registerProBoards() lets a hosted overlay ship boards outside the OSS tree as
data-only definitions: registration patches the exported BoardKind maps
(labels / FQBN / MicroPython) so every existing read site keeps working, and
the sites a map can't cover consult the registry — canvas render (custom
element or overlay render fn), BOARD_SIZE, pin-name mapping, picker list +
descriptions + tag, ESP32 family routing, in-browser simulator construction
and firmware load (structural ProBoardSimulator contract, duck-typed PIO
attach/detach), built-in bridge sensors, and a CS-gated built-in microSD
(sdCsPin -> sd_card.cs_pin worker config). Esp32Bridge additionally gains the
esp32-c6 machine type + TX pin (public chip knowledge — the C6 compile path
already ships) and a generic sendKey() for built-in matrix keyboards.
registerProExamples() appends gallery examples at runtime; the board ONLINE
ads recompute at render so registration hides them. OSS behavior without an
overlay is unchanged — the registry is dead code, same as the other seams.
Components that only exist in the hosted editor now advertise themselves in
the picker exactly like the online-only boards do: ONLINE_ONLY_COMPONENT_ADS
(same module as the board ads) renders an ONLINE-badged card that links to
velxio.com, auto-hidden in any build whose ComponentRegistry has the real
component (the hosted overlay merges it in — no per-build switches). First
entries: the M5Stack Chain RGB/Mono 8x8 matrices. componentDocs gains
registerComponentDoc(id, raw) so an overlay can supply the hover datasheet
for components it injects at runtime.
Generic platform work ported from the internal line:
- Esp32BridgeFactory seam + rebuildEsp32Bridge + sync-I2C seam: a
substitute simulation bridge (e.g. the hosted editor's in-browser JS
emulators) can be installed without touching OSS code
- Component datasheets: hover popover (ComponentInfoPanel) + markdown
docs for common parts
- Per-chip S3/C3 basics examples for the gallery
- .gitignore: never allow pro emulator mask ROMs into the OSS repo
New: online-only board showcase. Boards implemented by the hosted editor
(ESP32-C6, M5Stack Core, Cardputer ADV, Pimoroni RP2350 family) appear
in the picker as advertisement cards with an ONLINE badge linking to
velxio.com, where they are free to use. Ads auto-hide in any build that
registers the real BoardKind.
The registry's Pi Zero/1/2/3/4/5 component entries rendered the live
velxio-raspberry-pi-* element clipped to a sliver and carried no PRO
marker. Reuse the board illustrations keyed by tagName (Zero/1/2
intentionally share the Pi 3 art) and show the shared gold PRO pill on
any component whose id is a pro board kind (Pi Linux family + STM32).
The Pi 4/5 cards instantiated their live custom element at natural size
with a CSS scale; the transform keeps the unscaled layout box, so the
100px thumbnail clipped the board to a narrow vertical sliver. Use the
existing board illustration PNGs with objectFit contain, same as Pi 3.
The PRO badge on gated boards grows to a readable pill with a drop
shadow.
Two stacking bugs:
1. Pin overlays used a global z-index 30 while component bodies sit at
z 0-5, all in .canvas-world's single stacking context — so a covered
component's pins painted on top of whatever covered it (arduino pins
showing through a breadboard). Each component/board group is now a
zero-size positioned wrapper that forms its own stacking context
(boards z 0, components z 1, selected z 2): pins stay above their own
body but are hidden together with it. .components-area becomes
pointer-events: none so board pins/drag overlays (now trapped at z 0)
keep receiving clicks through it; component groups re-enable their own.
2. The Add Component / board picker overlays (z 1000/2000) rendered
behind the pro AI chat panel (z 8000). Both now portal to <body> at
z 9000.
Verified in-app: board drag, component drag, wire creation from board
pin to LED, covered pins hidden (0/14 leak), covering component's pins
still clickable.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Adds `velxio-ssd1306-i2c-4pin`, a native 4-pin SSD1306 OLED module
(GND/VCC/SCL/SDA) — the cheap 0.96" I2C board most beginners actually have,
matching Wokwi's board-ssd1306. The 8-pin `wokwi-ssd1306` breakout stays; this
is the distinct 4-pin part (issue #215). Same SSD1306Core render pipeline
(imageData/redraw) so the display paints identically; I2C-only, address via the
i2cAddress property (default 0x3C). Styled after the existing 8-pin element
(blue PCB, dark screen, corner holes, star).
Ships four "SSD1306 OLED (4-pin I2C)" gallery examples wiring it over I2C on
Arduino Uno (A4/A5), ESP32 (21/22), Raspberry Pi Pico (GP4/GP5) and STM32 Blue
Pill (PB7/PB6).
Adds stm32-f4-discovery, stm32-olimex-h405, stm32-netduino-plus2, stm32-netduino2, stm32-blackpill-f401 and stm32-bluepill-f103cb, mapped to existing qemu-lcgamboa machines (netduinoplus2, olimex-stm32-h405, netduino2, stm32vldiscovery). A generic inline board renderer (no SVG) draws the Discovery/Olimex/Netduino boards from a header pin layout; the Pill variants reuse the Blue/Black Pill SVGs. Per-board onboard-LED pin and polarity via STM32_LED. One blink+serial example per board.
tsc --noEmit clean; all new FQBN pnum variants present in STM32 core 2.12.0; worker smoke tests pass for the new machines.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
STM32 emulation (open-core, runs via libqemu-arm in the backend worker):
- backend: stm32_lib_manager + stm32_worker (GPIO, USART, I2C/SPI device models
reusing the ESP32 slaves, live sensor updates), arduino_cli STM32 branch,
start_stm32 simulation route.
- frontend: Stm32Bridge + Stm32BluePill(/BlackPill) web components (Wokwi SVGs),
board kinds, Interconnect/boardPinMapping/boardProtocols wiring, example
projects (blink, serial, I2C BMP280/MPU6050/DS1307/SSD1306/weather, 7-seg,
RGB, button, switch, stepper, cross-board interconnect).
- Raspberry Pi 4/5 board elements + thumbnails.
Pro board gating (generic OSS->Pro seam; entitlement logic lives in the overlay):
- lib/proBoardGate.ts: isProBoardKind (STM32 + every QEMU Raspberry Pi),
installBoardGateImpl/boardGateDecision, triggerProUpgradePrompt.
- PRO badge on those boards in the component picker; gate at the picker add +
the run backstop (startBoard).
- backend/app/services/board_access.py: server-side enforcement seam for the
simulation WebSocket; STM32/Pi unavailable -> Pro-framed message.
- desktop: generic QemuDownloadPrompt + Stm32QemuPrompt (download-behind-license,
mirrors the ESP32 prompt).
- .gitignore: never ship libqemu-* binaries in the public image.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The BoardKind type and the QEMU backend already supported
raspberry-pi-4 (Cortex-A72) and raspberry-pi-5 (Cortex-A76) by reusing
the Pi 3 arm64 image set, but the frontend had no way to actually
select either: the board picker, the canvas renderer, the serial
monitor, the oscilloscope channel list, and the editor toolbar all
hard-coded "raspberry-pi-3" as the only Pi entry. ComponentRegistry
even registered Pi 4 / Pi 5 metadata pointing at the velxio-raspberry-pi-3
custom-element tag — a placeholder that meant both boards rendered as
a Pi 3 in the picker thumbnail and on the canvas.
Add dedicated boards top-to-bottom:
* `RaspberryPi4Element.ts` / `RaspberryPi5Element.ts` — Velxio-style
schematic SVG (authored from scratch, not traced). Pi 4 is the
green PCB with BCM2711 SoC, 4× USB-A, USB-C power, dual µHDMI;
Pi 5 is the darker green PCB with BCM2712 + RP1 southbridge,
2.5 GbE, USB-C 5V/5A, PCIe FFC connector, dedicated power
button. Both carry a small "velxio" mark in the corner.
* `pi40PinHeader.ts` — shared `buildPi40PinHeader()` helper that
returns the 40-pin BCM layout. Every Pi from the 1B+ onwards
uses the same physical pin positions and same BCM GPIO
assignment, so Pi 3 / Pi 4 / Pi 5 elements all consume this
helper and example wires drawn against one model transfer to
the others without re-routing.
* React wrappers `RaspberryPi4.tsx` / `RaspberryPi5.tsx` render the
custom elements at absolute positions (mirrors how
RaspberryPi3.tsx handles the Pi 3 illustration).
* Wire-up across the editor surface:
- BoardOnCanvas: BOARD_SIZE entry + switch case.
- BoardPickerModal: description, icon, kinds list.
- ComponentPickerModal: thumbnails now instantiate the dedicated
custom element (was velxio-raspberry-pi-3 fallback).
- SerialMonitor / EditorToolbar: pill labels, icons, colours.
- Oscilloscope: GPIO channel list (28 BCM pins).
- SimulatorCanvas: remote-boards filter for run/stop sync.
- SPICE boardPinGroups: same 5V / 3V3 / GND as Pi 3.
- boardPinToNumber: accepts physical pin numbers ("1"-"40"),
BCM names ("GPIO14") and power labels for any Pi 3/4/5 id.
- ComponentRegistry: dedicated tagNames + per-board thumbnails
(green for Pi 4, darker green for Pi 5).
* EditorToolbar's Pi 3 special cases (Linux/Python compile path,
Run/Stop routing) now use `isPiBoardKind()` so Pi 4 and Pi 5
inherit the same behaviour automatically, and any future Pi
family member (Zero / 1 / 2) lands in the right code paths the
moment its backend boots.
QEMU backend was already wired (qemu_manager.py:71/82 + manifest entry
'raspberry-pi-3-virt' shared across arm64 Pis), so this commit makes
both boards selectable end-to-end without any backend follow-up.
ComponentPickerModal — the "Add Component" dialog:
- Header (title + close button), search input placeholder + clear,
category tabs (All Components / Boards), loading + empty-state
copy, "Clear filters" button.
LibraryManagerModal — the Arduino library browser:
- Window title, Search / Installed tabs, filter input placeholder.
- Search-tab states: searching-for-query, generic loading, no
results (with optional query interpolation).
- Per-library row: "by {{author}}" caption, Install / Installing /
Uninstall / Uninstalling button labels.
- Installed-tab empty-state with the prompt to use the Search tab.
Brand and product names left untouched ("LIBRARY MANAGER" stays
all-caps in English; the localised variants follow each language's
convention for product UI titles). Hand-translated for all 9
locales.
InstallLibrariesModal still pending — it's the auto-install
prompt that fires when an example needs libraries; smaller scope
but lives in the same area.
Three small additions so private overlays can add components gated behind
a paid subscription without forking the picker:
- types/component-metadata.ts: optional pro_only?: boolean field on
ComponentMetadata. Self-hosters never set it; picker behaves identically.
- services/componentRegistry.ts: new mergeComponents() public method.
Pro overlay calls this after the default registry has loaded to splice
in extra components (replacing any with the same id).
- components/ComponentPickerModal.tsx: when a pro_only component is
clicked, the picker first calls window.__velxio_pro_gate__(component)
if defined. If the gate returns true, the click is consumed (overlay
shows an upgrade modal). If absent or returns false, the click passes
through to onSelectComponent as normal.
Net upstream change: ~25 lines, all backwards-compatible. OSS image
behaves exactly as before since no overlay sets pro_only or installs
the gate.
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Implemented a script to inject passive-component preset variants into `scripts/component-overrides.json`, including resistors, capacitors, and inductors with custom names and thumbnails.
- Added a new custom element `<wokwi-capacitor-electrolytic>` representing a polarized aluminum-can capacitor with appropriate SVG representation.
- Updated metadata generation to accommodate new component names and thumbnails for better user experience in the component picker.
- Marked submodules `qemu-lcgamboa` and `rp2040js` as dirty to reflect local changes.
- Replaced syncStoreProperty function with emitPropertyChange to decouple parts from Zustand store.
- Updated relay component mapping to ensure proper handling of coil and contact states.
- Added new test cases for half-wave rectifier and relay-controlled LED to ensure correct functionality.
- Introduced InlineComponentSVGs for schematic-style icons of various components.
- Updated submodule references for qemu-lcgamboa, rp2040js, and wokwi-elements to indicate dirty state.
- Implemented ATtiny85 visual component with DIP-8 layout and built-in LED.
- Added Raspberry Pi Pico W web component using official SVG and pin mapping.
- Created RISC-V Board visual component with SOP-20 style and built-in LED.
- Introduced RiscVCore class for minimal RV32I ISA interpreter with memory model.
- Developed RiscVSimulator class for CH32V003-compatible simulator with UART and GPIO support.
- Updated subproject commits for qemu-lcgamboa, rp2040js, and wokwi-elements to dirty state.
- Created a new TypeScript file for component metadata types defining structure for dynamically loaded components.
- Implemented a metadata generator script that scans the wokwi-elements repository to extract component information, including properties and categories.
- Added package.json and package-lock.json for dependency management, including TypeScript and related tools.
- Introduced a new file to log ping statistics for testing purposes.
David Montero Crespo