The 4001 is the canonical ROM partner of the 4004/4040. 16-pin DIP,
256 bytes of mask-programmed ROM accessed over the 4-bit multiplexed
nibble bus, plus 4 I/O port lines (WRR/RDR — not yet wired).
Implementation: ~140 LOC clean-room from MCS-4 manual §V. The chip
has its own timer at 1351 ns (matching the 4004's clock period), with
a state machine that walks the 8-phase frame in lockstep with the
4004:
S_IDLE → (SYNC↑) → S_SAMPLE_LOW (A1 nibble) → S_SAMPLE_MID (A2) →
S_SAMPLE_HIGH (A3, addr complete) → S_DRIVE_HI (M1, drive opcode
high nibble) → S_DRIVE_LO (M2, drive low nibble) → S_POST (X1..X3
idle) → wait for next SYNC.
Timing trick: the 4001 must be added to the board BEFORE the 4004
so its tickTimers fires first per advanceNanos. The 4001 then runs
one frame "behind" the 4004 — sampling what the 4004 drove last
frame and driving what the 4004 will read this frame. Documented in
the chip's source and the master plan.
Integration test (`test_buses/4001-rom.test.js`) wires both chips on
the same board and verifies the 4004 actually fetches and executes
opcodes from the 4001 (PC walks 0, 1, 2 with the embedded NOP image).
This is the first end-to-end test of the 4-bit multiplexed bus
working between two real WASM chips on the canvas, not just JS
helpers — proving the bus model scales.
Deferred for the next Phase D iteration: 4002 RAM (similar shape +
SRC chip-select latching), 4004 SRC/WRM/RDM wiring to exchange data
with the 4002, and the Busicom 141-PF integration once both ROM and
RAM chips are real.
Tests: total test_intel 98 → 99 passing, 0 failed, 11 todo.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
f7223b4965