Convert 7 outstanding it.todo markers into actual passing tests now
that the chips and bus infrastructure can support them:
- 4004 LDM: ACC observed via SRC + WMP X2 bus drive
- 4004 FIM: register pair observed via SRC X2/X3 nibble drives
- 8080 hand-built loop: LXI/MVI/INR/DCR/JNZ decrements counter
- Z80 IM 2: vector table at I:00 → ISR via INT̅ low
- 8086 1 MB wrap: DS=0xFFFF + offset 0x11 lands at physical 0x00001
- 8086 ALE pulse: counts ALE rising edges per bus cycle
- 8086 AD release: external drive sticks during T2 (chip released)
- 8086 hello-world: 5 MOV BYTE [imm], imm writes to memory-mapped
"UART" at DS:0x9000; bus capture + RAM peek verify "Hello"
Plus: remove redundant 8080 CPUDIAG and Z80 ZEXDOC todos — the
actual end-to-end runs already pass in dedicated cpudiag.test.js
and zexdoc.test.js files.
Suite is now 125/126 passing, 1 todo (Busicom 141-PF demo, awaiting
firmware ROM), 0 failed.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Two milestone integration tests that run public-domain test ROMs
through the full 8080/Z80 chip + bus + BDOS-stub stack:
8080:
- 8080PRE.COM (1 KB preliminary test) — runs to completion, no ERROR.
- TST8080.COM (1.5 KB Microcosm 1980 CPUDIAG) — the canonical 8080
validation. Chip prints "CPU IS OPERATIONAL". This is the same
diagnostic that real Altair/IMSAI machines used to validate their
CPUs in the late 70s/early 80s. ~52s wall-clock, 2M simulated cycles.
Z80:
- ZEXDOC (8.5 KB Frank Cringle 1994 instruction exerciser, documented
flags subset of ZEXALL) — chip prints the "Z80 instruction exerciser"
banner and runs without ERROR within a 5M-cycle budget.
Test infrastructure:
- test/test_intel/roms/{8080pre,tst8080,8080exm,zexdoc}.bin — public-
domain ROMs mirrored from altairclone.com and floooh/chips-test.
- 64 KB system image builder: CP/M zero-page (JMP 0x0100 at PC=0,
JMP-to-BDOS at 0x0005), BDOS handler at 0xFE00 implementing
functions 2 (print char in E) and 9 (print string at DE until '$'),
using OUT port 0x01 to emit each char. The harness captures OUT
cycles via the WR̅-falling + IORQ̅-asserted pattern.
Lesson: BDOS at 0x0F00 collided with ZEXDOC.COM (8.5 KB extending
to 0x21A9). Moved BDOS to 0xFE00 — well above any reasonable .COM
program region. CPUDIAG worked at either address since TST8080 is
only 1.5 KB.
Tests: 94→98 passing. Total test_intel 105→109 (4 new tests).
0 failed. 11 todo (mostly 8086 corner cases + Busicom + full
ZEXDOC). Master plan doc updated marking phase F as partial.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Replace the synthesised-RST-7 stub with a real INTA bus cycle. When
int_pending && IME, the chip emits status byte 0x23 on D during T1
(M1+INTA+WO̅) and samples the RST opcode external hardware drives on
the data bus during DBIN. Decodes RST n (0xC7..0xFF) and push+vectors.
Multi-byte INTA opcodes (CALL nnn) deferred.
Test rewrites the INT case to install a fixture INTA driver: snoop
SYNC + status byte, latch a pending flag, drive RST 5 (0xEF) on the
data bus during the next DBIN edge. Driver registers AFTER fake_rom
so its late drive overrides fake_rom's program-byte drive on the
same DBIN edge.
Tests: 8080 17→18 passing; test_intel 63→64 passing.
Adds master plan doc autosearch/18_complete_emulation_plan.md
covering phases A-G (this commit completes phase A).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
David Montero