Closes the remaining gaps in cross-board I2C so any topology of
supported boards (Uno↔ESP32, two ESP32s, Uno↔Uno↔Uno, ESP32-C3
connected to anything, etc.) works end-to-end with all I2C
components including write-only sinks (SSD1306, PCF8574, LCD-I2C).
Implementation (6 phases):
1. **BFS routing in I2CBusManager**: connectToSlave + handleExternalConnect
walk the bridge graph with a visited Set so multi-hop chains
(A↔B↔C with the device on C) resolve transparently. A new
forwarder-device shim is installed at intermediate hops so the
existing handleExternalWrite/Read/Stop machinery routes
through without per-method visited tracking.
2. **Per-peer proxy ownership in Esp32BridgeShim**: replaces the
global _proxiedAddrs Set with _proxiedByPeer Map so concurrent
bridges to the same ESP32 (e.g. wired to both Uno and Pico)
don't wipe each other's proxies on teardown. Interconnect's
per-wire teardown calls clearProxiesForPeer(peerBus) instead of
clearAllProxies.
3. **BFS-aware proxy sync**: syncProxyFromPeer now walks the peer
bus + its transitive bridges, so an ESP32 sees devices on
boards two or more hops away. _peerDeviceLookup keeps a flat
addr → device map for write-forwarding and resync.
4. **Periodic resync (250 ms)**: Esp32BridgeShim runs a setInterval
while any proxy is live, re-dumping each device with
dumpRegisters() and pushing updateProxyI2c only when an XOR-
stride hash changes. This keeps RTC time advancing visible to
ESP32 firmware without flooding the WS pipe with static
calibration dumps. Hash is primed during initial sync so the
first tick doesn't push a redundant identical buffer.
5. **Write-forwarding ProxySlave → peer**: backend ProxySlave
buffers write bytes during the transaction and emits a
`proxy_i2c_complete` event on STOP / repeated-START. Frontend
Esp32Bridge dispatches the event to a new onProxyI2cComplete
callback; the shim replays the byte sequence on the actual
peer I2CDevice via writeByte() + stop(). Makes ESP32 firmware
writes to peer SSD1306 actually repaint the OLED, peer PCF8574
latch updates, peer I2CMemoryDevice register mutations propagate.
6. **ESP32-C3 routed as bridge**: Interconnect.isBrowserSim no
longer claims c3/xiao-c3/c3-supermini — they were already
going through Esp32Bridge per the store's ESP32_RISCV_KINDS
routing, but Interconnect was treating them as browser sims
which broke proxy install. isEsp32Bridge now correctly
includes c3 family + ESP32-S3 + Arduino Nano ESP32.
Defensive: addBoard now disposes any existing shim's proxies
before overwriting simulatorMap entry so test reruns don't leak
timers.
Tests:
- 4 BFS multi-hop tests (i2c-multi-board-slave-gap.test.ts)
- 11 cross-board scenarios + per-peer + write-forward + resync
(i2c-esp32-multiboard-bridge.test.ts)
- 1 real-firmware E2E for write-forward via QEMU (compile +
load + observe proxy_i2c_complete arriving with the byte)
- New sketch fixture: esp32_i2c_write_to_peer.ino
Result: 90 test files / 1295 tests pass / 0 fail.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Implemented `i2c-esp32-real-firmware.test.ts` to test ESP32 I2C communication via backend and WebSocket.
- Created `load-example-transitions.test.ts` to ensure proper loading of examples between board-less and board-based contexts.
- Added `CircuitVerificationModal.tsx` to display circuit verification results before running simulations.
- Developed `circuitVerifier.ts` to perform pre-flight checks for circuit safety, identifying potential issues like short circuits and component overloads.
- Introduced minimal ESP32 I2C master sketch `esp32_i2c_writer.ino` for testing I2C transactions.
- Implement HD44780Decoder for decoding I2C commands to HD44780-compatible LCDs.
- Add bmp280_bridge_reader.ino to read BMP280 chip_id and status registers via I2C.
- Create i2c_scanner_multi.ino to scan I2C addresses and report responding devices.
- Introduce lcd_i2c_hello.ino to demonstrate basic LCD functionality with I2C.
- Implement pcf8574_bidirectional.ino to test bidirectional communication with PCF8574.
- Add pico_i2c_master_reader.ino for reading BMP280 from a Raspberry Pi Pico.
- Create rtc_lcd_clock.ino to display time from a DS1307 RTC on an I2C LCD.
components-metadata.json is shaped { version, components: [...] }, not a
flat array. The previous test assumed the latter and crashed on
default.find at module load on master, breaking CI for every PR.
Closes the loop on the four ESP32 fixes that landed earlier in this
series. Each previously-broken or noisy example now has a regression
test that compiles the sketch through the production ESP-IDF compiler
and runs it in QEMU via esp32_worker.py — the same code path the
WebSocket /ws/{client_id} endpoint drives in production. Testing the
worker directly skips the WS transport but exercises the same compile
→ flash → boot → serial cascade.
Coverage:
- TestEsp32SerialCleanliness — DHT22, Servo+Pot, Joystick, Dual ADC
Asserts the user's Serial.print substring shows up AND no
`I (xxx) gpio:|wifi:|phy:` info-level ESP-IDF logs leak through.
This validates the sdkconfig CONFIG_LOG_DEFAULT_LEVEL_WARN change
from commit b373c97.
- TestEsp32CompileSuccess — BLE Advertise, LEDC RGB
BLE Advertise validates the sdkconfig switch to Bluedroid (was
NimBLE-only, which broke arduino-esp32's BLEDevice.h).
LEDC RGB validates velxio_compat.h's ledcAttach() shim from
commit f6f6f43; the sketch uses the arduino-esp32 3.x one-shot API
on a 2.0.17 toolchain.
- TestEsp32WiFiSketches — WiFi Connect, WiFi WebServer
Regression coverage to make sure the sdkconfig changes didn't break
WiFi association. Connect must reach an "IP Address:" line; Server
must report "Server started".
- frontend/src/__tests__/component-metadata-bmp280.test.ts
Sanity check that the BMP280 entry from commit 1f3f2e0 survives
metadata regeneration.
All ESP-IDF/QEMU tests use unittest.skipUnless on
_toolchain_available() so they no-op cleanly on dev boxes without
libqemu-xtensa, and only do real work in the Docker CI image.
Sketches are inlined verbatim from the public Velxio examples.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds the foundation for canvas undo/redo. UI wiring, keyboard shortcuts,
toolbar buttons and agent-tools refactor land in follow-up commits.
useSimulatorStore.ts:
- New CanvasCommand type — { description, execute, undo }.
- HISTORY_MAX = 50 (oldest entries dropped on overflow).
- New state: history[] + historyIndex (-1 = empty).
- New APIs: pushCommand(cmd, {applyNow?}), undo, redo, canUndo, canRedo,
clearHistory.
- New "recorded" actions that wrap raw mutators with a CanvasCommand:
recordAddComponent, recordRemoveComponent, recordMove, recordRotate,
recordSetProperty, recordAddWire, recordRemoveWire, recordUpdateWire.
- recordRemoveComponent captures both the component AND any wires that
cascade with it, so undo restores both atomically.
- recordMove also re-runs updateWirePositions on undo/redo so wire
endpoints follow the component back/forward.
- setComponents and setWires (project-load / clear paths) now call
clearHistory inline — leaving stale commands pointing at IDs that no
longer exist would crash on undo.
Why custom Command pattern over zundo / travels:
- The store has 30+ ephemeral fields (simulator instances, serialOutput
growing byte-by-byte, hexEpoch counter, wireInProgress that ticks 60×/s
on drag). Snapshot/diff middleware would either burn memory tracking
them or need a fragile partialize allow-list.
- Per-op descriptions ("Add LED", "Move resistor") for tooltips come for
free with this approach; zundo/travels would need to infer them.
Tests: 15/15 in src/__tests__/undo-redo.test.ts — covers cap-at-50,
redo-truncation, cascade undo of remove-component, move/rotate/property
round trips, bulk-setter clearing.
Raw mutators (addComponent / removeComponent / updateComponent / addWire /
removeWire / updateWire) are unchanged. UI handlers can keep using them
during live drags for preview frames without spamming history; the
record* actions are what drag-end, click-finish and agent tools should
call going forward.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The directory grew well beyond Wokwi-only contents: it now hosts
lcgamboa's QEMU fork (qemu-lcgamboa), Espressif's esp32-camera, the
ngspice WASM build, fritzing-parts, picowi, an alternative QEMU
(qemu-esp32), the 100_Days_100_IoT_Projects examples repo, and
Wokwi's own avr8js/rp2040js/wokwi-elements/wokwi-features/wokwi-boards.
"wokwi-libs" was misleading — half the contents have nothing to do
with Wokwi. "third-party/" is the standard convention for vendored
external dependencies.
Mechanical changes:
Path rename:
wokwi-libs/ → third-party/
update-wokwi-libs.bat → update-third-party.bat
docs/WOKWI_LIBS.md → docs/THIRD_PARTY.md
Submodule reconfiguration:
.gitmodules — 4 path= and section names updated
.git/modules/wokwi-libs/ → .git/modules/third-party/
each submodule's .git file rewired to ../../.git/modules/third-party/<name>
Reference updates (~80 files): vite.config.ts aliases, Dockerfile
COPY paths, GH Actions workflow steps, build_qemu_*.sh, all
docs/* and test/*/autosearch/* entries that mention the path,
package-lock.json file: dependencies, .gitignore patterns,
sitemap.xml + index.html SEO blurbs, scripts/generate-component-*,
.dockerignore, .idea/vcs.xml. Bulk replaced both `wokwi-libs/`
(path) and bare `wokwi-libs` (textual mentions in docs/comments).
Verified:
- npx tsc -b --noEmit produces no new errors related to these paths
- vite.config.ts aliases now point at ../third-party/avr8js etc.
- All 4 git submodules (avr8js, rp2040js, wokwi-elements,
wokwi-features) are linked under third-party/ with their
worktrees re-populated and config files referencing the new path
- `grep -r wokwi-libs` returns zero hits outside node_modules,
.vite, frontend/dist, third-party/ (upstream submodule contents),
*.pyc caches, and *.dll.pre-camera rollback binaries
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
CI's Frontend Tests workflow had been failing on master for ~15 runs.
Two pre-existing issues, neither related to the SPI refactor in 8b1433d
or the ESP32-CAM work:
1. RP2040Simulator mock missing attachCyw43 method (23 test files)
PR #126 (8e769f8 "feat(multi-board): add wire-aware cross-board
interconnect router", merged 2026-04-25) added a Pico-W-specific
`sim.attachCyw43(bridge)` call inside addBoard(). The 23 test files
that mock RP2040Simulator with vi.fn weren't updated; whenever a
test path created a Pico W board the mock threw "TypeError:
sim.attachCyw43 is not a function" and aborted addBoard.
Fix: add `this.attachCyw43 = vi.fn()` to every affected mock.
Also pre-populate `this.spi = { onByte: null, completeTransfer: vi.fn() }`
so any future SPI-part tests don't trip on the new generic .spi
adapter from 8b1433d.
2. install-libraries.test.ts payload mismatch
PR #135 (b1026ec7 "library-version-uninstall", merged 2026-04-29)
extended `installLibrary(name)` to `installLibrary(name, version?)`
and now sends `{name, version: version ?? null}` over the wire.
The test still asserted `{name}` only and failed.
Fix: assert `{name, version: null}` for the no-version call.
Verified locally: 1161 passed | 1 skipped (was 1117 passed | 44 failed).
Backend E2E "Run HC-SR04 e2e test" is a separate failure that needs
its own investigation — it downloads QEMU binaries from a release and
runs real firmware compilation, which I can't reproduce on Windows.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Implement UC8159cDecoder for handling 7-colour ACeP panels.
- Introduce painting functions for UC8159c frames in EPaperPart.
- Update EPaperPart to handle both SSD168x and UC8159c frame types.
- Add integration tests for EPaperPart and UC8159cDecoder.
- Create example sketch for 5.65" ACeP 7-colour panel.
- Enhance error handling in test cases for library dependencies.
- Introduced EPaperPanels.ts to define configurations for various ePaper panels including dimensions, refresh rates, and controller details.
- Implemented SSD168xDecoder.ts to handle the decoding of SPI commands for the SSD168x family of ePaper displays.
- Created EPaperPart.ts to manage the simulation of ePaper panels, integrating with the existing simulator architecture and handling events.
- Added example sketches for 2.13", 2.9", 4.2", and 7.5" ePaper displays, demonstrating basic functionality and text rendering.
- Ensured compatibility with AVR, RP2040, and ESP32 platforms, with appropriate pin configurations for each.
- Introduced SVG layout dimensions for Phase 1 (B/W mono) and Phase 2 (colour) ePaper panels, detailing active areas, bezels, and pin layouts.
- Developed a phased emulation plan outlining the architecture and deliverables for different panel types, including SSD168x and UC81xx.
- Created a canonical "Hello, World!" sketch for the 1.54" ePaper panel, ensuring compatibility across ESP32, Raspberry Pi Pico, and Arduino Uno.
- Implemented a pure Python SSD168x decoder to validate SPI command sets and framebuffers against specifications.
- Added tests for compiling the hello-world sketch across supported boards and for the SSD168x protocol to ensure correct framebuffer behavior.
- Implemented handshake tests to validate initial bus state and register responses.
- Created end-to-end tests for Pico W LED blinking using MicroPython firmware.
- Added SDPCM framing tests to ensure proper encoding and decoding of control frames.
- Developed IOCTL tests to verify command responses and state changes in the emulator.
- Established a full lifecycle test for WiFi operations, including scanning, connecting, and packet handling.
- Introduced TypeScript configuration for test files to ensure compatibility and strict type checking.
Fixes the user-reported bug where two RPi Pico W boards wired GP0↔GP1
running SerialPassthrough don't communicate. Replaces the broken
broadcast-style cross-board logic in addBoard (only routed AVR↔Pi3B,
ignored wires entirely, no RP2040↔anything path) with a wire-aware
Interconnect singleton.
Architecture: digital pin transitions are the lowest-common-denominator
abstraction. Each simulator's hardware peripherals (UART/I2C/SPI) and
bit-banging libraries (SoftwareSerial, software I2C) decode the
transitions naturally — propagate the pin and the protocols come for
free. For cross-process boards (ESP32 backend QEMU, Pi3B QEMU) a
byte-level shortcut is additionally enabled on hardware-UART pin
pairs to handle high-baud links over WebSocket latency.
Implementation:
- New simulation/Interconnect.ts singleton subscribes to wire/board
changes via the Zustand store. Handlers per tier: browser-sim →
pinManager.onPinChange, ESP32 → Esp32Bridge.sendPinEvent, Pi3B →
bridge.sendPinEvent. Re-entrancy guard via per-(board,pin) Set.
- New utils/boardProtocols.ts classifies pins (uart-tx, i2c-sda, etc.)
per board kind, used as optimization hint for the byte shortcut.
- types/wire.ts: added signalType field, exports WireSignalType /
WireColorMap (fixes a pre-existing TS import error in wireColors).
- Deleted the bridgeMap/simulatorMap broadcast forEach blocks in
addBoard. Initial board + future boards register with Interconnect
via setInterconnectRuntime + store subscription.
- PinManager.resetPinStates() helper for test isolation.
Tests (16 new files, 96 tests, all passing):
- Per-pair × per-protocol matrix: dual-arduino-digital,
dual-pico-digital, arduino-pico-digital, triple-pico-digital-chain,
dual-arduino-hw-uart, dual-arduino-software-serial,
arduino-pico-mixed-uart, arduino-esp32-uart, dual-esp32-uart,
pi3-pico-uart, arduino-pico-i2c, arduino-arduino-spi,
interconnect-routing, dual-arduino-multi-protocol (UART+I2C+SPI+
digital + concurrent), dual-pico-multi-protocol (UART0+UART1 alt+
I2C0+I2C1+SPI0+digital + 3-Pico star topology)
- Updated dual-pico-serial-passthrough to assert correct behaviour
- Backend test/multi_board_esp32/test_dual_esp32_serial.py for two
real QEMU instances (skip-graceful when lcgamboa lib absent)
Verified: 1107/1107 tests pass, zero regressions, vite build OK.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Implemented a script to inject passive-component preset variants into `scripts/component-overrides.json`, including resistors, capacitors, and inductors with custom names and thumbnails.
- Added a new custom element `<wokwi-capacitor-electrolytic>` representing a polarized aluminum-can capacitor with appropriate SVG representation.
- Updated metadata generation to accommodate new component names and thumbnails for better user experience in the component picker.
- Marked submodules `qemu-lcgamboa` and `rp2040js` as dirty to reflect local changes.
- Replaced syncStoreProperty function with emitPropertyChange to decouple parts from Zustand store.
- Updated relay component mapping to ensure proper handling of coil and contact states.
- Added new test cases for half-wave rectifier and relay-controlled LED to ensure correct functionality.
- Introduced InlineComponentSVGs for schematic-style icons of various components.
- Updated submodule references for qemu-lcgamboa, rp2040js, and wokwi-elements to indicate dirty state.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
- Implement `serial-batching.test.ts` to verify the behavior of `createSerialBatcher`, ensuring it coalesces multiple appends into a single flush, preserves byte order, and groups by board.
- Create `spice-rectifier-integration.test.ts` to test the end-to-end functionality of the Half-Wave Rectifier example, covering the entire simulation pipeline from input building to circuit solving.
- Add `spice-rectifier-live-repro.test.ts` to reproduce a live-app failure scenario, tracing through each layer of the simulation to identify potential failure points.
- Introduce `spice-signal-generator-tran.test.ts` to validate the behavior of the signal generator and ensure correct analysis type switching based on circuit components.
- Establish `serialBatcher.ts` to implement a batching mechanism for USART output, reducing the frequency of store updates and preventing React's maximum update depth error.
- Decoupled electrical simulation from the simulator store, ensuring SPICE is always active for accurate circuit analysis.
- Removed feature flag for electrical simulation, simplifying the state management.
- Preloaded SPICE engine at app start to eliminate latency during the first solve.
- Added comprehensive tests for MOSFET PWM LED behavior and NPN transistor switch functionality, ensuring correct current flow and response to pin states.
- Implemented diagnostics for floating input nodes in RC low-pass filter circuits, addressing singular matrix issues in SPICE simulations.
- Introduced active semiconductor metadata registry for better component management and simulation fidelity.
- Updated Vite configuration to force re-bundling of local wokwi-elements after component additions.
fix: increase timeout for compilation requests to 180 seconds
refactor: call recalculateAllWirePositions after loading examples
chore: update subproject commit for rp2040js to dirty state
chore: update subproject commit for wokwi-elements to dirty state
Previously examples.ts pushed to exampleProjects[] after declaration, which
some bundlers can treat as dead code under aggressive tree-shaking. This
also made HMR unreliable when examples-circuits.ts changed.
Now:
const legacyExamples = [...]
export const exampleProjects = [...legacyExamples, ...circuitExamples]
Single immutable export. Guaranteed to include all 150 examples at import
time. The gallery (ExamplesGallery.tsx) and SSR prerender (entry-server.tsx)
both pick up the new circuit examples automatically.
Also adds frontend/src/__tests__/examples-circuits.test.ts with 5 assertions
to catch future regressions (all circuit ids present, no duplicates, valid
required fields, expected categories covered).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds 44 SPICE mappers, 58 custom metadata entries, and 12 visual
Web Components covering logic gates, transistors, op-amps, regulators,
sources, electromechanical parts and integrated-circuit packaging.
Fase 9 — component catalog expansion
------------------------------------
- 7 logic gates (AND/OR/NAND/NOR/XOR/XNOR + NOT) as SPICE B-sources
- 8 multi-input gates (AND/OR/NAND/NOR with 3 and 4 inputs)
- 9 transistors: 5 BJTs (incl. PNP 2N3906/BC557) + 4 MOSFETs (incl.
P-channel IRF9540/FQP27P06). NMOS refactored from Level=3 W=0.1
(hangs ngspice) to Level=1 with sane W/L
- 5 op-amps: LM358, LM741, TL072, LM324 with per-chip saturation
rails + opamp-ideal
- 4 linear regulators (7805, 7812, 7905, LM317) with dropout
- 3 batteries (9V, AA, coin-cell) with realistic ESR
- Signal generator (sine / square / DC)
- 2 Schottky diodes (1N5817, 1N5819) + photodiode (lux-driven
current source)
Fase 10 — electromechanical + ICs
---------------------------------
- Relay (SPDT): coil + L + S-switch with native hysteresis +
flyback diode, inverted-control trick for the NC contact
- Optocouplers 4N25 and PC817 (LED + CCCS with CTR=0.5 / 1.0)
- 7 74HC ICs as DIP-14 packages emitting 4 or 6 B-sources per
component (first mapper pattern emitting multiple device cards)
- 3 flip-flops (D, T, JK) — digital-sim only (edge detection is
not representable in ngspice .op)
- L293D dual H-bridge motor driver
Infrastructure
--------------
- scripts/component-overrides.json gains a _customComponents[] array
that lets new Velxio-only parts survive metadata regeneration
(previously applyOverrides() could only patch wokwi-elements
components that had already been scanned)
- scripts/generate-component-metadata.ts injects custom entries
before the patch loop
- New ComponentCategory values: 'logic', 'analog', 'electromech'
- frontend/src/components/DynamicComponent.tsx PASSIVE tracing
extended from just ['resistor','resistor-us'] to 9 two-terminal
passives with per-part pin name maps
- New CI workflow test-circuit.yml runs the sandbox on push/PR
- frontend-tests.yml regenerates metadata and fails if committed
JSON is stale
- Documented 2 new ngspice gotchas in circuit-emulation-gotchas.md:
unicode in netlist titles silently hangs the parser, and
MOSFET Level=3 + W=0.1m causes .op to hang
- 164/164 sandbox tests passing in ~9 s (was 88 pre-fase-9)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Implemented Bmp280Element as a custom web component for the BMP280 barometric sensor, including SVG representation and pin configuration.
- Created CircuitPreview component to render circuit thumbnails using SVGs of components, including support for various boards and components.
- Added a script to generate SVG files from wokwi-elements, ensuring proper formatting and structure for reliable rendering.
- Introduced a test HTML generation script to visualize component SVGs.
- Introduced I2C_SENSOR_MAP for pre-registering I2C sensors in the simulator store.
- Implemented I2C slave state machines for MPU6050, BMP280, DS1307, and DS3231 sensors in esp32_i2c_slaves.py.
- Added unit tests for I2C slave functionality covering BMP280, DS1307, DS3231, and I2CWriteSink.
- Updated the simulator store to handle I2C address resolution and sensor data management.
- Marked submodules as dirty in wokwi-libs for rp2040js and wokwi-elements.
Docker multi-arch:
- Dockerfile downloads arch-specific QEMU .so via TARGETARCH
- docker-publish.yml adds setup-qemu-action and platforms: linux/amd64,linux/arm64
- qemu-lcgamboa submodule updated (matrix build for both architectures)
LED fix:
- LEDs now require cathode wired to GND (or LOW GPIO) to light up
- Previously LEDs turned on with anode HIGH regardless of cathode connection
- Updated tests to verify anode+cathode behavior
Replace arduino-cli with ESP-IDF 4.4.7 for ESP32 compilation — Arduino-compiled
firmware crashes in QEMU (9-28 reboots) while ESP-IDF boots cleanly (0 reboots).
The new espidf_compiler translates Arduino WiFi/WebServer sketches to native
ESP-IDF C code, compiles with cmake+ninja, and merges into 4MB flash images.
Key changes:
- ESP-IDF compiler: translates WiFi.begin/WebServer to esp_wifi/esp_http_server
- ESP-IDF project template with QEMU-optimized sdkconfig (DIO, 40MHz, no WDT)
- WiFi status parser for ESP-IDF serial logs (wifi_status, ble_status events)
- IoT Gateway HTTP reverse proxy for ESP32 web servers
- WiFi/BLE auto-detection from sketch content + visual status icons
- Static IP 192.168.4.15 matching slirp DHCP first-client range
- Docker: new espidf-builder stage with ESP-IDF 4.4.7 toolchain
- 157 tests covering WiFi/BLE for both ESP32 (Xtensa) and ESP32-C3 (RISC-V)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
fix: improve session ID handling in Esp32Bridge and update WebSocket close logging
chore: mark subprojects as dirty in QEMU, RP2040, and Wokwi elements libraries
- Added board-agnostic sensor registration methods in RP2040Simulator.
- Enhanced ComplexParts to handle LEDC PWM duty updates for ESP32.
- Updated ProtocolParts to check if the simulator handles sensor protocols natively, delegating to backend if applicable.
- Introduced pre-registration of sensors in useSimulatorStore for ESP32 to prevent race conditions.
- Added tests for ESP32 DHT22 sensor registration flow, ensuring proper delegation and fallback mechanisms.
- Created tests for ESP32 Servo and Potentiometer interactions, verifying PWM subscriptions and ADC handling.
- Implemented SensorControlPanel component to allow real-time adjustments of sensor values during simulation.
- Introduced SensorUpdateRegistry for communication between UI and simulation.
- Added configuration for various sensors including sliders and buttons for user interaction.
- Enhanced existing sensor parts to support updates from SensorControlPanel.
- Created CSS styles for the SensorControlPanel layout and controls.
- Implemented a simple LED blink program in C for the ESP32-C3, targeting RV32IMC architecture.
- Created a linker script to define memory layout for the ESP32-C3.
- Added build script to compile the blink program using the riscv32-esp-elf-gcc toolchain.
- Developed Esp32C3Simulator to emulate ESP32-C3 behavior in the browser, including GPIO and UART functionality.
- Implemented utility functions to parse ESP32 flash images and handle loading of binary data.
- Included disassembly output for debugging purposes.
- Added necessary test fixtures for the blink example.
- Introduced ArduinoMega component for rendering in the simulator.
- Updated SimulatorCanvas to handle Arduino Mega board type.
- Enhanced AVRSimulator to support ATmega2560 architecture, including PWM pin mapping and port management.
- Modified PinManager to accommodate Mega's non-linear pin mapping.
- Updated boardPinMapping utility to include Mega analog pins.
- Adjusted Wokwi import/export functionality to recognize and handle Arduino Mega.
- Updated useSimulatorStore to initialize AVRSimulator with the correct board variant.
- Added LogicGateParts.ts for simulating various logic gates (AND, NAND, OR, NOR, XOR, NOT).
- Introduced ProtocolParts.ts for simulating I2C and SPI components including SSD1306 OLED, DS1307 RTC, MPU6050 IMU, DHT22 sensor, HX711 load cell, IR receiver, IR remote, and MicroSD card.
- Implemented BasicParts.ts with a membrane keypad and rotary dialer simulations.
- Enhanced SensorParts.ts with a single NeoPixel and PIR motion sensor.
- Updated index.ts to include new parts for logic gates and protocols.
- Modified vite-env.d.ts to declare new custom elements for the added components.
- Introduced new SensorParts.ts to handle various sensors including tilt switch, temperature sensor, gas sensor, flame sensor, heart beat sensor, and sound sensors.
- Implemented stepper motor simulation with full-step decoding.
- Added utility functions for ADC voltage injection in partUtils.ts, supporting both AVR and RP2040.
- Updated BasicParts.ts to avoid re-registering the 7-segment display.
- Enhanced ComplexParts.ts by removing unused ADC helper functions.
- Updated index.ts to include the new SensorParts module.
- Updated Vite environment definitions to include new custom elements for sensors and stepper motors.
- Simplified serial data handling in `useSimulatorStore` for both AVR and RP2040 simulators.
- Introduced `boardPinMapping.ts` to map wokwi-element pin names to simulator GPIO/pin numbers for Arduino Uno and Nano RP2040.
- Added `compilationLogger.ts` to parse compile results into structured log entries for better console output.
- Implemented a comprehensive backend test suite in `test_compilation.py` to validate the Arduino CLI installation, AVR core presence, compilation service, and API endpoint functionality.
- Created a frontend test suite in `simulation.test.ts` to test the `PinManager` and `AVRSimulator` components, ensuring proper functionality and integration.
- Introduced new components for wire management in the simulator, including `PinOverlay`, `WireInProgressRenderer`, `WireLayer`, and `WireRenderer`, enhancing the visual wiring system.
- Developed utility functions for pin position calculations and wire color management, ensuring accurate connections and visual representation.
- Added types for wire management in `wire.ts`, defining structures for wire endpoints, control points, and signal types.
David Montero Crespo
copilot-swe-agent[bot]