- Implemented Bmp280Element as a custom web component for the BMP280 barometric sensor, including SVG representation and pin configuration.
- Created CircuitPreview component to render circuit thumbnails using SVGs of components, including support for various boards and components.
- Added a script to generate SVG files from wokwi-elements, ensuring proper formatting and structure for reliable rendering.
- Introduced a test HTML generation script to visualize component SVGs.
refactor: Update wiring examples for E32 OLED integration; correct pin mappings for VCC, GND, DATA, and CLK
test: Improve unit tests for ESPIDFCompiler; add scenarios for library resolution and CMake patching
chore: Mark subproject commits as dirty for wokwi-libs
Two bugs causing "can't save project" reports:
1. SaveProjectModal: validate currentProject.id is a real UUID before
calling updateProject. If id is "none" or any non-UUID string, fall
through to createProject instead, avoiding PUT /api/projects/none.
2. ProjectByIdPage: call clearCurrentProject() when the project fetch
fails (404/403/error). Prevents stale project IDs from a previous
session polluting the store and triggering spurious update calls.
Two bugs fixed:
1. SaveProjectModal was reading from the legacy global `files` array instead
of the active board's file group, causing projects to be saved with the
wrong board_type (e.g. 'arduino-uno' for ESP32 projects).
Now reads from fileGroups[activeBoard.activeFileGroupId] and uses
activeBoard.boardKind for board_type.
2. Error handling was always showing "Save failed." — now shows:
- "Server unreachable. Check your connection and try again." for network errors
- "Not authenticated. Please log in and try again." for 401 responses
- The server's detail message (with status code) for other errors
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Frontend WiFi detection via file-content scanning was unreliable because
fileGroups[board.activeFileGroupId] could be an empty array (not null),
bypassing the ?? fallback to editorState.files.
Fix: the ESP-IDF compiler now returns has_wifi:bool in its compile response.
The frontend stores this on the BoardInstance and uses it in startBoard()
instead of scanning file contents. The file-content scan is kept as a
fallback for boards that haven't been compiled in this session.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- handleRun now auto-compiles for ESP32/QEMU boards when no firmware is
available (same behavior as AVR/RP2040 boards)
- startBoard now reloads compiledProgram into the bridge if _pendingFirmware
was lost (e.g. after a page refresh between compile and run)
- Adds Esp32Bridge.hasFirmware() helper used by the store check
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace arduino-cli with ESP-IDF 4.4.7 for ESP32 compilation — Arduino-compiled
firmware crashes in QEMU (9-28 reboots) while ESP-IDF boots cleanly (0 reboots).
The new espidf_compiler translates Arduino WiFi/WebServer sketches to native
ESP-IDF C code, compiles with cmake+ninja, and merges into 4MB flash images.
Key changes:
- ESP-IDF compiler: translates WiFi.begin/WebServer to esp_wifi/esp_http_server
- ESP-IDF project template with QEMU-optimized sdkconfig (DIO, 40MHz, no WDT)
- WiFi status parser for ESP-IDF serial logs (wifi_status, ble_status events)
- IoT Gateway HTTP reverse proxy for ESP32 web servers
- WiFi/BLE auto-detection from sketch content + visual status icons
- Static IP 192.168.4.15 matching slirp DHCP first-client range
- Docker: new espidf-builder stage with ESP-IDF 4.4.7 toolchain
- 157 tests covering WiFi/BLE for both ESP32 (Xtensa) and ESP32-C3 (RISC-V)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Implemented ExampleLoaderPage to load examples by ID from the URL.
- Added ExampleLoaderPage route to App component.
- Created ShareModal for sharing project links with visibility toggle.
- Updated UserProfilePage to include share button for user projects.
- Enhanced ExamplesGallery with a copy link button for examples.
- Introduced utility function loadExample to streamline example loading and library installation.
- Updated project visibility management in useProjectStore.
- Added styles for new components and buttons.
- Updated .gitignore to include Arduino compilation byproducts.
Extends MicroPython support (Phase 2) to ESP32 Xtensa boards running on
QEMU. Firmware is downloaded from micropython.org, cached in IndexedDB,
and loaded into QEMU. User code is injected via the raw-paste REPL
protocol after the MicroPython REPL boots.
- Create Esp32MicroPythonLoader.ts for firmware download/cache
- Add raw-paste REPL injection (Ctrl+A → Ctrl+E → code → Ctrl+D) to Esp32Bridge
- Extend loadMicroPythonProgram in store for ESP32 path
- Add ESP32 default MicroPython content (GPIO 2 blink)
- Simplify SerialMonitor Ctrl+C/D to work for all MicroPython boards
- Bundle fallback firmware for ESP32 and ESP32-S3
- Add all ESP32 board variants to SerialMonitor tab maps
Closes#3 (Phase 2)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Implements MicroPython emulation for Raspberry Pi Pico boards running
entirely in the browser using rp2040js. Users can toggle between
Arduino C++ and MicroPython modes via a language selector dropdown.
Key changes:
- Add LanguageMode type and BOARD_SUPPORTS_MICROPYTHON to board types
- Create MicroPythonLoader.ts: UF2 firmware parser, LittleFS filesystem
builder (via littlefs-wasm), IndexedDB firmware caching
- Extend RP2040Simulator with loadMicroPython() method using USBCDC for
serial REPL instead of UART
- Add setBoardLanguageMode and loadMicroPythonProgram store actions
- Update EditorToolbar with language toggle and MicroPython compile flow
- Enhance SerialMonitor with REPL label, Ctrl+C/D support
- Bundle MicroPython v1.20.0 UF2 firmware as fallback in public/firmware/
- Update useEditorStore to create main.py default for MicroPython mode
Closes#3
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#14
- Right-click context menu on boards with "Remove board" option
- Delete/Backspace key removes the active board (when no component selected)
- Confirmation dialog before removal showing connected wire count
- Removing a board also removes all connected wires and cleans up
file groups, simulators, bridges, and VFS
- Cannot remove the last remaining board (button disabled + guard)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#81
- Add `codeChangedSinceLastCompile` dirty flag to useEditorStore
- Play button now triggers compilation automatically when no compiled
program exists or code has changed since last compile
- Show compilation progress during auto-compile before run
- If compilation fails, show errors instead of running stale code
- Keep separate Compile button for manual compile-only workflow
- Play button always enabled (disabled only while running/compiling)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Added tracking for simulation events: start, stop, and reset.
- Implemented tracking for library manager interactions, including library installations.
- Enhanced project management tracking with save and create project events.
- Integrated tracking for user authentication events: sign-up and login.
- Added tracking for CTA clicks on landing and SEO pages.
- Updated analytics utility functions to support new tracking events.
- Improved GitHub and Discord link tracking in the app header.
- Refactored existing components to utilize new tracking functions for better user engagement insights.
- Implemented SensorControlPanel component to allow real-time adjustments of sensor values during simulation.
- Introduced SensorUpdateRegistry for communication between UI and simulation.
- Added configuration for various sensors including sliders and buttons for user interaction.
- Enhanced existing sensor parts to support updates from SensorControlPanel.
- Created CSS styles for the SensorControlPanel layout and controls.
- Added `onPinStateChange` method to `ChipParts` for handling pin state changes in 7-segment displays.
- Updated `useOscilloscopeStore` to allow independent monitoring of multiple boards by adding `boardId` to channels and modifying `addChannel` method.
- Modified `getOscilloscopeCallback` in `useSimulatorStore` to filter channels based on `boardId` and pin number.
- Adjusted component and board position calculations in `useSimulatorStore` to account for wrapper offsets.
- Updated submodule references for `qemu-lcgamboa`, `rp2040js`, and `wokwi-elements` to indicate dirty states.
David Montero Crespo