refactor: Update wiring examples for E32 OLED integration; correct pin mappings for VCC, GND, DATA, and CLK
test: Improve unit tests for ESPIDFCompiler; add scenarios for library resolution and CMake patching
chore: Mark subproject commits as dirty for wokwi-libs
Two bugs causing "can't save project" reports:
1. SaveProjectModal: validate currentProject.id is a real UUID before
calling updateProject. If id is "none" or any non-UUID string, fall
through to createProject instead, avoiding PUT /api/projects/none.
2. ProjectByIdPage: call clearCurrentProject() when the project fetch
fails (404/403/error). Prevents stale project IDs from a previous
session polluting the store and triggering spurious update calls.
Two bugs fixed:
1. SaveProjectModal was reading from the legacy global `files` array instead
of the active board's file group, causing projects to be saved with the
wrong board_type (e.g. 'arduino-uno' for ESP32 projects).
Now reads from fileGroups[activeBoard.activeFileGroupId] and uses
activeBoard.boardKind for board_type.
2. Error handling was always showing "Save failed." — now shows:
- "Server unreachable. Check your connection and try again." for network errors
- "Not authenticated. Please log in and try again." for 401 responses
- The server's detail message (with status code) for other errors
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Frontend WiFi detection via file-content scanning was unreliable because
fileGroups[board.activeFileGroupId] could be an empty array (not null),
bypassing the ?? fallback to editorState.files.
Fix: the ESP-IDF compiler now returns has_wifi:bool in its compile response.
The frontend stores this on the BoardInstance and uses it in startBoard()
instead of scanning file contents. The file-content scan is kept as a
fallback for boards that haven't been compiled in this session.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- handleRun now auto-compiles for ESP32/QEMU boards when no firmware is
available (same behavior as AVR/RP2040 boards)
- startBoard now reloads compiledProgram into the bridge if _pendingFirmware
was lost (e.g. after a page refresh between compile and run)
- Adds Esp32Bridge.hasFirmware() helper used by the store check
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace arduino-cli with ESP-IDF 4.4.7 for ESP32 compilation — Arduino-compiled
firmware crashes in QEMU (9-28 reboots) while ESP-IDF boots cleanly (0 reboots).
The new espidf_compiler translates Arduino WiFi/WebServer sketches to native
ESP-IDF C code, compiles with cmake+ninja, and merges into 4MB flash images.
Key changes:
- ESP-IDF compiler: translates WiFi.begin/WebServer to esp_wifi/esp_http_server
- ESP-IDF project template with QEMU-optimized sdkconfig (DIO, 40MHz, no WDT)
- WiFi status parser for ESP-IDF serial logs (wifi_status, ble_status events)
- IoT Gateway HTTP reverse proxy for ESP32 web servers
- WiFi/BLE auto-detection from sketch content + visual status icons
- Static IP 192.168.4.15 matching slirp DHCP first-client range
- Docker: new espidf-builder stage with ESP-IDF 4.4.7 toolchain
- 157 tests covering WiFi/BLE for both ESP32 (Xtensa) and ESP32-C3 (RISC-V)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Implemented ExampleLoaderPage to load examples by ID from the URL.
- Added ExampleLoaderPage route to App component.
- Created ShareModal for sharing project links with visibility toggle.
- Updated UserProfilePage to include share button for user projects.
- Enhanced ExamplesGallery with a copy link button for examples.
- Introduced utility function loadExample to streamline example loading and library installation.
- Updated project visibility management in useProjectStore.
- Added styles for new components and buttons.
- Updated .gitignore to include Arduino compilation byproducts.
Extends MicroPython support (Phase 2) to ESP32 Xtensa boards running on
QEMU. Firmware is downloaded from micropython.org, cached in IndexedDB,
and loaded into QEMU. User code is injected via the raw-paste REPL
protocol after the MicroPython REPL boots.
- Create Esp32MicroPythonLoader.ts for firmware download/cache
- Add raw-paste REPL injection (Ctrl+A → Ctrl+E → code → Ctrl+D) to Esp32Bridge
- Extend loadMicroPythonProgram in store for ESP32 path
- Add ESP32 default MicroPython content (GPIO 2 blink)
- Simplify SerialMonitor Ctrl+C/D to work for all MicroPython boards
- Bundle fallback firmware for ESP32 and ESP32-S3
- Add all ESP32 board variants to SerialMonitor tab maps
Closes#3 (Phase 2)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Implements MicroPython emulation for Raspberry Pi Pico boards running
entirely in the browser using rp2040js. Users can toggle between
Arduino C++ and MicroPython modes via a language selector dropdown.
Key changes:
- Add LanguageMode type and BOARD_SUPPORTS_MICROPYTHON to board types
- Create MicroPythonLoader.ts: UF2 firmware parser, LittleFS filesystem
builder (via littlefs-wasm), IndexedDB firmware caching
- Extend RP2040Simulator with loadMicroPython() method using USBCDC for
serial REPL instead of UART
- Add setBoardLanguageMode and loadMicroPythonProgram store actions
- Update EditorToolbar with language toggle and MicroPython compile flow
- Enhance SerialMonitor with REPL label, Ctrl+C/D support
- Bundle MicroPython v1.20.0 UF2 firmware as fallback in public/firmware/
- Update useEditorStore to create main.py default for MicroPython mode
Closes#3
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#14
- Right-click context menu on boards with "Remove board" option
- Delete/Backspace key removes the active board (when no component selected)
- Confirmation dialog before removal showing connected wire count
- Removing a board also removes all connected wires and cleans up
file groups, simulators, bridges, and VFS
- Cannot remove the last remaining board (button disabled + guard)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#81
- Add `codeChangedSinceLastCompile` dirty flag to useEditorStore
- Play button now triggers compilation automatically when no compiled
program exists or code has changed since last compile
- Show compilation progress during auto-compile before run
- If compilation fails, show errors instead of running stale code
- Keep separate Compile button for manual compile-only workflow
- Play button always enabled (disabled only while running/compiling)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Added tracking for simulation events: start, stop, and reset.
- Implemented tracking for library manager interactions, including library installations.
- Enhanced project management tracking with save and create project events.
- Integrated tracking for user authentication events: sign-up and login.
- Added tracking for CTA clicks on landing and SEO pages.
- Updated analytics utility functions to support new tracking events.
- Improved GitHub and Discord link tracking in the app header.
- Refactored existing components to utilize new tracking functions for better user engagement insights.
- Implemented SensorControlPanel component to allow real-time adjustments of sensor values during simulation.
- Introduced SensorUpdateRegistry for communication between UI and simulation.
- Added configuration for various sensors including sliders and buttons for user interaction.
- Enhanced existing sensor parts to support updates from SensorControlPanel.
- Created CSS styles for the SensorControlPanel layout and controls.
- Added `onPinStateChange` method to `ChipParts` for handling pin state changes in 7-segment displays.
- Updated `useOscilloscopeStore` to allow independent monitoring of multiple boards by adding `boardId` to channels and modifying `addChannel` method.
- Modified `getOscilloscopeCallback` in `useSimulatorStore` to filter channels based on `boardId` and pin number.
- Adjusted component and board position calculations in `useSimulatorStore` to account for wrapper offsets.
- Updated submodule references for `qemu-lcgamboa`, `rp2040js`, and `wokwi-elements` to indicate dirty states.
- Implemented a simple LED blink program in C for the ESP32-C3, targeting RV32IMC architecture.
- Created a linker script to define memory layout for the ESP32-C3.
- Added build script to compile the blink program using the riscv32-esp-elf-gcc toolchain.
- Developed Esp32C3Simulator to emulate ESP32-C3 behavior in the browser, including GPIO and UART functionality.
- Implemented utility functions to parse ESP32 flash images and handle loading of binary data.
- Included disassembly output for debugging purposes.
- Added necessary test fixtures for the blink example.
- Implemented ATtiny85 visual component with DIP-8 layout and built-in LED.
- Added Raspberry Pi Pico W web component using official SVG and pin mapping.
- Created RISC-V Board visual component with SOP-20 style and built-in LED.
- Introduced RiscVCore class for minimal RV32I ISA interpreter with memory model.
- Developed RiscVSimulator class for CH32V003-compatible simulator with UART and GPIO support.
- Updated subproject commits for qemu-lcgamboa, rp2040js, and wokwi-elements to dirty state.
- Add VirtualFileSystem component for managing files and directories.
- Integrate useVfsStore for state management of the virtual file system.
- Implement context menu for file operations: New File, New Folder, Rename, Delete.
- Add upload functionality to send files to Raspberry Pi.
- Create default file structure for new Raspberry Pi boards.
- Enhance editor with board-aware features and compile/run orchestration.
- Introduce CompileAllProgress component for tracking compilation status across boards.
- Redesign SerialMonitor to support multiple boards with tabbed interface.
- Establish Raspberry Pi specific workspace with terminal and file system integration.
- Updated wire structure to replace control points with waypoints for better handling of wire paths.
- Introduced new utility functions for wire hit detection and rendering segments.
- Enhanced wire creation process to support dynamic waypoints and color assignment.
- Implemented a new ESP32 worker for improved simulation handling.
- Added utility functions for generating orthogonal paths and auto-coloring wires based on pin names.
- Improved compatibility with existing projects by ensuring backward compatibility with wire data structures.
- Added detailed logging for GPIO changes, system events, and errors in simulation websocket.
- Improved ESP32 firmware handling by merging individual binaries into a single 4MB flash image.
- Updated ESP32 bridge to handle serial output and GPIO changes with appropriate logging.
- Introduced integration test for ESP32 emulation, covering compilation, WebSocket connection, and event handling.
- Enhanced examples to include ESP32 projects and updated the examples gallery to reflect new board types.
- Refactored simulator store to manage ESP32 bridge and simulator instances more effectively.
- Updated requirements to include esptool for ESP32 firmware management.
- Added ESP32 emulation plan and architecture documentation.
- Created `esp_qemu_manager.py` for managing ESP32 QEMU instances.
- Modified backend API routes to support ESP32 firmware loading and GPIO handling.
- Introduced `Esp32Bridge.ts` for frontend communication with ESP32 instances.
- Refactored simulator store to support multiple boards, including Raspberry Pi and Arduino.
- Created `RaspberryPi3Bridge.ts` for WebSocket communication between frontend and backend for Raspberry Pi.
- Updated QEMU manager to handle multiple serial ports for Raspberry Pi GPIO communication.
- Enhanced SimulatorCanvas to render multiple boards and manage wire routing between them.
- Implemented board picker modal for selecting and adding boards to the canvas.
- Updated editor to support multiple file groups per board.
- Added migration logic for loading old project formats into the new multi-board structure.
- Ensured backward compatibility with existing components and functionality.
- Introduced new BoardKind types for Raspberry Pi 3B and updated BoardInstance interface.
- Added BOARD_KIND_LABELS and BOARD_KIND_FQBN mappings for new board types.
- Implemented physical to BCM GPIO mapping for Raspberry Pi 3B in boardPinMapping utility.
- Updated BOARD_COMPONENT_IDS to include Raspberry Pi 3B.
- Enhanced isBoardComponent function to support new board type.
- Modified boardPinToNumber function to handle pin mapping for Raspberry Pi 3B.
- Created a new DocsPage component for project documentation with links to GitHub and Discord.
- Added Arduino sketch for serial communication test between Raspberry Pi and Arduino.
- Implemented avr_runner.js to emulate ATmega328P and bridge serial communication over TCP.
- Developed a Python test script to validate the serial integration between the emulated Raspberry Pi and Arduino.
- Improve ring buffer efficiency: one array copy instead of two (slice+shift+push vs slice+spread)
- Fix extra whitespace in canvas dimension assignments
- Add explanatory comments for eslint-disable-next-line react-hooks/exhaustive-deps
Co-authored-by: davidmonterocrespo24 <47928504+davidmonterocrespo24@users.noreply.github.com>
- Add useOscilloscopeStore with ring-buffer sample storage and channel management
- Add onPinChangeWithTime callback to AVRSimulator (fires on every bit transition with cycle-derived timestamp)
- Add onPinChangeWithTime callback to RP2040Simulator (fires on GPIO state change)
- Wire oscilloscope callbacks in useSimulatorStore (initSimulator + setBoardType)
- Create Oscilloscope React component with canvas-based waveform rendering
- Add oscilloscope panel to EditorPage (resizable bottom panel, same as SerialMonitor)
- Add 'Scope' toggle button to SimulatorCanvas toolbar
Co-authored-by: davidmonterocrespo24 <47928504+davidmonterocrespo24@users.noreply.github.com>
- Single-finger pan on empty canvas background
- Single-finger drag for components and board
- Two-finger pinch-to-zoom centered on pinch midpoint
- Tap to open property dialog / deselect on mobile
- Add touch-action: none CSS to prevent browser scroll conflicts
- Add data-board-overlay attribute for touch target detection
Co-authored-by: davidmonterocrespo24 <47928504+davidmonterocrespo24@users.noreply.github.com>
- Introduced ArduinoMega component for rendering in the simulator.
- Updated SimulatorCanvas to handle Arduino Mega board type.
- Enhanced AVRSimulator to support ATmega2560 architecture, including PWM pin mapping and port management.
- Modified PinManager to accommodate Mega's non-linear pin mapping.
- Updated boardPinMapping utility to include Mega analog pins.
- Adjusted Wokwi import/export functionality to recognize and handle Arduino Mega.
- Updated useSimulatorStore to initialize AVRSimulator with the correct board variant.
- Added LogicGateParts.ts for simulating various logic gates (AND, NAND, OR, NOR, XOR, NOT).
- Introduced ProtocolParts.ts for simulating I2C and SPI components including SSD1306 OLED, DS1307 RTC, MPU6050 IMU, DHT22 sensor, HX711 load cell, IR receiver, IR remote, and MicroSD card.
- Implemented BasicParts.ts with a membrane keypad and rotary dialer simulations.
- Enhanced SensorParts.ts with a single NeoPixel and PIR motion sensor.
- Updated index.ts to include new parts for logic gates and protocols.
- Modified vite-env.d.ts to declare new custom elements for the added components.
Backend:
- project_files.py: read/write sketch files to /app/data/projects/{id}/
- GET /api/projects/{id}: load project by ID (public = anyone, private = owner only)
- create/update write files to disk volume; delete removes them
- ProjectResponse includes files[] list loaded from disk
Frontend:
- /project/:id canonical route -> ProjectByIdPage
- ProjectPage (legacy /:username/:slug) redirects to /project/:id after load
- SaveProjectModal sends files[] and navigates to /project/{id} after save
- DATA_DIR env var in both compose files
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add LoginPage and RegisterPage for user authentication.
- Create UserProfilePage to display user projects.
- Implement ProjectPage for viewing and editing individual projects.
- Introduce authService for handling user login, registration, and session management.
- Add projectService for managing project data retrieval and manipulation.
- Enhance EditorPage with file management capabilities and save prompts.
- Introduce Zustand stores for managing authentication, editor state, and project state.
- Add reserved usernames utility to prevent certain usernames during registration.
- Update compilation service to handle multiple files for Arduino sketches.
- Simplified serial data handling in `useSimulatorStore` for both AVR and RP2040 simulators.
- Introduced `boardPinMapping.ts` to map wokwi-element pin names to simulator GPIO/pin numbers for Arduino Uno and Nano RP2040.
- Added `compilationLogger.ts` to parse compile results into structured log entries for better console output.
- Implemented SerialMonitor component to display serial output and allow user input.
- Enhanced AVRSimulator to handle USART communication and transmit serial data.
- Updated useSimulatorStore to manage serial output state and toggle visibility of the Serial Monitor.
- Added example Arduino sketches for serial communication, including Serial Echo and Serial LED Control.
- Introduced I2CBusManager to manage virtual I2C devices and integrated with AVRSimulator.
- Added PWM duty cycle tracking and callback registration to PinManager.
- Introduced methods for handling analog voltage injection and callbacks.
- Updated updatePort method to notify digital pin listeners.
- Improved listener management with clearAllListeners method.
feat: Expand BasicParts with new components
- Registered new components: 6mm Pushbutton, Slide Switch, DIP Switch 8, LED Bar Graph, and 7-Segment Display.
- Implemented event handling for each component to interact with the AVR simulator.
feat: Introduce ComplexParts with advanced components
- Added RGB LED with PWM support for color mixing.
- Implemented Potentiometer and Slide Potentiometer for analog input.
- Created Photoresistor Sensor to simulate light levels.
- Developed Analog Joystick for two-axis control and button press.
- Added Servo motor simulation with pulse width modulation.
- Implemented Buzzer using Web Audio API for sound generation.
- Created LCD 1602 and 2004 simulations with command/data processing.
- Updated components-metadata.json with new generation timestamp.
- Added event handling for button presses and releases in DynamicComponent.
- Improved ExamplesGallery with new styles for placeholders and previews.
- Introduced LCD 20x4 display example with corresponding code and wiring.
- Enhanced SimulatorCanvas to subscribe components to pin changes.
- Implemented PartSimulationRegistry for managing component simulation logic.
- Added basic and complex parts simulation including pushbuttons, LEDs, and LCDs.
- Created utility functions for capturing canvas previews and generating SVG previews for example projects.
- Created a new TypeScript file for component metadata types defining structure for dynamically loaded components.
- Implemented a metadata generator script that scans the wokwi-elements repository to extract component information, including properties and categories.
- Added package.json and package-lock.json for dependency management, including TypeScript and related tools.
- Introduced a new file to log ping statistics for testing purposes.
- Implemented a comprehensive backend test suite in `test_compilation.py` to validate the Arduino CLI installation, AVR core presence, compilation service, and API endpoint functionality.
- Created a frontend test suite in `simulation.test.ts` to test the `PinManager` and `AVRSimulator` components, ensuring proper functionality and integration.
- Introduced new components for wire management in the simulator, including `PinOverlay`, `WireInProgressRenderer`, `WireLayer`, and `WireRenderer`, enhancing the visual wiring system.
- Developed utility functions for pin position calculations and wire color management, ensuring accurate connections and visual representation.
- Added types for wire management in `wire.ts`, defining structures for wire endpoints, control points, and signal types.
- Added SimulatorCanvas component for rendering the simulator interface.
- Integrated Wokwi components (Arduino, LED, Resistor, Pushbutton, Potentiometer) into the simulator.
- Created PinManager to handle pin state changes and notifications.
- Developed AVRSimulator class for emulating Arduino Uno functionality.
- Implemented hex file loading and compilation service.
- Added CSS styles for the simulator interface.
- Established Zustand stores for managing editor and simulator states.
- Created utility functions for parsing Intel HEX format.
- Set up Vite configuration for the frontend project.
- Added batch scripts for starting backend and frontend servers, and updating Wokwi libraries.
David Montero Crespo
copilot-swe-agent[bot]