Add a working microSD card part backed by a FAT16 image, following the
Wokwi storage model: the project's own workspace files are auto-copied
onto the card (free), and an optional "SD Card" panel uploads extra
files (gated as a paid feature by the velxio.dev overlay; OSS default
allows it).
Frontend (in-browser AVR / RP2040):
- ProtocolParts.ts: rewrite the microsd-card part from a handshake stub
into a real SD-over-SPI device (reply-first Ncr timing, SDSC byte
addressing, single/multi-block read+write, CSD/CID, full CMD set).
- utils/fatImage.ts: dependency-free FAT16 super-floppy builder (8.3 + LFN).
- utils/sdCardFiles.ts: assemble the card image from workspace files plus
uploaded files; base64 helpers.
- components/simulator/SdCardPanel.tsx + ComponentPropertyDialog: upload UI.
- DynamicComponent + useSimulatorStore: build and inject the image on run.
- lib/proSdCardGate.ts: overlay-installable gate for the upload action.
- data/examples-storage-microsd.ts: Arduino Uno + ESP32 gallery examples.
Backend (ESP32 via QEMU):
- services/esp32_sd_slave.py: synchronous SD-over-SPI slave (Python port of
the browser part) with a sparse backing store, idle-state R1 tracking and
real CRC16 on data blocks when the host enables CRC (CMD59) -- both
required by ESP-IDF's sdspi driver.
- esp32_worker.py: route SPI bytes to the slave (returns MISO synchronously)
and feed write-only bulk transfers.
- esp32_lib_manager.py + routes/simulation.py: forward the FAT image
(sd_card.image_b64) from the start config into the worker.
Tested:
- frontend: protocol-parts, fat-image, sd-card-gate and microsd-real-firmware
(real Arduino SD.h on avr8js) -- 86 passing.
- backend: test_esp32_sd_slave (10) covering the ESP-IDF init sequence and
CRC16; validated end to end by running a real SD.h sketch in libqemu-xtensa
(mount, directory listing, read and write-readback).
- Implemented `i2c-esp32-real-firmware.test.ts` to test ESP32 I2C communication via backend and WebSocket.
- Created `load-example-transitions.test.ts` to ensure proper loading of examples between board-less and board-based contexts.
- Added `CircuitVerificationModal.tsx` to display circuit verification results before running simulations.
- Developed `circuitVerifier.ts` to perform pre-flight checks for circuit safety, identifying potential issues like short circuits and component overloads.
- Introduced minimal ESP32 I2C master sketch `esp32_i2c_writer.ino` for testing I2C transactions.
- Implement HD44780Decoder for decoding I2C commands to HD44780-compatible LCDs.
- Add bmp280_bridge_reader.ino to read BMP280 chip_id and status registers via I2C.
- Create i2c_scanner_multi.ino to scan I2C addresses and report responding devices.
- Introduce lcd_i2c_hello.ino to demonstrate basic LCD functionality with I2C.
- Implement pcf8574_bidirectional.ino to test bidirectional communication with PCF8574.
- Add pico_i2c_master_reader.ino for reading BMP280 from a Raspberry Pi Pico.
- Create rtc_lcd_clock.ino to display time from a DS1307 RTC on an I2C LCD.
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Implemented _MPU6050Slave and _BMP280Slave classes for I2C communication.
- Enhanced main function to register these sensors and handle I2C events.
- Updated sensor management to support MPU-6050, BMP280, DS1307, DS3231, SSD1306, and PCF8574.
- Added frontend examples for BMP280 weather station and SSD1306 OLED display.
- Modified Esp32Bridge to handle new I2C transaction events.
- Updated ProtocolParts to support ESP32 path for I2C devices.
- Enhanced useSimulatorStore to manage I2C transaction listeners.
- Added board-agnostic sensor registration methods in RP2040Simulator.
- Enhanced ComplexParts to handle LEDC PWM duty updates for ESP32.
- Updated ProtocolParts to check if the simulator handles sensor protocols natively, delegating to backend if applicable.
- Introduced pre-registration of sensors in useSimulatorStore for ESP32 to prevent race conditions.
- Added tests for ESP32 DHT22 sensor registration flow, ensuring proper delegation and fallback mechanisms.
- Created tests for ESP32 Servo and Potentiometer interactions, verifying PWM subscriptions and ADC handling.
- Implemented SensorControlPanel component to allow real-time adjustments of sensor values during simulation.
- Introduced SensorUpdateRegistry for communication between UI and simulation.
- Added configuration for various sensors including sliders and buttons for user interaction.
- Enhanced existing sensor parts to support updates from SensorControlPanel.
- Created CSS styles for the SensorControlPanel layout and controls.
- Added LogicGateParts.ts for simulating various logic gates (AND, NAND, OR, NOR, XOR, NOT).
- Introduced ProtocolParts.ts for simulating I2C and SPI components including SSD1306 OLED, DS1307 RTC, MPU6050 IMU, DHT22 sensor, HX711 load cell, IR receiver, IR remote, and MicroSD card.
- Implemented BasicParts.ts with a membrane keypad and rotary dialer simulations.
- Enhanced SensorParts.ts with a single NeoPixel and PIR motion sensor.
- Updated index.ts to include new parts for logic gates and protocols.
- Modified vite-env.d.ts to declare new custom elements for the added components.
David Montero
copilot-swe-agent[bot]