Closes the loop on the four ESP32 fixes that landed earlier in this
series. Each previously-broken or noisy example now has a regression
test that compiles the sketch through the production ESP-IDF compiler
and runs it in QEMU via esp32_worker.py — the same code path the
WebSocket /ws/{client_id} endpoint drives in production. Testing the
worker directly skips the WS transport but exercises the same compile
→ flash → boot → serial cascade.
Coverage:
- TestEsp32SerialCleanliness — DHT22, Servo+Pot, Joystick, Dual ADC
Asserts the user's Serial.print substring shows up AND no
`I (xxx) gpio:|wifi:|phy:` info-level ESP-IDF logs leak through.
This validates the sdkconfig CONFIG_LOG_DEFAULT_LEVEL_WARN change
from commit b373c97.
- TestEsp32CompileSuccess — BLE Advertise, LEDC RGB
BLE Advertise validates the sdkconfig switch to Bluedroid (was
NimBLE-only, which broke arduino-esp32's BLEDevice.h).
LEDC RGB validates velxio_compat.h's ledcAttach() shim from
commit f6f6f43; the sketch uses the arduino-esp32 3.x one-shot API
on a 2.0.17 toolchain.
- TestEsp32WiFiSketches — WiFi Connect, WiFi WebServer
Regression coverage to make sure the sdkconfig changes didn't break
WiFi association. Connect must reach an "IP Address:" line; Server
must report "Server started".
- frontend/src/__tests__/component-metadata-bmp280.test.ts
Sanity check that the BMP280 entry from commit 1f3f2e0 survives
metadata regeneration.
All ESP-IDF/QEMU tests use unittest.skipUnless on
_toolchain_available() so they no-op cleanly on dev boxes without
libqemu-xtensa, and only do real work in the Docker CI image.
Sketches are inlined verbatim from the public Velxio examples.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds the foundation for canvas undo/redo. UI wiring, keyboard shortcuts,
toolbar buttons and agent-tools refactor land in follow-up commits.
useSimulatorStore.ts:
- New CanvasCommand type — { description, execute, undo }.
- HISTORY_MAX = 50 (oldest entries dropped on overflow).
- New state: history[] + historyIndex (-1 = empty).
- New APIs: pushCommand(cmd, {applyNow?}), undo, redo, canUndo, canRedo,
clearHistory.
- New "recorded" actions that wrap raw mutators with a CanvasCommand:
recordAddComponent, recordRemoveComponent, recordMove, recordRotate,
recordSetProperty, recordAddWire, recordRemoveWire, recordUpdateWire.
- recordRemoveComponent captures both the component AND any wires that
cascade with it, so undo restores both atomically.
- recordMove also re-runs updateWirePositions on undo/redo so wire
endpoints follow the component back/forward.
- setComponents and setWires (project-load / clear paths) now call
clearHistory inline — leaving stale commands pointing at IDs that no
longer exist would crash on undo.
Why custom Command pattern over zundo / travels:
- The store has 30+ ephemeral fields (simulator instances, serialOutput
growing byte-by-byte, hexEpoch counter, wireInProgress that ticks 60×/s
on drag). Snapshot/diff middleware would either burn memory tracking
them or need a fragile partialize allow-list.
- Per-op descriptions ("Add LED", "Move resistor") for tooltips come for
free with this approach; zundo/travels would need to infer them.
Tests: 15/15 in src/__tests__/undo-redo.test.ts — covers cap-at-50,
redo-truncation, cascade undo of remove-component, move/rotate/property
round trips, bulk-setter clearing.
Raw mutators (addComponent / removeComponent / updateComponent / addWire /
removeWire / updateWire) are unchanged. UI handlers can keep using them
during live drags for preview frames without spamming history; the
record* actions are what drag-end, click-finish and agent tools should
call going forward.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
The directory grew well beyond Wokwi-only contents: it now hosts
lcgamboa's QEMU fork (qemu-lcgamboa), Espressif's esp32-camera, the
ngspice WASM build, fritzing-parts, picowi, an alternative QEMU
(qemu-esp32), the 100_Days_100_IoT_Projects examples repo, and
Wokwi's own avr8js/rp2040js/wokwi-elements/wokwi-features/wokwi-boards.
"wokwi-libs" was misleading — half the contents have nothing to do
with Wokwi. "third-party/" is the standard convention for vendored
external dependencies.
Mechanical changes:
Path rename:
wokwi-libs/ → third-party/
update-wokwi-libs.bat → update-third-party.bat
docs/WOKWI_LIBS.md → docs/THIRD_PARTY.md
Submodule reconfiguration:
.gitmodules — 4 path= and section names updated
.git/modules/wokwi-libs/ → .git/modules/third-party/
each submodule's .git file rewired to ../../.git/modules/third-party/<name>
Reference updates (~80 files): vite.config.ts aliases, Dockerfile
COPY paths, GH Actions workflow steps, build_qemu_*.sh, all
docs/* and test/*/autosearch/* entries that mention the path,
package-lock.json file: dependencies, .gitignore patterns,
sitemap.xml + index.html SEO blurbs, scripts/generate-component-*,
.dockerignore, .idea/vcs.xml. Bulk replaced both `wokwi-libs/`
(path) and bare `wokwi-libs` (textual mentions in docs/comments).
Verified:
- npx tsc -b --noEmit produces no new errors related to these paths
- vite.config.ts aliases now point at ../third-party/avr8js etc.
- All 4 git submodules (avr8js, rp2040js, wokwi-elements,
wokwi-features) are linked under third-party/ with their
worktrees re-populated and config files referencing the new path
- `grep -r wokwi-libs` returns zero hits outside node_modules,
.vite, frontend/dist, third-party/ (upstream submodule contents),
*.pyc caches, and *.dll.pre-camera rollback binaries
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
CI's Frontend Tests workflow had been failing on master for ~15 runs.
Two pre-existing issues, neither related to the SPI refactor in 8b1433d
or the ESP32-CAM work:
1. RP2040Simulator mock missing attachCyw43 method (23 test files)
PR #126 (8e769f8 "feat(multi-board): add wire-aware cross-board
interconnect router", merged 2026-04-25) added a Pico-W-specific
`sim.attachCyw43(bridge)` call inside addBoard(). The 23 test files
that mock RP2040Simulator with vi.fn weren't updated; whenever a
test path created a Pico W board the mock threw "TypeError:
sim.attachCyw43 is not a function" and aborted addBoard.
Fix: add `this.attachCyw43 = vi.fn()` to every affected mock.
Also pre-populate `this.spi = { onByte: null, completeTransfer: vi.fn() }`
so any future SPI-part tests don't trip on the new generic .spi
adapter from 8b1433d.
2. install-libraries.test.ts payload mismatch
PR #135 (b1026ec7 "library-version-uninstall", merged 2026-04-29)
extended `installLibrary(name)` to `installLibrary(name, version?)`
and now sends `{name, version: version ?? null}` over the wire.
The test still asserted `{name}` only and failed.
Fix: assert `{name, version: null}` for the no-version call.
Verified locally: 1161 passed | 1 skipped (was 1117 passed | 44 failed).
Backend E2E "Run HC-SR04 e2e test" is a separate failure that needs
its own investigation — it downloads QEMU binaries from a release and
runs real firmware compilation, which I can't reproduce on Windows.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Implement UC8159cDecoder for handling 7-colour ACeP panels.
- Introduce painting functions for UC8159c frames in EPaperPart.
- Update EPaperPart to handle both SSD168x and UC8159c frame types.
- Add integration tests for EPaperPart and UC8159cDecoder.
- Create example sketch for 5.65" ACeP 7-colour panel.
- Enhance error handling in test cases for library dependencies.
- Introduced EPaperPanels.ts to define configurations for various ePaper panels including dimensions, refresh rates, and controller details.
- Implemented SSD168xDecoder.ts to handle the decoding of SPI commands for the SSD168x family of ePaper displays.
- Created EPaperPart.ts to manage the simulation of ePaper panels, integrating with the existing simulator architecture and handling events.
- Added example sketches for 2.13", 2.9", 4.2", and 7.5" ePaper displays, demonstrating basic functionality and text rendering.
- Ensured compatibility with AVR, RP2040, and ESP32 platforms, with appropriate pin configurations for each.
- Introduced SVG layout dimensions for Phase 1 (B/W mono) and Phase 2 (colour) ePaper panels, detailing active areas, bezels, and pin layouts.
- Developed a phased emulation plan outlining the architecture and deliverables for different panel types, including SSD168x and UC81xx.
- Created a canonical "Hello, World!" sketch for the 1.54" ePaper panel, ensuring compatibility across ESP32, Raspberry Pi Pico, and Arduino Uno.
- Implemented a pure Python SSD168x decoder to validate SPI command sets and framebuffers against specifications.
- Added tests for compiling the hello-world sketch across supported boards and for the SSD168x protocol to ensure correct framebuffer behavior.
- Implemented handshake tests to validate initial bus state and register responses.
- Created end-to-end tests for Pico W LED blinking using MicroPython firmware.
- Added SDPCM framing tests to ensure proper encoding and decoding of control frames.
- Developed IOCTL tests to verify command responses and state changes in the emulator.
- Established a full lifecycle test for WiFi operations, including scanning, connecting, and packet handling.
- Introduced TypeScript configuration for test files to ensure compatibility and strict type checking.
Fixes the user-reported bug where two RPi Pico W boards wired GP0↔GP1
running SerialPassthrough don't communicate. Replaces the broken
broadcast-style cross-board logic in addBoard (only routed AVR↔Pi3B,
ignored wires entirely, no RP2040↔anything path) with a wire-aware
Interconnect singleton.
Architecture: digital pin transitions are the lowest-common-denominator
abstraction. Each simulator's hardware peripherals (UART/I2C/SPI) and
bit-banging libraries (SoftwareSerial, software I2C) decode the
transitions naturally — propagate the pin and the protocols come for
free. For cross-process boards (ESP32 backend QEMU, Pi3B QEMU) a
byte-level shortcut is additionally enabled on hardware-UART pin
pairs to handle high-baud links over WebSocket latency.
Implementation:
- New simulation/Interconnect.ts singleton subscribes to wire/board
changes via the Zustand store. Handlers per tier: browser-sim →
pinManager.onPinChange, ESP32 → Esp32Bridge.sendPinEvent, Pi3B →
bridge.sendPinEvent. Re-entrancy guard via per-(board,pin) Set.
- New utils/boardProtocols.ts classifies pins (uart-tx, i2c-sda, etc.)
per board kind, used as optimization hint for the byte shortcut.
- types/wire.ts: added signalType field, exports WireSignalType /
WireColorMap (fixes a pre-existing TS import error in wireColors).
- Deleted the bridgeMap/simulatorMap broadcast forEach blocks in
addBoard. Initial board + future boards register with Interconnect
via setInterconnectRuntime + store subscription.
- PinManager.resetPinStates() helper for test isolation.
Tests (16 new files, 96 tests, all passing):
- Per-pair × per-protocol matrix: dual-arduino-digital,
dual-pico-digital, arduino-pico-digital, triple-pico-digital-chain,
dual-arduino-hw-uart, dual-arduino-software-serial,
arduino-pico-mixed-uart, arduino-esp32-uart, dual-esp32-uart,
pi3-pico-uart, arduino-pico-i2c, arduino-arduino-spi,
interconnect-routing, dual-arduino-multi-protocol (UART+I2C+SPI+
digital + concurrent), dual-pico-multi-protocol (UART0+UART1 alt+
I2C0+I2C1+SPI0+digital + 3-Pico star topology)
- Updated dual-pico-serial-passthrough to assert correct behaviour
- Backend test/multi_board_esp32/test_dual_esp32_serial.py for two
real QEMU instances (skip-graceful when lcgamboa lib absent)
Verified: 1107/1107 tests pass, zero regressions, vite build OK.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Implemented a script to inject passive-component preset variants into `scripts/component-overrides.json`, including resistors, capacitors, and inductors with custom names and thumbnails.
- Added a new custom element `<wokwi-capacitor-electrolytic>` representing a polarized aluminum-can capacitor with appropriate SVG representation.
- Updated metadata generation to accommodate new component names and thumbnails for better user experience in the component picker.
- Marked submodules `qemu-lcgamboa` and `rp2040js` as dirty to reflect local changes.
- Replaced syncStoreProperty function with emitPropertyChange to decouple parts from Zustand store.
- Updated relay component mapping to ensure proper handling of coil and contact states.
- Added new test cases for half-wave rectifier and relay-controlled LED to ensure correct functionality.
- Introduced InlineComponentSVGs for schematic-style icons of various components.
- Updated submodule references for qemu-lcgamboa, rp2040js, and wokwi-elements to indicate dirty state.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
- Implement `serial-batching.test.ts` to verify the behavior of `createSerialBatcher`, ensuring it coalesces multiple appends into a single flush, preserves byte order, and groups by board.
- Create `spice-rectifier-integration.test.ts` to test the end-to-end functionality of the Half-Wave Rectifier example, covering the entire simulation pipeline from input building to circuit solving.
- Add `spice-rectifier-live-repro.test.ts` to reproduce a live-app failure scenario, tracing through each layer of the simulation to identify potential failure points.
- Introduce `spice-signal-generator-tran.test.ts` to validate the behavior of the signal generator and ensure correct analysis type switching based on circuit components.
- Establish `serialBatcher.ts` to implement a batching mechanism for USART output, reducing the frequency of store updates and preventing React's maximum update depth error.
- Decoupled electrical simulation from the simulator store, ensuring SPICE is always active for accurate circuit analysis.
- Removed feature flag for electrical simulation, simplifying the state management.
- Preloaded SPICE engine at app start to eliminate latency during the first solve.
- Added comprehensive tests for MOSFET PWM LED behavior and NPN transistor switch functionality, ensuring correct current flow and response to pin states.
- Implemented diagnostics for floating input nodes in RC low-pass filter circuits, addressing singular matrix issues in SPICE simulations.
- Introduced active semiconductor metadata registry for better component management and simulation fidelity.
- Updated Vite configuration to force re-bundling of local wokwi-elements after component additions.
fix: increase timeout for compilation requests to 180 seconds
refactor: call recalculateAllWirePositions after loading examples
chore: update subproject commit for rp2040js to dirty state
chore: update subproject commit for wokwi-elements to dirty state
Previously examples.ts pushed to exampleProjects[] after declaration, which
some bundlers can treat as dead code under aggressive tree-shaking. This
also made HMR unreliable when examples-circuits.ts changed.
Now:
const legacyExamples = [...]
export const exampleProjects = [...legacyExamples, ...circuitExamples]
Single immutable export. Guaranteed to include all 150 examples at import
time. The gallery (ExamplesGallery.tsx) and SSR prerender (entry-server.tsx)
both pick up the new circuit examples automatically.
Also adds frontend/src/__tests__/examples-circuits.test.ts with 5 assertions
to catch future regressions (all circuit ids present, no duplicates, valid
required fields, expected categories covered).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds 44 SPICE mappers, 58 custom metadata entries, and 12 visual
Web Components covering logic gates, transistors, op-amps, regulators,
sources, electromechanical parts and integrated-circuit packaging.
Fase 9 — component catalog expansion
------------------------------------
- 7 logic gates (AND/OR/NAND/NOR/XOR/XNOR + NOT) as SPICE B-sources
- 8 multi-input gates (AND/OR/NAND/NOR with 3 and 4 inputs)
- 9 transistors: 5 BJTs (incl. PNP 2N3906/BC557) + 4 MOSFETs (incl.
P-channel IRF9540/FQP27P06). NMOS refactored from Level=3 W=0.1
(hangs ngspice) to Level=1 with sane W/L
- 5 op-amps: LM358, LM741, TL072, LM324 with per-chip saturation
rails + opamp-ideal
- 4 linear regulators (7805, 7812, 7905, LM317) with dropout
- 3 batteries (9V, AA, coin-cell) with realistic ESR
- Signal generator (sine / square / DC)
- 2 Schottky diodes (1N5817, 1N5819) + photodiode (lux-driven
current source)
Fase 10 — electromechanical + ICs
---------------------------------
- Relay (SPDT): coil + L + S-switch with native hysteresis +
flyback diode, inverted-control trick for the NC contact
- Optocouplers 4N25 and PC817 (LED + CCCS with CTR=0.5 / 1.0)
- 7 74HC ICs as DIP-14 packages emitting 4 or 6 B-sources per
component (first mapper pattern emitting multiple device cards)
- 3 flip-flops (D, T, JK) — digital-sim only (edge detection is
not representable in ngspice .op)
- L293D dual H-bridge motor driver
Infrastructure
--------------
- scripts/component-overrides.json gains a _customComponents[] array
that lets new Velxio-only parts survive metadata regeneration
(previously applyOverrides() could only patch wokwi-elements
components that had already been scanned)
- scripts/generate-component-metadata.ts injects custom entries
before the patch loop
- New ComponentCategory values: 'logic', 'analog', 'electromech'
- frontend/src/components/DynamicComponent.tsx PASSIVE tracing
extended from just ['resistor','resistor-us'] to 9 two-terminal
passives with per-part pin name maps
- New CI workflow test-circuit.yml runs the sandbox on push/PR
- frontend-tests.yml regenerates metadata and fails if committed
JSON is stale
- Documented 2 new ngspice gotchas in circuit-emulation-gotchas.md:
unicode in netlist titles silently hangs the parser, and
MOSFET Level=3 + W=0.1m causes .op to hang
- 164/164 sandbox tests passing in ~9 s (was 88 pre-fase-9)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Implemented Bmp280Element as a custom web component for the BMP280 barometric sensor, including SVG representation and pin configuration.
- Created CircuitPreview component to render circuit thumbnails using SVGs of components, including support for various boards and components.
- Added a script to generate SVG files from wokwi-elements, ensuring proper formatting and structure for reliable rendering.
- Introduced a test HTML generation script to visualize component SVGs.
- Introduced I2C_SENSOR_MAP for pre-registering I2C sensors in the simulator store.
- Implemented I2C slave state machines for MPU6050, BMP280, DS1307, and DS3231 sensors in esp32_i2c_slaves.py.
- Added unit tests for I2C slave functionality covering BMP280, DS1307, DS3231, and I2CWriteSink.
- Updated the simulator store to handle I2C address resolution and sensor data management.
- Marked submodules as dirty in wokwi-libs for rp2040js and wokwi-elements.
Docker multi-arch:
- Dockerfile downloads arch-specific QEMU .so via TARGETARCH
- docker-publish.yml adds setup-qemu-action and platforms: linux/amd64,linux/arm64
- qemu-lcgamboa submodule updated (matrix build for both architectures)
LED fix:
- LEDs now require cathode wired to GND (or LOW GPIO) to light up
- Previously LEDs turned on with anode HIGH regardless of cathode connection
- Updated tests to verify anode+cathode behavior
Replace arduino-cli with ESP-IDF 4.4.7 for ESP32 compilation — Arduino-compiled
firmware crashes in QEMU (9-28 reboots) while ESP-IDF boots cleanly (0 reboots).
The new espidf_compiler translates Arduino WiFi/WebServer sketches to native
ESP-IDF C code, compiles with cmake+ninja, and merges into 4MB flash images.
Key changes:
- ESP-IDF compiler: translates WiFi.begin/WebServer to esp_wifi/esp_http_server
- ESP-IDF project template with QEMU-optimized sdkconfig (DIO, 40MHz, no WDT)
- WiFi status parser for ESP-IDF serial logs (wifi_status, ble_status events)
- IoT Gateway HTTP reverse proxy for ESP32 web servers
- WiFi/BLE auto-detection from sketch content + visual status icons
- Static IP 192.168.4.15 matching slirp DHCP first-client range
- Docker: new espidf-builder stage with ESP-IDF 4.4.7 toolchain
- 157 tests covering WiFi/BLE for both ESP32 (Xtensa) and ESP32-C3 (RISC-V)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
fix: improve session ID handling in Esp32Bridge and update WebSocket close logging
chore: mark subprojects as dirty in QEMU, RP2040, and Wokwi elements libraries
- Added board-agnostic sensor registration methods in RP2040Simulator.
- Enhanced ComplexParts to handle LEDC PWM duty updates for ESP32.
- Updated ProtocolParts to check if the simulator handles sensor protocols natively, delegating to backend if applicable.
- Introduced pre-registration of sensors in useSimulatorStore for ESP32 to prevent race conditions.
- Added tests for ESP32 DHT22 sensor registration flow, ensuring proper delegation and fallback mechanisms.
- Created tests for ESP32 Servo and Potentiometer interactions, verifying PWM subscriptions and ADC handling.
- Implemented SensorControlPanel component to allow real-time adjustments of sensor values during simulation.
- Introduced SensorUpdateRegistry for communication between UI and simulation.
- Added configuration for various sensors including sliders and buttons for user interaction.
- Enhanced existing sensor parts to support updates from SensorControlPanel.
- Created CSS styles for the SensorControlPanel layout and controls.
- Implemented a simple LED blink program in C for the ESP32-C3, targeting RV32IMC architecture.
- Created a linker script to define memory layout for the ESP32-C3.
- Added build script to compile the blink program using the riscv32-esp-elf-gcc toolchain.
- Developed Esp32C3Simulator to emulate ESP32-C3 behavior in the browser, including GPIO and UART functionality.
- Implemented utility functions to parse ESP32 flash images and handle loading of binary data.
- Included disassembly output for debugging purposes.
- Added necessary test fixtures for the blink example.
- Introduced ArduinoMega component for rendering in the simulator.
- Updated SimulatorCanvas to handle Arduino Mega board type.
- Enhanced AVRSimulator to support ATmega2560 architecture, including PWM pin mapping and port management.
- Modified PinManager to accommodate Mega's non-linear pin mapping.
- Updated boardPinMapping utility to include Mega analog pins.
- Adjusted Wokwi import/export functionality to recognize and handle Arduino Mega.
- Updated useSimulatorStore to initialize AVRSimulator with the correct board variant.
David Montero Crespo
copilot-swe-agent[bot]