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
The Sign-in links navigate with a full page load (they mount in a
separate React root without Router context), which wipes the in-memory
Zustand workspace. New utils/workspaceDraft stashes the whole workspace
(reusing the lossless .vlx serialisation) to sessionStorage before that
navigation and restores it once when the editor remounts after login —
so a user who was building a circuit and signs in lands back on their
work instead of the empty starter board.
Strictly scoped to the login round-trip by a one-shot restore flag (not
a general autosave), and skipped when a named project is already loaded
so it never clobbers one. EditorPage calls restoreStashedWorkspace() on
mount; the pro overlay's auth links call stashWorkspaceForAuth() before
navigating.
useMessageDialogStore + <MessageDialogHost /> (mounted once in App.tsx)
give a themed in-app dialog callable from anywhere — React components
and plain .ts modules alike via showMessageDialog(msg, {kind}). Swaps
the native alert() calls in FileExplorer (import errors) and the
desktop menu (.vlx open errors, updater status) for it; the pro overlay
can reuse the same store.
The 'Create with AI' button referenced the Pro AI agent (hardcoded
prompt, agent event) inside the anonymous OSS dialog — chat/agent logic
must live in the velxio-prod overlay, not here. CustomChipDialog now
just exposes a generic `data-velxio-slot="custom-chip-actions"`
extension point (empty in OSS) and hangs its close handler on the slot
element so the overlay can dismiss the dialog after acting. The button
itself, its prompt and the Pro entitlement gate move to the overlay.
- 'Create with AI' button in CustomChipDialog dispatches the generic
velxio:agent-prompt window event (no-op without a listener — the pro
overlay's chat panel picks it up and prefills the composer).
- chipCompileService maps the hosted deployment's 401 gate to a human
'sign in to compile custom chips' message instead of a raw status
line. Self-hosted OSS keeps the route open and never sees either.
Registers upstream @wokwi/elements, velxio-elements/ and the element
classes living next to their React wrappers in velxio-components/ —
without pulling any React component graph. Used by pin-metadata
introspection in tests/generators (the pro agent's metadata export).
Google's auto-generated sitelinks for "velxio" surfaced docs/blog pages
but not the Editor (the primary app) or Home. Sitelinks can't be forced,
but an explicit SiteNavigationElement ItemList naming the primary nav —
Editor, Examples, Documentation, Pricing, About, in that order — is the
recognized structured-data hint for what the site's main sections are.
The examples page showed only ~3 cards per row (the grid was capped at
max-width 1200px with minmax(300px) columns), a tall header, and three
stacked filter rows (16 board tabs + category + difficulty) that pushed
the actual examples far down the page. Card thumbnails also letterboxed
with black bars on the sides.
- Grid: widen to 1680px + minmax(232px) columns → ~6 cols on a 1600px
screen (was 3). Cards smaller/denser (radius, info padding, title).
- Thumbnails: fixed 5:3 aspect-ratio container + object-fit:cover so the
preview fills edge to edge — no more black side bars.
- Filters: replace the search row + 16 board tabs + two button rows with
ONE compact toolbar (search + Board/Category/Difficulty dropdowns +
live count) and removable filter chips (badges with ×) + Clear all.
- Header trimmed (smaller title, less margin) so cards start high.
The red viewport rectangle read the React `pan` prop, but the canvas
pans by mutating panRef + the .canvas-world transform directly (no
setState until pointer-up, for zero-lag dragging). So while you dragged
the canvas the rectangle sat frozen and only jumped at the end. The
minimap now also receives panRef/zoomRef and mirrors them via a
requestAnimationFrame loop that setStates only on change, so the rect
follows the canvas every frame while keeping the canvas render-free
during the gesture.
Also: boards were all drawn as one fixed 120x90 world rectangle
regardless of the actual board, misrepresenting the layout. Use the real
per-board BOARD_SIZE (now exported from BoardOnCanvas) so each footprint
is proportional. And enlarge the map 100x75 -> 160x120 (same 4:3 as the
4000x3000 world) so it's usable.
The profile Duplicate dialog passes the chosen name, description and
visibility to POST /projects/{id}/duplicate. Options are optional — an
empty call still clones with the source name + " (copy)".
Pairs with the pro-overlay endpoint that clones a project (row + file
groups) into the caller's account. Lives next to deleteProject — the
OSS client already fronts the pro-only projects API when overlaid.
New optional `featured` metadata flag: ComponentRegistry stable-sorts
featured components to the front after loading (and indexes categories
from the sorted list, so per-category views keep the same order). The
two breadboards are marked featured in component-overrides.json — they
are everyday parts and now open the component grid instead of sitting
at the bottom below every diode.
Swap the programmatic SVGs for the real Fritzing breadboard art
(breadboard2.svg / miniBreadboard.svg from fritzing/fritzing-parts),
served from /component-svgs/fritzing/ and scaled x4/3 so the hole pitch
is the wokwi-standard 9.6 CSS px. pinInfo is computed from the measured
Fritzing hole grid (terminal col 1 at x=10.92, rails at x=25.33 in
5-hole groups; wokwi rows a-e map onto fritzing J..F on the full board,
1:1 on the mini; the red stripe marks the + row of each rail pair), so
wire endpoints land exactly on the drawn holes. The element reserves its
final size immediately and falls back to a light programmatic SVG with
identical geometry if the asset can't load. ATTRIBUTION.md records the
CC-BY-SA 3.0 license of the two SVG files.
Verified in the app: fritzing art renders for both boards, the LED
circuit through full-board column + mini column + ground rail still
lights, SPICE overlay shows the merged nets (5.00V on the pin-8 net).
Two velxio-native passive parts, rendered as web components with
programmatic SVG + precomputed pinInfo (velxio-breadboard 830 holes,
velxio-breadboard-mini 170). Pin names follow the Wokwi convention
(holes `18t.d` / `17b.i`, rails `tp/tn/bp/bn.N`) and the metadata ids
are `breadboard` / `breadboard-mini`, so wokwi diagram.json zips
import/export with no aliasing.
Internal connectivity (5-hole column strips, full-length power rails)
is centralized in utils/breadboardNets.ts and wired into every net
consumer:
- NetlistBuilder: unionBreadboardGroups joins wired holes per group at
the union-find level in buildNetlist, buildWireNetMap and
buildBoardPinNetMap — SPICE, the circuit verifier and the voltage
overlay all see one net per strip/rail with no extra cards.
- DynamicComponent.traceDetailed: the digital trace hops through every
other wired hole of the entered group, so parts wired through a
breadboard still resolve their board pin (2-terminal
PASSIVE_PIN_PAIRS could not express N-hole groups).
Verified end-to-end in the app: Uno pin 8 -> full-board column ->
resistor -> mini-board column -> LED -> ground rail -> GND lights the
LED, and the HUD shows the 3 collapsed SPICE nets. 8 new unit tests
(breadboard-nets.test.ts); netlist-builder + circuit-verifier suites
stay green.
Hardware-SPI (FSPI/GPSPI2) ILI9341 draw from an ESP32-S3: fill + rounded
rect + text via Adafruit_GFX/ILI9341. Exercises the S3 GPSPI2 controller
end to end (worker SPI stream + DC/CS/RST -> the canvas TFT decoder).
When addBoard promotes a board to active (first board, or the previously
active one was removed) it set activeBoardId without syncing s.simulator,
unlike setActiveBoardId which sets both. Parts that read s.simulator - SPI
displays (ILI9341) attach spi.onByte to the active simulator - then wired
onto the previous board's bus and never received data, so a boards[] ESP32
example with a TFT rendered black. Sync simulator to the promoted board
(no-op when the active board is unchanged).
Adds `velxio-ssd1306-i2c-4pin`, a native 4-pin SSD1306 OLED module
(GND/VCC/SCL/SDA) — the cheap 0.96" I2C board most beginners actually have,
matching Wokwi's board-ssd1306. The 8-pin `wokwi-ssd1306` breakout stays; this
is the distinct 4-pin part (issue #215). Same SSD1306Core render pipeline
(imageData/redraw) so the display paints identically; I2C-only, address via the
i2cAddress property (default 0x3C). Styled after the existing 8-pin element
(blue PCB, dark screen, corner holes, star).
Ships four "SSD1306 OLED (4-pin I2C)" gallery examples wiring it over I2C on
Arduino Uno (A4/A5), ESP32 (21/22), Raspberry Pi Pico (GP4/GP5) and STM32 Blue
Pill (PB7/PB6).
English is the default locale and is served at the root with no prefix, so
/en/project/x (a natural guess by analogy with /es/, /zh-cn/, ...) matched no
route and rendered blank. Redirect /en/* -> /* (and /en -> /), preserving query
and hash, so those URLs land on the right page while the canonical prefix-free
English URLs stay put for SEO. The other 8 locales already work under their
/<locale>/ prefixes.
Follow-up to the SSD1306 picker consolidation. All 68 saved projects that used
the retired ssd1306-i2c / ssd1306-spi ids have been migrated to the single
`ssd1306` (metadataId rewritten, protocol pinned), so the simulation aliases
are no longer needed and are removed.
- Auto-detect refined to CS-only: chip-select is the SPI-exclusive signal;
DC does NOT imply SPI (on the 8-pin module DC doubles as the I2C address /
SA0 line, so many I2C circuits wire it). Fixes false-SPI on those circuits.
- The `ssd1306` part honors an explicit `protocol` property when present
(migrated legacy projects carry it) and auto-detects otherwise.
- loadProjectState normalizes any lingering ssd1306-i2c/spi ids (old .vlx
files, pre-migration snapshots) to `ssd1306` + the matching protocol, so
removing the aliases can never blank an old import.
The SSD1306 was three picker entries — a generic `ssd1306` with a protocol
selector plus `ssd1306-i2c` / `ssd1306-spi` shortcuts (issue #101) — all the
same 8-pin wokwi-ssd1306 element. That is confusing for one physical module
(issue #215). Wokwi ships a single I2C-only part; this goes one better: a
single part that auto-detects the protocol from the wiring, like a real
breadboard — CS or DC wired to a GPIO means SPI, otherwise I2C. No protocol
switch to set, just wire it up.
Works on every board with an I2C/SPI bus (AVR, RP2040, ESP32 Xtensa, STM32).
The ssd1306-i2c / ssd1306-spi ids stay as backward-compat simulation aliases
for projects saved before the merge, but are removed from the picker. Adds an
i2cAddress property (0x3c/0x3d) matching the real module and Wokwi.
Note: ESP32-C3, Raspberry Pi 3 and the bare RISC-V board do not emulate I2C/SPI
peripherals, so no I2C/SPI device (this or any other) attaches there yet.
Esp32C3Simulator already had the GPIO_IN plumbing (setPinState -> gpioIn ->
GPIO_IN_REG read) but never opted into connectDigitalInputsToMcu, so a pin
wired to a switch/button was never fed the solved circuit voltage and
digitalRead() ignored the real wiring. Enabling the flag (as AVRSimulator and
RP2040Simulator already do) completes the issue #247 fix: the ESP32-C3 now
reads GPIO2 from the SPICE solve, so toggling the slide switch flips the LED.
BasicParts' button/slide-switch seed already yields to spiceDriven(), so there
is no double-drive.
The slide-switch SPICE model only wired pin 1 <-> pin 2 (an SPST), ignoring
pin 3. The part is really an SPDT whose common wiper (pin 2) selects pin 1 at
value=0 or pin 3 at value=1, so a switch wired GND-1 / signal-2 / VCC-3 (the
natural Wokwi hookup) could never pull its signal high. Fixes the reported
ESP32-C3 case (issue #247) where only the green LED lit and the switch never
toggled the red one.
Second cause on that board: the ESP32-C3-DevKitM-1 exposes its supply as
3V3.1/3V3.2 and 5V.1/5V.2 (there is no bare 3V3/5V pin). VCC_PIN_RE has no
numeric-suffix branch on purpose (a dual-supply pin such as L293D VCC2 must
not collapse onto the shared logic rail), so those numbered pins floated at
0 V and the switch's HIGH side was dead. List them in boardPinGroups for
esp32-c3 / esp32-s3 / esp32-cam.
- componentToSpice: SPDT emission (both throws, complementary 0.01/1e9 R).
- digitalGateEngine: both driveSwitch paths (all-digital + mixed) made SPDT to
match, so the pure-digital paint and the ngspice solve agree.
- examples-digital / examples-circuits: rewire every slide-switch so the rail
feeds pin 3 and pin 1 is the value=0 throw, preserving value=ON=HIGH.
- spice-slide-switch-spdt-repro test reproduces issue #247 at the netlist level.
The top bar packs three zones onto one row: the view-mode toggle, the editor
actions (Compile/Run/Stop/...), and the canvas controls (board selector,
Serial, Scope, zoom, Add) portaled in from SimulatorCanvas. The editor zone
was flex:1 min-width:0 while the canvas zone was fixed-width, so when the bar
narrowed - mainly when the right-docked AI chat opens - the editor zone shrank
below its own buttons and painted them over the board selector / Serial /
Scope. The existing collapse logic was keyed to the viewport (@media 768px),
so it never fired on a wide screen with the chat open.
Make the shared bar a container-query context and collapse every zone by the
bar's own width instead of the viewport: view-mode labels drop to icons first,
then Serial/Scope/Add labels and the board selector ellipsizes, then the
component count and finally the zoom buttons (wheel-zoom still works). Floor
the editor zone at its collapsed content width so it can never underflow and
overlap; past that the lower-priority canvas controls yield toward the right
edge instead. Verified across bar widths 660-1140px with the AI chat open:
overlap eliminated, dropdown menus still render un-clipped.
The file-tabs strip in the toolbar center duplicated affordances that
already exist elsewhere: the file it showed is selected in the left file
explorer, and its board-owner label duplicated the board selector combo.
It also ate horizontal space and crowded the action row on narrow panes.
Remove the FileTabs component entirely; the left explorer is now the single
place to switch files. The toolbar center slot stays as an empty flex
spacer so the right action group remains pinned to the far right.
In a multi-board project the wired boards are one system, so running just
the active board almost never matches intent (a cross-wired UART pair only
comes alive when both run). The primary Run button now runs ALL boards when
there is more than one, with a split caret-menu to still run only the active
board. Single-board and board-less behaviour is unchanged, and the separate
Run-All double-triangle button is kept only for board+chip / chips-only
projects where the primary Run is not already a run-all.
The esp32-blink-led example wired the external red LED straight from GPIO4
to the anode with no current-limiting resistor. Add a 220 Ohm resistor in
series (GPIO4 -> R -> LED anode -> GND) so the example models correct
practice and matches the other LED examples.
WebSocket-backed boards (ESP32, STM32, Raspberry Pi) reach the electrical
simulation only through PinManager.triggerPinChange, which updated the pin
state + notified listeners but never requested an electrical re-solve. AVR
and RP2040 already resolve at their own toggle sites. As a result an analog
part on an MCU-driven net (e.g. a resistor-less LED whose brightness comes
from the SPICE solve) stayed at its first solved value until unrelated
activity (such as serial output) forced a solve — so an ESP32 blink with no
Serial in loop() left the LED stuck on.
Request an electrical re-solve after an 'mcu'-sourced pin edge, in one place
(triggerPinChange), covering all WS boards. Gated to source==='mcu' so the
solver's own input feedback (triggerPinChange with the default 'external'
source) can't loop; requestElectricalResolve coalesces overlapping ticks so
a per-edge call is cheap.
After deleting the default board and adding a different one via the canvas
picker, the editor kept editing the removed board's (now deleted) file group
while compile read the NEW board's default group — so code typed into the
editor was silently dropped and the board ran its default sketch ("compiles
fine but runs the old code"). addBoard now points the editor at the new
board's group when it becomes active, and removeBoard re-points it at whatever
board is active afterwards. setActiveBoardId already did this; the canvas
picker calls addBoard directly. Adds a regression test.
Extend the spice-driven input path (already live for AVR/ESP32) to RP2040 and
STM32 so digitalRead() of an INPUT pin reflects the actual wiring: a pin tied
to a rail reads that rail, and an INPUT_PULLUP button-to-GND reads idle-HIGH /
pressed-LOW instead of floating or inverted.
RP2040 (rp2040js, frontend-only): the GPIO listener now splits input vs output
mode. Input pins report their pad pull (InputPullUp/Down) via setPinPull and
seed the pull's idle level (rp2040js does not auto-apply the pad pull to the
readable input register); the SPICE solve then overrides via connectDigital-
InputsToMcu when the net is actually sourced. Output pins drive as before.
spiceDrivenInputs = true.
STM32 (backend QEMU): the worker now forwards a new gpio_pull event (from the
libqemu-arm picsimlab_pull_pin callback) so the netlist stamps the matching
weak resistor; Stm32Bridge surfaces it, Stm32BridgeShim opts into
spiceDrivenInputs, and collectPinStates maps PA0/PC13 names to the linear pin
so the pull is read. STM32 outputs stay on the part layer (unchanged).
Event-driven parts with no SPICE model (rotary encoder, keypad) remain
protected by the existing sourcedNets gate in the connector.
Re-do the AVR spice-driven digital inputs (reverted in c11c195) the right way so
INPUT_PULLUP buttons keep working. PinManager.updatePort now detects the AVR
internal pull-up (input DDR bit + PORT bit high) and sets the pin pull, so the
netlist stamps the 45k pull-up and an INPUT_PULLUP input reads HIGH at idle.
connectDigitalInputsToMcu drives a pin from the solve only when its net is
source-backed by a RAIL or a COMPONENT card (button switch, divider, cross-board
output) — NOT by the internal pull alone — so INPUT_PULLUP pins wired to
event-driven parts with no SPICE model (rotary encoder, keypad) are left to the
part layer and never clobbered. AVR only; RP2040/STM32 stay on the part-seed
until their pulls are modeled.
The spiceDrivenInputs change (e81450e + f4401cc) fixed plain-INPUT-wired-to-rail
reads but BROKE the far more common INPUT_PULLUP + button-to-GND pattern: the
internal pull-up is not modeled in the netlist, so the input floated LOW and read
as permanently pressed (verified live on the stm32-bluepill-button example).
Revert all the spice-driven-input changes to the pre-fix part-seed behaviour,
which handles INPUT_PULLUP correctly. Proper fix (model the internal pull-up per
board so BOTH patterns work) is a follow-up. Keeps the Pi LED fix.
Extend the source-backed SPICE-driven input fix to the Pico (RP2040) and STM32:
a GP/PA pin wired to a rail or button now reads the right level from the solve,
while floating event-part nets (encoder/keypad/dialer/dip/stepper) stay on the
part layer. RP2040 just opts in (spiceDrivenInputs); STM32 opts in via the
Stm32BridgeShim and connectDigitalInputsToMcu maps PA0/PC13 names to the linear
pin setPinState expects (stm32PinNameToLinear).
An Arduino input wired to a power rail read the wrong level: a pin tied to 5V
read LOW, and a button-to-5V read idle-HIGH / pressed-LOW. AVR inputs were never
fed the solved circuit voltage (only the ESP32 had spiceDrivenInputs), so a
bare-rail input had no driver and buttons fell back to a hardcoded active-low
pull-up seed that ignored the wiring.
Enable spiceDrivenInputs on AVRSimulator, and gate connectDigitalInputsToMcu on
a new NetlistBuilder sourcedNets set (rails, GPIO V-sources, pulls, and any net
a component card touches). Only source-backed input pins are driven from the
solve; floating nets are left to the part layer, so event-driven parts with no
SPICE model (rotary encoder, keypad, dialer, dip-switch, stepper) keep driving
their own pins instead of being forced LOW.
/about had its own seoMeta but was never in the entry-server prerender map,
so it was served as the SPA shell (homepage title/canonical) — a soft-404
risk for a page that is in the sitemap. Add it to ROUTE_COMPONENTS so
prerender-seo.mjs emits dist/about/index.html with the real About content
(now featuring the Velxio 3.0 release card) and a self-referencing canonical.
ESP32 digitalRead now reflects the actual circuit instead of a part-level
seed, so a button behaves like hardware — including breaking when it's
mis-wired.
- connectDigitalInputsToMcu: after each SPICE solve, threshold every ESP32
input pin's net voltage (3.3 V LVCMOS, hysteresis) and push the level into
QEMU. Only pins the MCU isn't driving as outputs are injected.
- Esp32BridgeShim advertises spiceDrivenInputs; the pushbutton / 6mm-button /
slide-switch parts skip their direct setPinState seed for such boards and
only flip the component property (pressed/value), which re-solves the
circuit. The connector then decides the level from the real wiring.
- makePinPullHandler no longer seeds the pin; it only records the pull
(netlist resistor) + requests a re-solve, so the read stays circuit-driven.
- GROUND_PIN_RE now matches bare numbered grounds (GND2, GND3) — the ESP32
DevKit element labels its second pad 'GND2', which previously floated.
Net effect: a correctly-wired INPUT_PULLUP button idles HIGH and reads LOW
pressed; a button mis-wired with GND on the wrong terminal reads stuck-LOW,
matching real silicon. AVR / RP2040 keep the legacy part-seed path.
The Pi bridge onPinChange was a no-op, so guest GPIO writes never reached the
PinManager / SPICE solver and wired LEDs stayed dark even though user scripts
printed 'LED on'. Mirror the ESP32 branch: forward to pm.triggerPinChange so
GPIO drives the canvas. Interconnect still preserves and calls this before its
own cross-board routing.
makePinPullHandler drove the post-boot INPUT_PULLUP seed through
getBoardBridge(), which only indexes the Pi bridge map (bridgeMap) — for
an ESP32 it returned undefined and the sendPinEvent seed silently no-op'd,
so the digital input stayed LOW even though the pull config was read and
the SPICE net showed the pulled voltage. ESP32 bridges live in
esp32BridgeMap; use getEsp32Bridge().
Completes the internal-pull emulation for the common case (a button on an
RTC-capable GPIO like 4/15/25/... with INPUT_PULLUP):
- Backend reads the RTC_IO pad RUE/RDE bits via the new
get_internals(QEMU_INTERNAL_RTCIO) and emits gpio_pull for RTC pins, so
pull-up/down on those pads is finally visible (it lives in RTC_IO, not
IO_MUX). IO_MUX path still covers non-RTC pins.
- The digitalRead path is driven by seeding the GPIO input level, not by
SPICE. The part-level INPUT_PULLUP seed (BasicParts) is sent at attach,
before the multi-second QEMU boot finishes, so it is lost and the pin
reads LOW. makePinPullHandler now drives the pin to the pull's idle level
via sendPinEvent when the guest programs the pull (post-boot), so it
sticks. A real button press/release still overrides it.
INPUT_PULLUP / INPUT_PULLDOWN had no effect in simulation: the ESP32's
internal pull resistors live inside QEMU and were invisible to the SPICE
solver, so an input wired to a button-to-GND floated to 0 V and read LOW
even at idle. The canonical active-low button never worked.
Read the pull config straight out of the running guest: the IO_MUX
register (FUN_PU bit 8 / FUN_PD bit 7) is already exposed read-only via
qemu_picsimlab_get_internals(3), so no QEMU rebuild is needed. The worker
scans it on the 100 ms poll thread and emits gpio_pull; the bridge feeds
it to PinManager; the netlist stamps a weak 45k resistor to the rail so
idle inputs read the correct level. 45k matches the real internal pull
and is weak enough that any external driver/pull dominates.
Verified with ngspice: idle ~3.3 V (HIGH), pressed ~0 V (LOW).
The pushbutton was modelled as a switch between only 1.l and 2.l; the
other two legs (1.r, 2.r) connected to nothing. Wiring GND/GPIO to those
legs silently produced a dead button, and the failure was invisible.
Model it like hardware: 1.l is internally shorted to 1.r and 2.l to 2.r,
and pressing bridges terminal 1 to terminal 2. Wiring to any leg now
works, and putting GPIO and GND on the same terminal is a dead short,
exactly as on a real tactile switch. Back-compat A/B variant preserved.
- boot_images manifest: bump arm64 rootfs (gpiozero/colorzero baked in,
hostname applied at boot, reworded MOTD)
- RaspberryPi3Bridge: onBooted shell-ready detector + sendAndWaitForPrompt
flow control (resets on disconnect)
- RaspberryPiWorkspace: distinct Booting overlay + piBooted-driven status,
inline SVG icons replacing emoji glyphs
- SerialMonitor: strip CSI/DSR escapes so the dumb console no longer shows
a literal [6n next to the prompt
- VirtualFileSystem: upload auto-starts the Pi and waits for the shell, then
flow-controls each command (no more dropped lines on large files)
- i18n: bootingTitle/bootingNote + reworded offlineNote2 across 9 locales
Sweep all off-brand blues (#007acc logo-blue, #0e639c, #3b82f6) and the neon
cyan family (#4fc3f7, #00b8d4, #00e5ff, rgba 0,184,212 / 0,122,204) across the
editor, simulator, examples gallery and pages to var(--color-action-primary).
The Code/Both/Circuit toggle, board chips, library manager, modals etc. now
match the Libraries / +Add buttons. Also keep the editor Libraries label
visible in the default split (lower the container-query threshold).
Unify the editor toolbar and landing page on the single #0071e3 accent
(token --color-action-primary). Replace the fluorescent cyan/green outline
treatment (Libraries pill, overflow icons, compile/run/stop, feature tiles,
pricing/licensing badges, classroom banner) with solid fills following the
+Add button. Green/red kept solid and semantic-only (run/success, stop/error).
recordUpdateWire was used by the wire colour palette and the right-click menu but
never destructured from the store, so every colour-swatch click threw
'recordUpdateWire is not defined' and did nothing. tsc would have caught this, but
build:docker skips type-checking, and the only prior caller (the touch-only palette)
was never exercised. Bind it like the other record* actions. Together with the
applyNow fix this makes wire colour changes from the UI actually work.
recordUpdateWire pushed its command with { applyNow: false }, so it recorded the
change for undo but never executed it. Its only callers (the wire colour palette
and the new right-click menu) pass the new colour and expect it applied — neither
pre-applies via the raw updateWire mutator. Net result: changing a wire colour
from the UI did nothing (only the 0-9/c/l/m/p/y keyboard shortcut, which calls
updateWire directly, worked). Drop applyNow:false so it applies like every other
record* command (recordRemoveWire etc.). Adds an undo/redo regression test.
Changing a wire's color on desktop was keyboard-only (select wire + 0-9/c/l/m/p/y)
with no visible control — the floating color palette (SelectionActionBar) only
rendered on touch devices, so desktop users had no way to discover it. Now:
- the wire SelectionActionBar (top-center, with the color palette) also shows on
desktop when a wire is selected and the sim is stopped (it is pinned top-center
so it never covers pins); component/board bars stay touch-only.
- right-clicking a wire opens a context menu with the color swatches + delete.
Keyboard shortcuts still work. Mirrors the existing board context-menu pattern.
SSD1306Core only handled horizontal/vertical addressing (0x20/0x21/0x22) and
defaulted memMode to horizontal. Page-mode drivers (Tiny4kOLED on ATtiny85,
U8g2 page buffer, classic SSD1306 libs) position the cursor with the single-byte
commands 0xB0-0xB7 (page) and 0x00-0x0F / 0x10-0x1F (column nibbles) and rely on
the SSD1306 power-on default of PAGE addressing — they never send 0x20. velxio
ignored those cursor commands and advanced in horizontal mode, so every setCursor
was a no-op and the hatching/border/text piled onto wrong rows -> garbled display.
Fix: default memMode=2 (datasheet power-on) and handle the page/column-set
commands. Adafruit_SSD1306 still works (it sends 0x20,0x00 + 0x21/0x22 explicitly).
Verified: decoded the real ATTinyCore Tiny4kOLED I2C stream renders a clean
border + '128x64'. Adds a page-addressing render test.
The ATtiny85 has no hardware TWI; TinyWireM/Tiny4kOLED drive I2C through the USI
peripheral (SDA=PB0, SCL=PB2). avr8js ships AVRUSI but velxio never instantiated
it, so the I2C bus had no master on the ATtiny85 and devices (e.g. SSD1306 OLED)
got no data — the display stayed blank (and wokwi-ssd1306 threw putImageData with
an empty framebuffer). New UsiI2cBridge instantiates AVRUSI and sniffs the SDA/SCL
lines, replaying START/STOP + 8-bit bytes onto the shared I2C bus as
start/connectToSlave/writeByte/stop (the same calls AVRTWI makes for the Uno).
Validated against real ATTinyCore Tiny4kOLED firmware: decodes addr 0x3C + SSD1306
init/data stream. Firmware tolerates NACK so the sniffer is passive.
arduinoPinToName() had no ATtiny85 case, so pin 1 reverse-mapped to "1"
instead of "PB1" (the wire/netlist name). The MCU-edge listener was never
attached (name not in pinsInCircuit) and the SPICE V-source was never altered
on digitalWrite, so a blink LED's branch current stayed at its HIGH value —
the LED latched ON and never turned off (and analogWrite duty changes never
re-solved). Map attiny85 pin N -> "PBN", mirroring pinNameToArduinoPin.
AVRSimulator used wrong ATtiny85 Timer0 data-space addresses: OCR0A 0x56
(=PINB), OCR0B 0x5c (=EECR), TCCR0A 0x4f (=TCNT1). analogWrite() writes
OCR0B at data 0x48, so pollPwmRegisters() read the wrong register and PWM
duty was never seen — attiny85-pwm-fade showed no fade. Corrected both
PWM_PINS_TINY85 and attiny85Timer0Config to TCCR0A=0x4A/OCR0A=0x49/OCR0B=0x48
(verified against the ATTinyCore analogWrite disassembly). delay()/millis
(overflow-based) was unaffected. Tests updated off the old 0x5c/0x56.
The live solver only re-solved on component/wire/board changes, so a runtime
burnout (which changes burntComponents, not components) wouldn't rebuild the
netlist — the burnt part stayed in the circuit until something else changed.
Trigger a re-solve on burntComponents change too. The monitor skips already-
burnt parts, so this converges (one extra solve).
- The live solver now excludes runtime-destroyed components from the netlist,
so a burnt part actually goes OPEN: its current stops and anything it fed
loses power (cascading failure), the way real hardware behaves once a part
burns out. Filter is in CircuitSimulationService.runSolve (no-op when nothing
is burnt).
- The LED's burnout now also marks it in the shared burntComponents set, so a
burnt LED gets the same charred + smoke-badge visual (and is opened in the
solve) as a resistor / capacitor, on top of going dark.
Generalizes the LED's burnout to passive parts via a centralized monitor that
watches the live electrical solve. When a part is stressed past its rating for
a sustained moment it's marked "destroyed": the canvas renders it charred with a
smoke badge and a fault is logged to the output console. Clears on Reset.
Follows the Fritzing-simulator precedent (smoke-on-component) wrapped in a
first-order thermal delay so a brief inrush spike doesn't destroy a part — only
sustained overload (or a catastrophic >=3x overload, instant) does.
- runtimeBurnout.ts: pure stress (resistor power, cap voltage / reverse) + a
thermal-delay burn decision, plus a monitor subscribed to the electrical +
simulator stores. Resistor burns past 2x rated (the verifier already warns at
1x for intentional teaching over-power); a cap bursts over its voltage rating
or on reverse polarity.
- useSimulatorStore: burntComponents set + mark/clear actions; cleared on
Reset / restartParts.
- DynamicComponent + SimulatorCanvas.css: charred filter + smoke badge.
Tests: thermal-delay decision (instant / sustained / spike / cooldown) + stress
computation (resistor power, cap over-voltage, reverse, unwired -> null).
- Power short (blocking error): a wire joining a VCC-type pin directly to a
GND-type pin shorts the supply to ground. The current-based short-circuit
rule only inspects battery/signal-generator/power-supply sources, so it
misses a board-rail-to-GND short with no such source -> name it structurally.
- Shorted-out part (warning): a 2-terminal part with both terminals on the same
node has no effect on the circuit.
Both graph-based, run before the solve. Zero false positives across the 69
gallery examples; gallery pre-flight tests still pass (no spurious blocking).
First slice of the connection ("malas conexiones") checks, graph-based and run
before the solve so they report even on circuits too incomplete to solve:
- Missing power: a rated peripheral (sensor/display) wired into the circuit but
missing its VCC or GND connection -> warning. Boards are excluded (they live
in input.boards and self-power).
- Dangling 2-terminal part: a resistor / LED / capacitor / diode / inductor
connected on only one side (the other terminal floating) -> warning.
Both non-blocking. Verified zero false positives across all 69 gallery
examples. Tests: dangling resistor warns, fully-wired doesn't, module missing
GND warns.
Extends the over-voltage rule to the two cases the previous slice deferred:
- Boards (ESP32 / Pico / Arduino / ...): a board's supply pins all collapse to
the self-driven vcc_rail net, so an external source on them makes the .op
singular rather than readable. Added a graph-based check (runs before the
solve): if a power source is wired to a board supply pin and its nominal
voltage exceeds that pin's rating, warn. Threaded boardKind into
BoardForSpice so the verifier can look up the board rating.
- Electrolytic capacitors: new `voltage` rating property (select, default 25V,
on capacitor-electrolytic + cap-elec-* presets, via component-overrides +
regenerated metadata). The verifier reads the DC voltage across the +/- pins
and warns on over-voltage (vent/burst) and on reverse polarity (a polarized
cap wired backwards). Defaults to 25V when the property is unset.
Tests: 9V battery -> ESP32 VIN warns, 1.5V doesn't; 24V across a 16V cap warns,
5V across a 25V cap doesn't; reverse-biased cap warns. All real-ngspice.
handleCompile() wiped all logs at the start, including the 'Circuit check'
group the pre-flight verifier had just logged (e.g. an over-voltage warning).
A Run auto-compiles right after verification, so the warning vanished. Preserve
circuit-check entries on compile, same as the boardless path already did.
Adds a non-blocking circuit-verifier rule: a component whose supply pin sees
more than its datasheet absolute-maximum voltage warns ("X V on the VIN pin --
above its Y V maximum; not emulated accurately"). This is the "fed too much
voltage" mistake the operator asked for (a 3.3-5V module wired to a 9V battery).
- New componentRatings.ts: per-PIN abs-max table (SSD1306/ILI9341 displays,
DHT/BMP280/HC-SR04/MPU6050 sensors, NeoPixel, servo). Per-pin thresholds so a
3V3 pin (3.6V) and a VIN pin (6V) are judged separately. Unknown parts are
simply not checked; an unwired or floating supply pin is skipped.
- circuitVerifier reads each rated part's supply-vs-ground voltage from the
solved nets (via pinNetMap) and warns when it exceeds the rating.
- VCC/VDD/3V3/5V pins ride the shared vcc_rail net (NetlistBuilder convention);
VIN is a normal net. Both handled.
- Tests: 9V on a module VIN warns; 5V on VIN does not; a 3.3V pin on a 5V rail
warns.
Boards (esp32/pico/arduino) carry ratings in the table but aren't checked yet
-- BoardForSpice doesn't thread its boardKind; follow-up.
Clicking Run runs a pre-flight circuit-verification SPICE solve before
compiling. On a cold ngspice worker that solve takes a second or two, but the
Run button kept showing the play icon and stayed enabled, so it looked dead
and got clicked repeatedly -- each click stacking another verification (the
reported 6x [handleRun] click).
- Add a `verifying` state: the Run button now shows the same spinner as the
Compile button and is disabled while the pre-flight solve runs.
- Synchronous re-entrancy guard (runInFlightRef) ignores re-clicks while a
verification is already in flight.
The runtime burnout / pre-flight messages used an inline `setMessage` toast
that rendered as a bar near the Run/Stop buttons and overlapped them. Route
all circuit findings into the compile output console instead — one unified,
red/orange diagnostics log next to the compiler output (Proteus-style):
- New "Circuit check" console group (CIRCUIT_CHECK_TARGET). checkOrBlock logs
every error (red) / warning (orange) there and opens the console; the
blocking modal is kept for the explicit Run-anyway / Cancel decision.
- Runtime `velxio-circuit-fault` events (LED burnout) log to the same group
instead of the toast; no auto-open (the continuous solver can fault on load).
- Warnings-only no longer pop a toast — the console entry is the record.
- The run-path clears preserve circuit-check entries so findings survive a
"Run anyway" auto-compile.
The Run (and Run All) buttons were wired `onClick={handleRun}`, so React
passed the click event as the first argument. handleRun(skipVerify=false)
then treated the truthy event as skipVerify=true and skipped checkOrBlock
entirely -- the pre-flight circuit verifier never ran on a button click.
This is the real reason a 9V battery wired straight to an LED ran with no
warning even though the verifier exists and is correct (project 2840fd12).
- onClick={() => handleRun()} and onClick={() => handleRunAll()} so
skipVerify stays at its false default.
- Give handleRunAll the same checkOrBlock pre-flight gate handleRun has.
Verification failing silently in production is otherwise hard to spot — the
rules read 0 A when branch currents are missing. Log the errors/warnings,
whether a solve landed, and which branch/node vectors came back.
The pre-flight circuit verifier reads branch currents via runNetlist ->
readAllCurrentVectors() (ngSpice_AllVecs enumeration). The production
Web-Worker ngspice WASM build does not surface voltage-source #branch
vectors through that enumeration for an .op plot, so branchCurrents came
back empty and every current rule (short-circuit, LED over-current) read
?? 0 -> no fault. The live solver avoided this by requesting each current
explicitly by name; the Node test build enumerates them, so the gap was
invisible to the suite. Net effect: a 9V battery wired straight to an LED
ran with no warning (reported on project 2840fd12).
- runNetlist: request every V_* source branch current explicitly by name
and merge with the enumeration, so source/LED currents are always present
regardless of the worker WASM's AllVecs behaviour.
- circuitVerifier: non-finite source/LED current -> blocking unstable-solve
fault ("could not solve a stable current - likely a short or a part with
no current limit, e.g. an LED with no series resistor").
- LED runtime (BasicParts): burn out on a non-finite current instead of
falling through to the digital fallback and glowing; raise burnout
threshold 20mA -> 100mA so high-power/RGB channels are not falsely
destroyed; clear the burnt latch on Reset (resetBoard bumps hexEpoch).
Tests: real-data repro, mocked non-finite verifier test, runtime
non-finite / high-power / latch-recovery tests.
All three bugs are rotated components whose pin geometry is computed in a
path that ignores the rotation, so pins/wire-starts land tens of pixels off
the visual pin tips. The live rotate action already recalculates correctly;
these are the paths that didn't.
#231 (context-menu 'Tap a pin to wire'): both onPinSelect handlers in
SimulatorCanvas computed the wire start as getBoundingClientRect().left +
pin.x — adding the UNROTATED pin offset to the ROTATED bounding-box corner.
On a 90-deg HC-SR04 that put the start ~70-100px off (measured). Replaced
with calculatePinPosition(id, x+6, y+6, rotation), the same rotation-aware
helper wires and the pin overlay use.
#232 (rotate -> delete -> undo): recordRemoveComponent's undo restored the
component + wires but never recalculated wire endpoints, so a rotated part's
wires kept the unrotated coords captured at delete time. Added a
requestAnimationFrame updateWirePositions(id) after restore.
#230 + #232 (pin boxes wrong after import / undo / load, 'fixes if rotated
again'): PinOverlay captured the wrapper's layout box (the rotation pivot)
once at mount. On import/undo/load the component mounts already-rotated and
its wokwi-element may not be sized on the mount tick, baking a wrong pivot
that only refreshed when rotation changed. PinOverlay now re-measures after
layout (rAF) and whenever it is about to become visible (showPins dep).
AVRSimulator never instantiated avr8js's AVREEPROM peripheral, so any
EEPROM.read/write/update hung the sketch: the Arduino EEPROM library spins
on `while (EECR & (1<<EEPE))` waiting for the write-complete bit to clear,
and with no peripheral driving EECR that bit never cleared (issue #203 —
EEPROM.update(0,123) + EEPROM.read(0) hangs instead of printing 123).
Wire AVREEPROM to the CPU in both loadHex() and reset() via a new
attachEeprom() helper. The EEPROMMemoryBackend is created once per
simulator instance and reused across firmware reloads and resets, so a
value written in one run is still readable on the next boot — matching
real hardware, where re-flashing leaves EEPROM intact. Sizes per variant
(Uno 1024 B, Mega2560 4096 B, ATtiny85 512 B); ATtiny85 gets its own
register map (EECR 0x3C / EEDR 0x3D / EEARL 0x3E / EEARH 0x3F) since
avr8js's default eepromConfig targets the ATmega328P.
Adds eeprom.test.ts: drives the EEPROM register protocol against the
production AVRSimulator (loadHex + step), asserting a byte round-trips,
the EEPE poll terminates (no hang), and contents survive a reset.
The NTC breakout's SPICE topology was inverted relative to the example
sketch's decode formula (rNtc = R_PULL * v / (5 - v)), which assumes a 10k
pull-up from VCC to OUT and the NTC from OUT to GND. The mapper had the NTC
on top (VCC->OUT) and the pull-down on the bottom, so the recovered
temperature ran backwards: dragging the slider to 100C made the sketch
print -25C. Swap the two resistors so V_OUT = 5 * Rntc / (Rntc + Rpull),
matching the sketch and the hand-built reference netlist in
spice-avr-mixed.test.ts (T=0 -> ADC 789, T=25 -> 511, T=50 -> 270).
Also replace the SensorParts linear approximation (2.5 - (t-25)*0.02) with
the same beta-model divider so the non-SPICE ADC injection decodes back to
the slider value, and drop the dead onInput path that treated the element's
value as a raw ADC count.
Reset now restores interactive sensors (temperature/lux/gas sliders) to
their configured defaults: resetBoard re-dispatches each sensor's default
into the running sim and bumps sensorResetNonce so the open
SensorControlPanel remounts and the slider snaps back. Previously a restart
left the NTC frozen at the last dragged temperature.
Updated the examples netlist snapshot for the swapped NTC cards.
The star banner used a single localStorage flag (velxio_star_prompted)
set identically whether the user clicked through to the repo or just
closed it, so once dismissed it never showed again and clickers and
closers were indistinguishable.
Now track three flags:
velxio_star_prompted - dismissed the first ask
velxio_star_prompted_v2 - dismissed the follow-up (stop forever)
velxio_star_clicked - clicked through to the repo (stop forever)
Anyone who dismissed the first ask without clicking through gets ONE
follow-up (round 2) with a stronger message; clicking the repo link at
any time opts them out permanently. Capped at two asks total.
Adds starBanner.title2/body2 copy in all 9 locales.
Commit 9360f95 deleted lib/proWifiGate.ts but left useSimulatorStore importing
it (the store edits weren't staged), so a clean checkout of master failed to
build (import of a deleted module). velxio.dev was unaffected — deploy.sh builds
from the working tree, which had the removal applied. Commit the removal so HEAD
is consistent.
The proWifiGate seam blocked a free user from running ANY Pico W WiFi sketch.
The product model changed: LOCAL WiFi (the chip associating to the simulator's
virtual AP) is now FREE — only REAL internet (the backend bridge) and the IoT
gateway are paid, gated inside the pro overlay's Cyw43PioPeripheral / backend.
So a free user must be allowed to run WiFi sketches. Remove the gate seam and
its two store call sites. The board-kind firmware variant + the run-time
peripheral re-attach (which fixed the plain-firmware import-network crash) stay.
Two robustness fixes for the paid-WiFi open-core split:
1. A pi-pico-w board now boots the RPI_PICO_W firmware variant (which has the
`network` module) based on its BOARD KIND, not on whether the WiFi
peripheral happens to be attached. Previously the variant was
`pioPeripheral ? 'pico-w' : 'pico'`, so any moment the peripheral was
absent (see #2) booted the plain Pico firmware and a Pico W sketch crashed
with "ImportError: no module named 'network'". Store boardKind in
attachPioPeripheral and pick the variant from it. (OSS: 'pico-w' isn't
registered, so firmwareConfig falls back to 'pico' — a self-hosted Pico W
has no WiFi engine anyway.)
2. Re-attach the PIO peripheral in loadMicroPythonProgram before loading
firmware. An example deep-link adds the board during render, which races the
pro overlay's async mountPro that installs the CYW43 factory — so the
board-add attach returned null and a PAID user's Pico W booted plain
firmware too. attachPioPeripheral is idempotent; by run time the factory is
installed, so a paid user gets the W peripheral and real WiFi.
Pico W WiFi is a paid overlay feature. A free/web user running a Pico W sketch
that uses WiFi had no peripheral attached -> the simulator picked the plain Pico
firmware (no `network` module) -> the run crashed on `import network` with a
raw Python traceback (on a public example page, no less).
Add lib/proWifiGate.ts (mirrors proBoardGate): a stable doorbell the overlay
fills in. useSimulatorStore gates both loadMicroPythonProgram (before loading
firmware) and startBoard (run backstop for example/loaded boards): if the gate
blocks, fire the upgrade prompt and skip the run. Non-WiFi Pico W sketches still
run for free. No-op in OSS (default 'allow' -> a Pico W runs as a plain Pico).
The Pico W WiFi showcase examples are a paid-overlay feature now (the WiFi
engine moved to the overlay). Read them through a build-time `@pro` seam so the
SSR prerender + gallery + sitemap include them when built with the overlay, and
OSS gets an empty stub.
- data/examples.ts: import { proExamples } from '@pro/data/proExamples' (static,
build-time) instead of the local examples-picow-wifi.ts; delete that file.
- src/__pro_stub__/data/proExamples.ts: OSS no-op (empty list) for the @pro alias.
- vitest.config.ts: mirror the @pro alias (stub by default / overlay when
VITE_PRO_BUILD) so tests loading examples.ts resolve it.
- scripts/generate-sitemap.mjs: also parse <PRO_OVERLAY_PATH>/data/proExamples.ts
when building with the overlay (the script reads example IDs from source text,
so it can't follow the alias).
- Tests: drop the picow-wifi import/usage from the 5 OSS example tests (they
validate the OSS set now); prune the 4 obsolete picow netlist snapshots. The
overlay's proExamples get their own coverage in pro/.../__tests__/.
The stored snapshot predated the relay-LED netlist emission (current-sense
V-source + LED diode model), so examples-netlist-snapshot failed on a clean
checkout regardless of any source change. Regenerate it to match the current
NetlistBuilder output. Unblocks the deploy test gate.
Move the CYW43439 (Pico W) WiFi emulation out of the open-source tree so it
can ship as a paid feature in a private overlay. OSS keeps a plain Pico W
(no WiFi); the overlay registers the cyw43 protocol + backend network stack
at runtime via generic seams.
Frontend:
- Add simulation/PioPeripheral.ts: a generic "PIO bus peripheral" seam
(feedWord / inDiscardableWriteData / resetFraming / hostWakeLevel /
onHostWake / onSimulationStart). No factory is installed in OSS, so
createPioPeripheral() returns null and a Pico W simulates as a plain Pico.
- RP2040Simulator: keep the fragile PIO-FIFO plumbing (it must re-run after
loadMicroPython swaps the chip) but drive it through PioPeripheral instead
of an inlined cyw43 import (attachCyw43 -> attachPioPeripheral, etc.).
- useSimulatorStore: generic attach/detach + setBoardWifiStatus; drop the
cyw43 bridge map.
- MicroPythonLoader: add registerFirmwareVariant() so an overlay can add the
RPI_PICO_W build; remove the OSS pico-w config + bundled .uf2.
- Delete simulation/cyw43/ (moved to the overlay).
Backend:
- core/hooks.py: add generic register_ws_sim_handler / dispatch_ws_sim_message
and register_gateway_proxy / dispatch_gateway_proxy seams.
- simulation.py: route start_picow / stop_picow / picow_packet_out through the
ws_sim_handler hook (the overlay handles + gates them).
- iot_gateway.py: resolve the Pico W gateway through the gateway_proxy hook.
- Delete services/picow_net/ + picow_net_bridge.py (moved to the overlay).
Tests: move the cyw43/picow suites to the overlay; update RP2040Simulator
mock stubs to attachPioPeripheral.
David Montero Crespo