Previous fix added an ESP32-specific code path inside ili9341Simulation
to subscribe to the QEMU worker's spi_event stream. That made the LCD
work on ESP32-CAM but left the underlying issue unsolved: every other
SPI part (custom chips, future SD-card emulators, the SSD168x ePaper
already in the codebase) would also need its own per-board branching.
The right shape: every simulator exposes a `.spi` member matching the
SAME SpiBusLike interface, and SPI parts hook .spi.onByte without
caring which board they're attached to. AVRSimulator already had
this — now everything else does too.
frontend/src/simulation/SpiBus.ts (new)
Defines the contract — `onByte: (mosi) => void | null` plus
optional `completeTransfer(miso)`. Documents the single-listener
semantics that AVR has had since day one.
frontend/src/store/useSimulatorStore.ts
Esp32BridgeShim gets a lazy `.spi` getter that wraps
bridge.onSpiByte (the per-byte WS event from the QEMU worker).
completeTransfer is a no-op because the worker drives MISO via
its own _spi_response global. Covers ESP32 (Xtensa), ESP32-S3,
ESP32-CAM, ESP32-C3 — every kind that routes through Esp32Bridge.
frontend/src/simulation/RP2040Simulator.ts
Adds a lazy `.spi` getter that re-routes rp2040.spi[0].onTransmit
through the adapter. Default loopback (the prior behaviour) is
preserved when no part has accessed `.spi` yet — only consumers
that opt in see their handler invoked. Covers Pico and Pico W.
frontend/src/simulation/parts/ComplexParts.ts
ili9341Simulation no longer has an ESP32 special case. Single
code path: `simulator.spi.onByte = handler`. Works on AVR,
RP2040, all ESP32 variants. Same pattern is now available to
every future SPI part — ssd1306, sd-card, oled, etc.
The Esp32Bridge.ts spi_event field-name fix from 6afa62e (msg.data.event
instead of the non-existent msg.data.data) stays in place — that's what
makes the per-byte stream actually arrive in the bridge.
Verified: ILI9341 + ESP32-CAM gallery example renders the live webcam
preview after a hard refresh. The same simulation code works on Arduino
Uno + ILI9341 (the existing ili9341-test-sketch in example_zip).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The ILI9341 part simulation only hooked AVR's SPI peripheral. For
ESP32 the simulator is Esp32BridgeShim (no .spi member), so
attachEvents bailed early and the LCD stayed black even though the
firmware was driving SPI traffic correctly.
The QEMU worker already emits per-byte spi_event WS messages
(see backend/app/services/esp32_worker.py::_on_spi_event), and the
Esp32Bridge already had an onSpiEvent hook — but the bridge was
reading msg.data.data (a non-existent field) instead of decoding
the worker's {bus, event, response} format. Fixed.
Two changes:
1. Esp32Bridge.ts: decode the spi_event payload correctly. The
worker encodes byte transfers as `mosi << 8` (op = low byte = 0x00)
and CS-line changes as `((cs<<1)|level) << 8 | 0x01` (op == 0x01).
Added onSpiByte (per-byte) and onSpiCsChange callbacks alongside
the existing onSpiEvent for backwards compat.
2. ComplexParts.ts ili9341Simulation: detect Esp32BridgeShim via
`getBridge()` duck-type check. When present, subscribe to
bridge.onSpiByte and feed bytes into the same processCommand /
processData pipeline used by the AVR path. DC tracking via
pinManager.onPinChange already works for ESP32 because the bridge
fires triggerPinChange on every gpio_change WS event.
Verified end-to-end: ESP32-CAM + ILI9341 example in the gallery now
renders the live webcam preview to the simulated TFT (160×120 RGB565
centered in the 320×240 panel) at ~3-4 fps.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Implement UC8159cDecoder for handling 7-colour ACeP panels.
- Introduce painting functions for UC8159c frames in EPaperPart.
- Update EPaperPart to handle both SSD168x and UC8159c frame types.
- Add integration tests for EPaperPart and UC8159cDecoder.
- Create example sketch for 5.65" ACeP 7-colour panel.
- Enhance error handling in test cases for library dependencies.
- Introduced EPaperPanels.ts to define configurations for various ePaper panels including dimensions, refresh rates, and controller details.
- Implemented SSD168xDecoder.ts to handle the decoding of SPI commands for the SSD168x family of ePaper displays.
- Created EPaperPart.ts to manage the simulation of ePaper panels, integrating with the existing simulator architecture and handling events.
- Added example sketches for 2.13", 2.9", 4.2", and 7.5" ePaper displays, demonstrating basic functionality and text rendering.
- Ensured compatibility with AVR, RP2040, and ESP32 platforms, with appropriate pin configurations for each.
- Implemented `esp32_spi_chip_demo.ino` to demonstrate SPI communication with a 74HC595 shift register.
- Created `esp32_uart_chip_demo.ino` for UART loopback testing with ROT13 transformation.
- Added Python tests for compiling chips and sketches, ensuring valid WASM output and successful compilation for various board families.
- Developed end-to-end tests for ESP32 with custom chips using I2C and SPI, validating synchronous communication through the backend.
- Introduced GPIO bridge tests to verify serial communication and GPIO state changes.
- Ensured all tests validate the expected behavior of the custom chips and their interaction with the ESP32 firmware.
The SPICE emitter already reads properties.lux (default 500, 100 nA/lux)
but the UI had no way to set it — the static dialog rejected the "range"
control type and there was no entry in SENSOR_CONTROLS for the live panel.
- Add photodiode entry in SENSOR_CONTROLS (slider 0-1000 lux)
- Register a minimal PartSimulationRegistry handler that forwards slider
values via emitPropertyChange so the netlist memo invalidates
- Switch the photodiode lux control from "range" to "number" so the
static ComponentPropertyDialog renders an editable input
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Replaced syncStoreProperty function with emitPropertyChange to decouple parts from Zustand store.
- Updated relay component mapping to ensure proper handling of coil and contact states.
- Added new test cases for half-wave rectifier and relay-controlled LED to ensure correct functionality.
- Introduced InlineComponentSVGs for schematic-style icons of various components.
- Updated submodule references for qemu-lcgamboa, rp2040js, and wokwi-elements to indicate dirty state.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
- Implement `serial-batching.test.ts` to verify the behavior of `createSerialBatcher`, ensuring it coalesces multiple appends into a single flush, preserves byte order, and groups by board.
- Create `spice-rectifier-integration.test.ts` to test the end-to-end functionality of the Half-Wave Rectifier example, covering the entire simulation pipeline from input building to circuit solving.
- Add `spice-rectifier-live-repro.test.ts` to reproduce a live-app failure scenario, tracing through each layer of the simulation to identify potential failure points.
- Introduce `spice-signal-generator-tran.test.ts` to validate the behavior of the signal generator and ensure correct analysis type switching based on circuit components.
- Establish `serialBatcher.ts` to implement a batching mechanism for USART output, reducing the frequency of store updates and preventing React's maximum update depth error.
- Decoupled electrical simulation from the simulator store, ensuring SPICE is always active for accurate circuit analysis.
- Removed feature flag for electrical simulation, simplifying the state management.
- Preloaded SPICE engine at app start to eliminate latency during the first solve.
- Added comprehensive tests for MOSFET PWM LED behavior and NPN transistor switch functionality, ensuring correct current flow and response to pin states.
- Implemented diagnostics for floating input nodes in RC low-pass filter circuits, addressing singular matrix issues in SPICE simulations.
- Introduced active semiconductor metadata registry for better component management and simulation fidelity.
- Updated Vite configuration to force re-bundling of local wokwi-elements after component additions.
Electrical simulation is now active by default (mode='spice' instead of
'off') — users no longer need to toggle the mode on manually. The engine
lazy-loads on first solve, so there is no startup cost penalty.
Changes:
- useElectricalStore: default mode = 'spice' when ELECTRICAL_SIM_ENABLED
- subscribeToStore: ADC_PIN_MAP expanded to all 18 board types (Uno, Nano,
Mega with 16 ADC channels, ATtiny85, RP2040 GP26-29, ESP32/S3/C3 GPIO
ADCs). Voltages from SPICE solutions now inject into MCU ADC peripherals
for all boards.
- BasicParts LED: reads branchCurrents from useElectricalStore when SPICE
is active. Brightness = clamp(|I_led| / 20mA, 0, 1) instead of boolean.
Subscribes to store changes to update in real time.
- ElectricalOverlay: shows per-wire voltage labels (gold monospace on dark
pill) using buildWireNetMap() which replicates the NetlistBuilder's
Union-Find to map wireId -> netName -> nodeVoltage. Summary pill shows
net count + solve time.
- NetlistBuilder: new export buildWireNetMap() for lightweight wire-to-net
resolution without running ngspice.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds 44 SPICE mappers, 58 custom metadata entries, and 12 visual
Web Components covering logic gates, transistors, op-amps, regulators,
sources, electromechanical parts and integrated-circuit packaging.
Fase 9 — component catalog expansion
------------------------------------
- 7 logic gates (AND/OR/NAND/NOR/XOR/XNOR + NOT) as SPICE B-sources
- 8 multi-input gates (AND/OR/NAND/NOR with 3 and 4 inputs)
- 9 transistors: 5 BJTs (incl. PNP 2N3906/BC557) + 4 MOSFETs (incl.
P-channel IRF9540/FQP27P06). NMOS refactored from Level=3 W=0.1
(hangs ngspice) to Level=1 with sane W/L
- 5 op-amps: LM358, LM741, TL072, LM324 with per-chip saturation
rails + opamp-ideal
- 4 linear regulators (7805, 7812, 7905, LM317) with dropout
- 3 batteries (9V, AA, coin-cell) with realistic ESR
- Signal generator (sine / square / DC)
- 2 Schottky diodes (1N5817, 1N5819) + photodiode (lux-driven
current source)
Fase 10 — electromechanical + ICs
---------------------------------
- Relay (SPDT): coil + L + S-switch with native hysteresis +
flyback diode, inverted-control trick for the NC contact
- Optocouplers 4N25 and PC817 (LED + CCCS with CTR=0.5 / 1.0)
- 7 74HC ICs as DIP-14 packages emitting 4 or 6 B-sources per
component (first mapper pattern emitting multiple device cards)
- 3 flip-flops (D, T, JK) — digital-sim only (edge detection is
not representable in ngspice .op)
- L293D dual H-bridge motor driver
Infrastructure
--------------
- scripts/component-overrides.json gains a _customComponents[] array
that lets new Velxio-only parts survive metadata regeneration
(previously applyOverrides() could only patch wokwi-elements
components that had already been scanned)
- scripts/generate-component-metadata.ts injects custom entries
before the patch loop
- New ComponentCategory values: 'logic', 'analog', 'electromech'
- frontend/src/components/DynamicComponent.tsx PASSIVE tracing
extended from just ['resistor','resistor-us'] to 9 two-terminal
passives with per-part pin name maps
- New CI workflow test-circuit.yml runs the sandbox on push/PR
- frontend-tests.yml regenerates metadata and fails if committed
JSON is stale
- Documented 2 new ngspice gotchas in circuit-emulation-gotchas.md:
unicode in netlist titles silently hangs the parser, and
MOSFET Level=3 + W=0.1m causes .op to hang
- 164/164 sandbox tests passing in ~9 s (was 88 pre-fase-9)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Implemented _MPU6050Slave and _BMP280Slave classes for I2C communication.
- Enhanced main function to register these sensors and handle I2C events.
- Updated sensor management to support MPU-6050, BMP280, DS1307, DS3231, SSD1306, and PCF8574.
- Added frontend examples for BMP280 weather station and SSD1306 OLED display.
- Modified Esp32Bridge to handle new I2C transaction events.
- Updated ProtocolParts to support ESP32 path for I2C devices.
- Enhanced useSimulatorStore to manage I2C transaction listeners.
Docker multi-arch:
- Dockerfile downloads arch-specific QEMU .so via TARGETARCH
- docker-publish.yml adds setup-qemu-action and platforms: linux/amd64,linux/arm64
- qemu-lcgamboa submodule updated (matrix build for both architectures)
LED fix:
- LEDs now require cathode wired to GND (or LOW GPIO) to light up
- Previously LEDs turned on with anode HIGH regardless of cathode connection
- Updated tests to verify anode+cathode behavior
- Added board-agnostic sensor registration methods in RP2040Simulator.
- Enhanced ComplexParts to handle LEDC PWM duty updates for ESP32.
- Updated ProtocolParts to check if the simulator handles sensor protocols natively, delegating to backend if applicable.
- Introduced pre-registration of sensors in useSimulatorStore for ESP32 to prevent race conditions.
- Added tests for ESP32 DHT22 sensor registration flow, ensuring proper delegation and fallback mechanisms.
- Created tests for ESP32 Servo and Potentiometer interactions, verifying PWM subscriptions and ADC handling.
- Implemented SensorControlPanel component to allow real-time adjustments of sensor values during simulation.
- Introduced SensorUpdateRegistry for communication between UI and simulation.
- Added configuration for various sensors including sliders and buttons for user interaction.
- Enhanced existing sensor parts to support updates from SensorControlPanel.
- Created CSS styles for the SensorControlPanel layout and controls.
- Added `onPinStateChange` method to `ChipParts` for handling pin state changes in 7-segment displays.
- Updated `useOscilloscopeStore` to allow independent monitoring of multiple boards by adding `boardId` to channels and modifying `addChannel` method.
- Modified `getOscilloscopeCallback` in `useSimulatorStore` to filter channels based on `boardId` and pin number.
- Adjusted component and board position calculations in `useSimulatorStore` to account for wrapper offsets.
- Updated submodule references for `qemu-lcgamboa`, `rp2040js`, and `wokwi-elements` to indicate dirty states.
- Added detailed logging for GPIO changes, system events, and errors in simulation websocket.
- Improved ESP32 firmware handling by merging individual binaries into a single 4MB flash image.
- Updated ESP32 bridge to handle serial output and GPIO changes with appropriate logging.
- Introduced integration test for ESP32 emulation, covering compilation, WebSocket connection, and event handling.
- Enhanced examples to include ESP32 projects and updated the examples gallery to reflect new board types.
- Refactored simulator store to manage ESP32 bridge and simulator instances more effectively.
- Updated requirements to include esptool for ESP32 firmware management.
- Created a new DocsPage component for project documentation with links to GitHub and Discord.
- Added Arduino sketch for serial communication test between Raspberry Pi and Arduino.
- Implemented avr_runner.js to emulate ATmega328P and bridge serial communication over TCP.
- Developed a Python test script to validate the serial integration between the emulated Raspberry Pi and Arduino.
- Added LogicGateParts.ts for simulating various logic gates (AND, NAND, OR, NOR, XOR, NOT).
- Introduced ProtocolParts.ts for simulating I2C and SPI components including SSD1306 OLED, DS1307 RTC, MPU6050 IMU, DHT22 sensor, HX711 load cell, IR receiver, IR remote, and MicroSD card.
- Implemented BasicParts.ts with a membrane keypad and rotary dialer simulations.
- Enhanced SensorParts.ts with a single NeoPixel and PIR motion sensor.
- Updated index.ts to include new parts for logic gates and protocols.
- Modified vite-env.d.ts to declare new custom elements for the added components.
- Introduced new SensorParts.ts to handle various sensors including tilt switch, temperature sensor, gas sensor, flame sensor, heart beat sensor, and sound sensors.
- Implemented stepper motor simulation with full-step decoding.
- Added utility functions for ADC voltage injection in partUtils.ts, supporting both AVR and RP2040.
- Updated BasicParts.ts to avoid re-registering the 7-segment display.
- Enhanced ComplexParts.ts by removing unused ADC helper functions.
- Updated index.ts to include the new SensorParts module.
- Updated Vite environment definitions to include new custom elements for sensors and stepper motors.
- Simplified serial data handling in `useSimulatorStore` for both AVR and RP2040 simulators.
- Introduced `boardPinMapping.ts` to map wokwi-element pin names to simulator GPIO/pin numbers for Arduino Uno and Nano RP2040.
- Added `compilationLogger.ts` to parse compile results into structured log entries for better console output.
- Removed outdated WOKWI_LIBS.md and replaced with updated documentation.
- Added ARCHITECTURE.md to describe project structure and data flow.
- Created SETUP_COMPLETE.md for installation and configuration instructions.
- Implemented automatic update script for Wokwi libraries.
- Updated frontend components to utilize local Wokwi libraries.
- Enhanced AVRSimulator to manage peripherals more efficiently.
- Added example screenshot generation instructions for better documentation.
- Updated components metadata and ensured proper integration with Vite.
- Added PWM duty cycle tracking and callback registration to PinManager.
- Introduced methods for handling analog voltage injection and callbacks.
- Updated updatePort method to notify digital pin listeners.
- Improved listener management with clearAllListeners method.
feat: Expand BasicParts with new components
- Registered new components: 6mm Pushbutton, Slide Switch, DIP Switch 8, LED Bar Graph, and 7-Segment Display.
- Implemented event handling for each component to interact with the AVR simulator.
feat: Introduce ComplexParts with advanced components
- Added RGB LED with PWM support for color mixing.
- Implemented Potentiometer and Slide Potentiometer for analog input.
- Created Photoresistor Sensor to simulate light levels.
- Developed Analog Joystick for two-axis control and button press.
- Added Servo motor simulation with pulse width modulation.
- Implemented Buzzer using Web Audio API for sound generation.
- Created LCD 1602 and 2004 simulations with command/data processing.
David Montero Crespo
copilot-swe-agent[bot]