Adds 44 SPICE mappers, 58 custom metadata entries, and 12 visual
Web Components covering logic gates, transistors, op-amps, regulators,
sources, electromechanical parts and integrated-circuit packaging.
Fase 9 — component catalog expansion
------------------------------------
- 7 logic gates (AND/OR/NAND/NOR/XOR/XNOR + NOT) as SPICE B-sources
- 8 multi-input gates (AND/OR/NAND/NOR with 3 and 4 inputs)
- 9 transistors: 5 BJTs (incl. PNP 2N3906/BC557) + 4 MOSFETs (incl.
P-channel IRF9540/FQP27P06). NMOS refactored from Level=3 W=0.1
(hangs ngspice) to Level=1 with sane W/L
- 5 op-amps: LM358, LM741, TL072, LM324 with per-chip saturation
rails + opamp-ideal
- 4 linear regulators (7805, 7812, 7905, LM317) with dropout
- 3 batteries (9V, AA, coin-cell) with realistic ESR
- Signal generator (sine / square / DC)
- 2 Schottky diodes (1N5817, 1N5819) + photodiode (lux-driven
current source)
Fase 10 — electromechanical + ICs
---------------------------------
- Relay (SPDT): coil + L + S-switch with native hysteresis +
flyback diode, inverted-control trick for the NC contact
- Optocouplers 4N25 and PC817 (LED + CCCS with CTR=0.5 / 1.0)
- 7 74HC ICs as DIP-14 packages emitting 4 or 6 B-sources per
component (first mapper pattern emitting multiple device cards)
- 3 flip-flops (D, T, JK) — digital-sim only (edge detection is
not representable in ngspice .op)
- L293D dual H-bridge motor driver
Infrastructure
--------------
- scripts/component-overrides.json gains a _customComponents[] array
that lets new Velxio-only parts survive metadata regeneration
(previously applyOverrides() could only patch wokwi-elements
components that had already been scanned)
- scripts/generate-component-metadata.ts injects custom entries
before the patch loop
- New ComponentCategory values: 'logic', 'analog', 'electromech'
- frontend/src/components/DynamicComponent.tsx PASSIVE tracing
extended from just ['resistor','resistor-us'] to 9 two-terminal
passives with per-part pin name maps
- New CI workflow test-circuit.yml runs the sandbox on push/PR
- frontend-tests.yml regenerates metadata and fails if committed
JSON is stale
- Documented 2 new ngspice gotchas in circuit-emulation-gotchas.md:
unicode in netlist titles silently hangs the parser, and
MOSFET Level=3 + W=0.1m causes .op to hang
- 164/164 sandbox tests passing in ~9 s (was 88 pre-fase-9)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Implemented Bmp280Element as a custom web component for the BMP280 barometric sensor, including SVG representation and pin configuration.
- Created CircuitPreview component to render circuit thumbnails using SVGs of components, including support for various boards and components.
- Added a script to generate SVG files from wokwi-elements, ensuring proper formatting and structure for reliable rendering.
- Introduced a test HTML generation script to visualize component SVGs.
- Introduced I2C_SENSOR_MAP for pre-registering I2C sensors in the simulator store.
- Implemented I2C slave state machines for MPU6050, BMP280, DS1307, and DS3231 sensors in esp32_i2c_slaves.py.
- Added unit tests for I2C slave functionality covering BMP280, DS1307, DS3231, and I2CWriteSink.
- Updated the simulator store to handle I2C address resolution and sensor data management.
- Marked submodules as dirty in wokwi-libs for rp2040js and wokwi-elements.
Docker multi-arch:
- Dockerfile downloads arch-specific QEMU .so via TARGETARCH
- docker-publish.yml adds setup-qemu-action and platforms: linux/amd64,linux/arm64
- qemu-lcgamboa submodule updated (matrix build for both architectures)
LED fix:
- LEDs now require cathode wired to GND (or LOW GPIO) to light up
- Previously LEDs turned on with anode HIGH regardless of cathode connection
- Updated tests to verify anode+cathode behavior
Replace arduino-cli with ESP-IDF 4.4.7 for ESP32 compilation — Arduino-compiled
firmware crashes in QEMU (9-28 reboots) while ESP-IDF boots cleanly (0 reboots).
The new espidf_compiler translates Arduino WiFi/WebServer sketches to native
ESP-IDF C code, compiles with cmake+ninja, and merges into 4MB flash images.
Key changes:
- ESP-IDF compiler: translates WiFi.begin/WebServer to esp_wifi/esp_http_server
- ESP-IDF project template with QEMU-optimized sdkconfig (DIO, 40MHz, no WDT)
- WiFi status parser for ESP-IDF serial logs (wifi_status, ble_status events)
- IoT Gateway HTTP reverse proxy for ESP32 web servers
- WiFi/BLE auto-detection from sketch content + visual status icons
- Static IP 192.168.4.15 matching slirp DHCP first-client range
- Docker: new espidf-builder stage with ESP-IDF 4.4.7 toolchain
- 157 tests covering WiFi/BLE for both ESP32 (Xtensa) and ESP32-C3 (RISC-V)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
fix: improve session ID handling in Esp32Bridge and update WebSocket close logging
chore: mark subprojects as dirty in QEMU, RP2040, and Wokwi elements libraries
- Added board-agnostic sensor registration methods in RP2040Simulator.
- Enhanced ComplexParts to handle LEDC PWM duty updates for ESP32.
- Updated ProtocolParts to check if the simulator handles sensor protocols natively, delegating to backend if applicable.
- Introduced pre-registration of sensors in useSimulatorStore for ESP32 to prevent race conditions.
- Added tests for ESP32 DHT22 sensor registration flow, ensuring proper delegation and fallback mechanisms.
- Created tests for ESP32 Servo and Potentiometer interactions, verifying PWM subscriptions and ADC handling.
- Implemented SensorControlPanel component to allow real-time adjustments of sensor values during simulation.
- Introduced SensorUpdateRegistry for communication between UI and simulation.
- Added configuration for various sensors including sliders and buttons for user interaction.
- Enhanced existing sensor parts to support updates from SensorControlPanel.
- Created CSS styles for the SensorControlPanel layout and controls.
- Implemented a simple LED blink program in C for the ESP32-C3, targeting RV32IMC architecture.
- Created a linker script to define memory layout for the ESP32-C3.
- Added build script to compile the blink program using the riscv32-esp-elf-gcc toolchain.
- Developed Esp32C3Simulator to emulate ESP32-C3 behavior in the browser, including GPIO and UART functionality.
- Implemented utility functions to parse ESP32 flash images and handle loading of binary data.
- Included disassembly output for debugging purposes.
- Added necessary test fixtures for the blink example.
- Introduced ArduinoMega component for rendering in the simulator.
- Updated SimulatorCanvas to handle Arduino Mega board type.
- Enhanced AVRSimulator to support ATmega2560 architecture, including PWM pin mapping and port management.
- Modified PinManager to accommodate Mega's non-linear pin mapping.
- Updated boardPinMapping utility to include Mega analog pins.
- Adjusted Wokwi import/export functionality to recognize and handle Arduino Mega.
- Updated useSimulatorStore to initialize AVRSimulator with the correct board variant.
- Added LogicGateParts.ts for simulating various logic gates (AND, NAND, OR, NOR, XOR, NOT).
- Introduced ProtocolParts.ts for simulating I2C and SPI components including SSD1306 OLED, DS1307 RTC, MPU6050 IMU, DHT22 sensor, HX711 load cell, IR receiver, IR remote, and MicroSD card.
- Implemented BasicParts.ts with a membrane keypad and rotary dialer simulations.
- Enhanced SensorParts.ts with a single NeoPixel and PIR motion sensor.
- Updated index.ts to include new parts for logic gates and protocols.
- Modified vite-env.d.ts to declare new custom elements for the added components.
- Introduced new SensorParts.ts to handle various sensors including tilt switch, temperature sensor, gas sensor, flame sensor, heart beat sensor, and sound sensors.
- Implemented stepper motor simulation with full-step decoding.
- Added utility functions for ADC voltage injection in partUtils.ts, supporting both AVR and RP2040.
- Updated BasicParts.ts to avoid re-registering the 7-segment display.
- Enhanced ComplexParts.ts by removing unused ADC helper functions.
- Updated index.ts to include the new SensorParts module.
- Updated Vite environment definitions to include new custom elements for sensors and stepper motors.
- Simplified serial data handling in `useSimulatorStore` for both AVR and RP2040 simulators.
- Introduced `boardPinMapping.ts` to map wokwi-element pin names to simulator GPIO/pin numbers for Arduino Uno and Nano RP2040.
- Added `compilationLogger.ts` to parse compile results into structured log entries for better console output.
- Implemented a comprehensive backend test suite in `test_compilation.py` to validate the Arduino CLI installation, AVR core presence, compilation service, and API endpoint functionality.
- Created a frontend test suite in `simulation.test.ts` to test the `PinManager` and `AVRSimulator` components, ensuring proper functionality and integration.
- Introduced new components for wire management in the simulator, including `PinOverlay`, `WireInProgressRenderer`, `WireLayer`, and `WireRenderer`, enhancing the visual wiring system.
- Developed utility functions for pin position calculations and wire color management, ensuring accurate connections and visual representation.
- Added types for wire management in `wire.ts`, defining structures for wire endpoints, control points, and signal types.
David Montero Crespo
copilot-swe-agent[bot]