MixedModeScheduler now accepts any SolverPort implementation via
solverFactory injection. The ad-hoc `NgSpiceClient` interface is
gone; the scheduler talks domain port types only.
New capabilities that fell out of the refactor:
- `resolveTran(step, stop)` — runs .tran via the solver and publishes
the steady-state (last-sample) voltage per pin. Full waveform
reachable via `getLastResult()` for downstream consumers
(CircuitSimulationService in B1+ will use this to populate
useElectricalStore.timeWaveforms).
- `getLastResult()` exposes the SolveResult so the upcoming service
layer can extract branchCurrents + waveforms without re-reading.
- `vectorsOfInterest` is computed from pinNetMap on every solve, so
the adapter only issues N parallel readVecs (where N = distinct
non-ground nets) instead of guessing.
`__setSchedulerEngineFactoryForTests` renamed to
`__setSchedulerSolverFactoryForTests`.
Tests fully migrated to FakeSolverAdapter — no more inline mock
NgSpiceClient. Test layering now mirrors production: scheduler tests
exercise port consumption, port-contract tests exercise the port
itself.
60 tests pass across mixed-mode-scheduler, solver-port-contract,
mixed-mode-bjt-switch-integration (real ngspice), pin-resolver,
pin-resolver-phase1b, connect-mixed-mode-scheduler-to-store,
connect-legacy-solver-to-mixed-mode. tsc clean.
Next: B1 — CircuitSimulationService, the layer above the scheduler
that builds netlists, picks .op vs .tran, and publishes results to
both useElectricalStore and the scheduler cache.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Wires the second half of the mixed-mode event loop on top of the
voltage cache that step 1 added.
Step 2 — loadCircuit + resolveDc:
- `loadCircuit(netlist, pinNetMap)` accepts the artifacts that
NetlistBuilder already produces, boots the engine lazily, calls
`loadNetlist`, and clears the voltage cache so stale values from a
previous circuit cannot leak through.
- `resolveDc()` runs `op` and walks the pinNetMap, calling readVec for
each non-ground net and publishVoltage for each pin. Ground pins
short-circuit to 0 V without an extra round-trip. Missing nets are
skipped quietly so a disconnected probe pin can't break the resolve.
Step 3 — onMcuPinChange:
- Issues `alter V_<board>_<pin> dc <volts>` and re-resolves. Caller
decides the volts: `state ? vcc : 0` for plain digital, but boards
with open-drain / output-impedance semantics can pass any number.
- Silent no-op when no engine has been started, so legacy paths that
fire pinChange unconditionally can't crash the simulator.
NgSpiceClient interface added and exported so unit tests can inject a
fake engine that records alter() calls and returns canned readVec
values — `__setSchedulerEngineFactoryForTests`. 7 new tests cover the
load → resolve → alter → republish loop end-to-end without booting
the real WASM worker.
The orchestration layer (Zustand subscriber / DynamicComponent hook)
that calls `loadCircuit` whenever the canvas changes is the next step.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds the runtime plumbing that Phase 1b's SPICE event loop will drive:
- `publishVoltage(componentId, pin, voltage)` updates a (componentId,
pin) → volts cache and notifies every matching subscriber.
- `getCurrentVoltage(...)` reads the cache (was previously stubbed
null).
- subscribe/publish routing exercised by 7 new unit tests.
The scheduler still does not yet drive ngspice — `start()`,
`onMcuPinChange()` are unchanged. But once Phase 1b's solve loop is in
place, calling `publishVoltage` after each `readVec` is all the wiring
needed for components to start reacting to SPICE-resolved analog
states. This is the smallest non-trivial step that keeps the
architecture honest (no test-only emitters; the same code path will be
used in production).
Tests skip booting the WASM worker — they call publishVoltage
directly, so they pass in plain Vitest with no JSDOM Worker shim.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
davidmonterocrespo24