Two independent defects, both visible as "the NTC reports the wrong
temperature" (issue #233).
1. The part built its divider against a hard-coded 5 V rail, while the SPICE
path used the board's real rail. They only agreed on AVR. On a 3.3 V board
the injected node sat above the ADC's full scale: the slider at 25 C read
~1.4 C, and every slider value below ~11 C saturated to the same number, so
-40, 0 and 10 C were indistinguishable. The rail now comes from the board
(analogRailVolts), matching setAdcVoltage's own AVR/RP2040/ESP32 split.
2. The divider convention was corrected in 608c2538 (VCC -> R_pull -> OUT ->
R_NTC -> GND) but data/examples.ts was not updated with it, so three of the
four bundled NTC sketches still decoded the OTHER topology. Their readings
came out mirrored about 25 C: the uno-ntc example printed -3.42 C with the
slider at 60 C - the exact symptom dd22bcfe had recorded as the bug. Fixed
in uno-ntc, pico-ntc and attiny85-ntc-sensor; examples-circuits.ts was
already right.
The sibling analog sensors (gas, flame, heart-beat, sound) map their sliders
0..1023 onto the same hard-coded 5 V and will saturate the same way on 3.3 V
boards. Left alone here: that is not what #233 reports, and each one needs its
examples re-checked before changing.
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Replaced syncStoreProperty function with emitPropertyChange to decouple parts from Zustand store.
- Updated relay component mapping to ensure proper handling of coil and contact states.
- Added new test cases for half-wave rectifier and relay-controlled LED to ensure correct functionality.
- Introduced InlineComponentSVGs for schematic-style icons of various components.
- Updated submodule references for qemu-lcgamboa, rp2040js, and wokwi-elements to indicate dirty state.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
- Introduced new SensorParts.ts to handle various sensors including tilt switch, temperature sensor, gas sensor, flame sensor, heart beat sensor, and sound sensors.
- Implemented stepper motor simulation with full-step decoding.
- Added utility functions for ADC voltage injection in partUtils.ts, supporting both AVR and RP2040.
- Updated BasicParts.ts to avoid re-registering the 7-segment display.
- Enhanced ComplexParts.ts by removing unused ADC helper functions.
- Updated index.ts to include the new SensorParts module.
- Updated Vite environment definitions to include new custom elements for sensors and stepper motors.
David Montero Crespo