- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
- Implement `serial-batching.test.ts` to verify the behavior of `createSerialBatcher`, ensuring it coalesces multiple appends into a single flush, preserves byte order, and groups by board.
- Create `spice-rectifier-integration.test.ts` to test the end-to-end functionality of the Half-Wave Rectifier example, covering the entire simulation pipeline from input building to circuit solving.
- Add `spice-rectifier-live-repro.test.ts` to reproduce a live-app failure scenario, tracing through each layer of the simulation to identify potential failure points.
- Introduce `spice-signal-generator-tran.test.ts` to validate the behavior of the signal generator and ensure correct analysis type switching based on circuit components.
- Establish `serialBatcher.ts` to implement a batching mechanism for USART output, reducing the frequency of store updates and preventing React's maximum update depth error.
- Introduced I2C_SENSOR_MAP for pre-registering I2C sensors in the simulator store.
- Implemented I2C slave state machines for MPU6050, BMP280, DS1307, and DS3231 sensors in esp32_i2c_slaves.py.
- Added unit tests for I2C slave functionality covering BMP280, DS1307, DS3231, and I2CWriteSink.
- Updated the simulator store to handle I2C address resolution and sensor data management.
- Marked submodules as dirty in wokwi-libs for rp2040js and wokwi-elements.
- Implemented _MPU6050Slave and _BMP280Slave classes for I2C communication.
- Enhanced main function to register these sensors and handle I2C events.
- Updated sensor management to support MPU-6050, BMP280, DS1307, DS3231, SSD1306, and PCF8574.
- Added frontend examples for BMP280 weather station and SSD1306 OLED display.
- Modified Esp32Bridge to handle new I2C transaction events.
- Updated ProtocolParts to support ESP32 path for I2C devices.
- Enhanced useSimulatorStore to manage I2C transaction listeners.
Frontend WiFi detection via file-content scanning was unreliable because
fileGroups[board.activeFileGroupId] could be an empty array (not null),
bypassing the ?? fallback to editorState.files.
Fix: the ESP-IDF compiler now returns has_wifi:bool in its compile response.
The frontend stores this on the BoardInstance and uses it in startBoard()
instead of scanning file contents. The file-content scan is kept as a
fallback for boards that haven't been compiled in this session.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
startBoard() was reading useEditorStore.getState().files (the legacy global
array with the default Arduino sketch) instead of the board's specific file
group. This caused hasWifi to always be false for ESP32 boards, so QEMU
never received the -nic flag and WiFi never connected.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- handleRun now auto-compiles for ESP32/QEMU boards when no firmware is
available (same behavior as AVR/RP2040 boards)
- startBoard now reloads compiledProgram into the bridge if _pendingFirmware
was lost (e.g. after a page refresh between compile and run)
- Adds Esp32Bridge.hasFirmware() helper used by the store check
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace arduino-cli with ESP-IDF 4.4.7 for ESP32 compilation — Arduino-compiled
firmware crashes in QEMU (9-28 reboots) while ESP-IDF boots cleanly (0 reboots).
The new espidf_compiler translates Arduino WiFi/WebServer sketches to native
ESP-IDF C code, compiles with cmake+ninja, and merges into 4MB flash images.
Key changes:
- ESP-IDF compiler: translates WiFi.begin/WebServer to esp_wifi/esp_http_server
- ESP-IDF project template with QEMU-optimized sdkconfig (DIO, 40MHz, no WDT)
- WiFi status parser for ESP-IDF serial logs (wifi_status, ble_status events)
- IoT Gateway HTTP reverse proxy for ESP32 web servers
- WiFi/BLE auto-detection from sketch content + visual status icons
- Static IP 192.168.4.15 matching slirp DHCP first-client range
- Docker: new espidf-builder stage with ESP-IDF 4.4.7 toolchain
- 157 tests covering WiFi/BLE for both ESP32 (Xtensa) and ESP32-C3 (RISC-V)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Extends MicroPython support (Phase 2) to ESP32 Xtensa boards running on
QEMU. Firmware is downloaded from micropython.org, cached in IndexedDB,
and loaded into QEMU. User code is injected via the raw-paste REPL
protocol after the MicroPython REPL boots.
- Create Esp32MicroPythonLoader.ts for firmware download/cache
- Add raw-paste REPL injection (Ctrl+A → Ctrl+E → code → Ctrl+D) to Esp32Bridge
- Extend loadMicroPythonProgram in store for ESP32 path
- Add ESP32 default MicroPython content (GPIO 2 blink)
- Simplify SerialMonitor Ctrl+C/D to work for all MicroPython boards
- Bundle fallback firmware for ESP32 and ESP32-S3
- Add all ESP32 board variants to SerialMonitor tab maps
Closes#3 (Phase 2)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Implements MicroPython emulation for Raspberry Pi Pico boards running
entirely in the browser using rp2040js. Users can toggle between
Arduino C++ and MicroPython modes via a language selector dropdown.
Key changes:
- Add LanguageMode type and BOARD_SUPPORTS_MICROPYTHON to board types
- Create MicroPythonLoader.ts: UF2 firmware parser, LittleFS filesystem
builder (via littlefs-wasm), IndexedDB firmware caching
- Extend RP2040Simulator with loadMicroPython() method using USBCDC for
serial REPL instead of UART
- Add setBoardLanguageMode and loadMicroPythonProgram store actions
- Update EditorToolbar with language toggle and MicroPython compile flow
- Enhance SerialMonitor with REPL label, Ctrl+C/D support
- Bundle MicroPython v1.20.0 UF2 firmware as fallback in public/firmware/
- Update useEditorStore to create main.py default for MicroPython mode
Closes#3
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Closes#14
- Right-click context menu on boards with "Remove board" option
- Delete/Backspace key removes the active board (when no component selected)
- Confirmation dialog before removal showing connected wire count
- Removing a board also removes all connected wires and cleans up
file groups, simulators, bridges, and VFS
- Cannot remove the last remaining board (button disabled + guard)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Added board-agnostic sensor registration methods in RP2040Simulator.
- Enhanced ComplexParts to handle LEDC PWM duty updates for ESP32.
- Updated ProtocolParts to check if the simulator handles sensor protocols natively, delegating to backend if applicable.
- Introduced pre-registration of sensors in useSimulatorStore for ESP32 to prevent race conditions.
- Added tests for ESP32 DHT22 sensor registration flow, ensuring proper delegation and fallback mechanisms.
- Created tests for ESP32 Servo and Potentiometer interactions, verifying PWM subscriptions and ADC handling.
- Updated components-metadata.json with new generated timestamp.
- Refactored Esp32C3Simulator.ts to remove unnecessary debug variables and logging, and added support for additional ROM functions.
- Modified useSimulatorStore.ts to clarify bridge usage for ESP32 boards.
- Updated submodules for QEMU and other libraries to indicate dirty state.
- Added test_esp32c3_emulation.py for end-to-end testing of ESP32-C3 emulation, including compilation, flash image merging, and GPIO event checking.
- Added `onPinStateChange` method to `ChipParts` for handling pin state changes in 7-segment displays.
- Updated `useOscilloscopeStore` to allow independent monitoring of multiple boards by adding `boardId` to channels and modifying `addChannel` method.
- Modified `getOscilloscopeCallback` in `useSimulatorStore` to filter channels based on `boardId` and pin number.
- Adjusted component and board position calculations in `useSimulatorStore` to account for wrapper offsets.
- Updated submodule references for `qemu-lcgamboa`, `rp2040js`, and `wokwi-elements` to indicate dirty states.
- Implemented a simple LED blink program in C for the ESP32-C3, targeting RV32IMC architecture.
- Created a linker script to define memory layout for the ESP32-C3.
- Added build script to compile the blink program using the riscv32-esp-elf-gcc toolchain.
- Developed Esp32C3Simulator to emulate ESP32-C3 behavior in the browser, including GPIO and UART functionality.
- Implemented utility functions to parse ESP32 flash images and handle loading of binary data.
- Included disassembly output for debugging purposes.
- Added necessary test fixtures for the blink example.
- Implemented ATtiny85 visual component with DIP-8 layout and built-in LED.
- Added Raspberry Pi Pico W web component using official SVG and pin mapping.
- Created RISC-V Board visual component with SOP-20 style and built-in LED.
- Introduced RiscVCore class for minimal RV32I ISA interpreter with memory model.
- Developed RiscVSimulator class for CH32V003-compatible simulator with UART and GPIO support.
- Updated subproject commits for qemu-lcgamboa, rp2040js, and wokwi-elements to dirty state.
- Add VirtualFileSystem component for managing files and directories.
- Integrate useVfsStore for state management of the virtual file system.
- Implement context menu for file operations: New File, New Folder, Rename, Delete.
- Add upload functionality to send files to Raspberry Pi.
- Create default file structure for new Raspberry Pi boards.
- Enhance editor with board-aware features and compile/run orchestration.
- Introduce CompileAllProgress component for tracking compilation status across boards.
- Redesign SerialMonitor to support multiple boards with tabbed interface.
- Establish Raspberry Pi specific workspace with terminal and file system integration.
- Updated wire structure to replace control points with waypoints for better handling of wire paths.
- Introduced new utility functions for wire hit detection and rendering segments.
- Enhanced wire creation process to support dynamic waypoints and color assignment.
- Implemented a new ESP32 worker for improved simulation handling.
- Added utility functions for generating orthogonal paths and auto-coloring wires based on pin names.
- Improved compatibility with existing projects by ensuring backward compatibility with wire data structures.
- Added detailed logging for GPIO changes, system events, and errors in simulation websocket.
- Improved ESP32 firmware handling by merging individual binaries into a single 4MB flash image.
- Updated ESP32 bridge to handle serial output and GPIO changes with appropriate logging.
- Introduced integration test for ESP32 emulation, covering compilation, WebSocket connection, and event handling.
- Enhanced examples to include ESP32 projects and updated the examples gallery to reflect new board types.
- Refactored simulator store to manage ESP32 bridge and simulator instances more effectively.
- Updated requirements to include esptool for ESP32 firmware management.
- Added ESP32 emulation plan and architecture documentation.
- Created `esp_qemu_manager.py` for managing ESP32 QEMU instances.
- Modified backend API routes to support ESP32 firmware loading and GPIO handling.
- Introduced `Esp32Bridge.ts` for frontend communication with ESP32 instances.
- Refactored simulator store to support multiple boards, including Raspberry Pi and Arduino.
- Created `RaspberryPi3Bridge.ts` for WebSocket communication between frontend and backend for Raspberry Pi.
- Updated QEMU manager to handle multiple serial ports for Raspberry Pi GPIO communication.
- Enhanced SimulatorCanvas to render multiple boards and manage wire routing between them.
- Implemented board picker modal for selecting and adding boards to the canvas.
- Updated editor to support multiple file groups per board.
- Added migration logic for loading old project formats into the new multi-board structure.
- Ensured backward compatibility with existing components and functionality.
- Introduced new BoardKind types for Raspberry Pi 3B and updated BoardInstance interface.
- Added BOARD_KIND_LABELS and BOARD_KIND_FQBN mappings for new board types.
- Implemented physical to BCM GPIO mapping for Raspberry Pi 3B in boardPinMapping utility.
- Updated BOARD_COMPONENT_IDS to include Raspberry Pi 3B.
- Enhanced isBoardComponent function to support new board type.
- Modified boardPinToNumber function to handle pin mapping for Raspberry Pi 3B.
- Created a new DocsPage component for project documentation with links to GitHub and Discord.
- Added Arduino sketch for serial communication test between Raspberry Pi and Arduino.
- Implemented avr_runner.js to emulate ATmega328P and bridge serial communication over TCP.
- Developed a Python test script to validate the serial integration between the emulated Raspberry Pi and Arduino.
- Add useOscilloscopeStore with ring-buffer sample storage and channel management
- Add onPinChangeWithTime callback to AVRSimulator (fires on every bit transition with cycle-derived timestamp)
- Add onPinChangeWithTime callback to RP2040Simulator (fires on GPIO state change)
- Wire oscilloscope callbacks in useSimulatorStore (initSimulator + setBoardType)
- Create Oscilloscope React component with canvas-based waveform rendering
- Add oscilloscope panel to EditorPage (resizable bottom panel, same as SerialMonitor)
- Add 'Scope' toggle button to SimulatorCanvas toolbar
Co-authored-by: davidmonterocrespo24 <47928504+davidmonterocrespo24@users.noreply.github.com>
- Introduced ArduinoMega component for rendering in the simulator.
- Updated SimulatorCanvas to handle Arduino Mega board type.
- Enhanced AVRSimulator to support ATmega2560 architecture, including PWM pin mapping and port management.
- Modified PinManager to accommodate Mega's non-linear pin mapping.
- Updated boardPinMapping utility to include Mega analog pins.
- Adjusted Wokwi import/export functionality to recognize and handle Arduino Mega.
- Updated useSimulatorStore to initialize AVRSimulator with the correct board variant.
David Montero Crespo
copilot-swe-agent[bot]