Galaksija stores ASCII codes in its 0x2800 video RAM (verified by snooping
the boot: it writes "@'READY" + ">_" prompt). The original CHRGEN ROM uses
a hardware-specific addressing that does not map char-code*8 to a glyph, so
rendering through it produced garbled output. Render the ASCII codes with
the public-domain IBM/VGA 8x8 font (font8x8 by Daniel Hepper / Marcel
Sondaar) instead -- legible green-on-black phosphor text. The boot screen
now reads "@'READY" with the ">_" input prompt, exactly like a real
Galaksija. Tests updated to check the bright-green channel.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
galaksija-display.c: a 32x16 text video chip that renders the Galaksija
video RAM. It is a passive bus snoop -- watches WR + address + data, and on
a write into the 0x2800 video region stores the character and renders that
cell into a 256x128 framebuffer using the public-domain CHRGEN font (code*8,
bit 0 = lit). It never drives the bus. The host blits the framebuffer to the
chip canvas (vx_framebuffer_init / vx_buffer_write).
Two tests:
- chipbus-galaksija-display: snoop+render smoke test (a write of 'R' to
0x2802 lights its cell; unwritten cells stay blank).
- chipbus-galaksija-computer: the COMPLETE machine over the chip-to-chip bus
(Z80 + galaksija-rom + ram-64k + inverter decode + galaksija-display) boots
the public-domain ROM and renders the monitor's "READY" prompt on screen.
40 chipbus tests across 10 files pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The public-domain Galaksija ROM (Voja Antonic; ROM A monitor + integer
BASIC, ROM B float BASIC, 8 KB) runs on a standalone Z80 + external ROM +
RAM + an inverter for address decode, all chip-to-chip over the shared bus,
no board:
ROM 0x0000-0x1FFF rom.CE = A13
RAM 0x2000-0x3FFF ram.CE = NOT A13 (the inverter chip)
RD -> both OE ; WR -> RAM WE
Pin-level boot proof (mirrors test_intel/test_z80/galaksija.test.js): watch
M1, read the address bus on each opcode fetch, and confirm the Z80 leaves
the reset vector (DI; SUB A; JP 0x03DA), reaches the init routine at 0x03DA,
and runs 1000+ fetches across 50+ distinct ROM addresses -- the real
firmware executing end-to-end through the settle-kernel bus. The on-screen
"READY" prompt is the next milestone (needs the video display chip
rendering the 0x2800 video RAM).
galaksija-rom.c embeds the public-domain ROM A+B image. 38 chipbus tests
across 8 files pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The architectural heart of the retro computer, proven on real chips. A Z80,
a 32K ROM, a 64K RAM and an inverter (address-decode glue) are wired
chip-to-chip over a shared address + data bus, no board:
ROM at 0x0000-0x7FFF rom.CE = A15
RAM at 0x8000-0xFFFF ram.CE = NOT A15 (the inverter chip)
RD -> both OE ; WR -> RAM WE
The ROM program writes 0x5A to RAM at 0x8000, clears A, reads it back, and
HALTs only if the byte survived. HALT going low proves the full core works:
the Z80 runs from ROM, the inverter decodes A15 to select RAM (the settle
kernel drives the combinational glue across hops), and the RAM latches a
write and returns it on a read over the shared tri-state bus, all within
synchronous bus cycles. Adds z80-ram-rom.c (boot image) + ram-64k/inverter
fixtures. 37 chipbus tests across 7 files pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
End-to-end validation of Phases 0-2 on an actual CPU. The real Z80
(examples/intel/z80.c) and a 32K EPROM (z80-boot-rom.c, a rom-32k variant
holding JP 0x0006 / HALT) are wired chip-to-chip over a shared address +
data bus with no board. RD drives the ROM's OE; CE is left enabled.
Booting exercises all three phases at once: the Z80 drives the address ->
the ROM reacts on the shared net key (Phase 0); asserts RD -> the ROM
tri-state-drives the data bus while the Z80 released it (Phase 1); and reads
the data bus in the SAME tickTimers step, getting the settled byte
(Phase 2 settle-before-read). The Z80 fetches C3,06,00, jumps to 0x0006,
fetches 76, and HALTs -> drives HALT low, which the test observes.
z80.wasm is compiled from the committed examples/intel/z80.c; the boot ROM
source + chip.json live in test_custom_chips/sdk/examples. All 36 chipbus
tests pass.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
End-to-end proof of the chip-to-chip net-key fix through the real
ChipRuntime + PinManager (not a unit stub). Two chips compiled from C
with wasi-sdk:
- bus-driver.c: drives 0xA5 onto D0..D7 at setup.
- bus-reader.c: polls D0..D7 on a 1ms timer, mirrors onto OUT0..OUT7.
Wired chip-to-chip with no board; with the chipbus flag both chips' Dn
pins resolve to one shared net key, so the reader reproduces 0xA5.
- sdk/examples/bus-{driver,reader}.{c,chip.json}: the proof chips.
- __tests__/fixtures/chipbus/*.wasm: committed fixtures (regenerate with
the test_intel/scripts/compile-chip.sh flags).
- __tests__/chipbus-twochip-integration.test.ts: loads the fixtures via a
relative path; skipIf they are absent.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
- Implemented `esp32_spi_chip_demo.ino` to demonstrate SPI communication with a 74HC595 shift register.
- Created `esp32_uart_chip_demo.ino` for UART loopback testing with ROT13 transformation.
- Added Python tests for compiling chips and sketches, ensuring valid WASM output and successful compilation for various board families.
- Developed end-to-end tests for ESP32 with custom chips using I2C and SPI, validating synchronous communication through the backend.
- Introduced GPIO bridge tests to verify serial communication and GPIO state changes.
- Ensured all tests validate the expected behavior of the custom chips and their interaction with the ESP32 firmware.
David Montero Crespo