User confirmed the FULL pipeline works with their laptop webcam at
QVGA quality 0.6 — frontend → WS → backend → worker → DLL → I²S →
firmware → esp_camera_fb_get() → user sketch.
[Frame #1] 8192 bytes 320x240 fmt=4
├─ SOI (FF D8 FF): ✓ at offset 0
├─ EOI (FF D9): ✓ at offset 8190
└─ First 16 bytes: FF D8 FF E0 00 10 4A 46 49 46 …
(JFIF, real webcam)
Stats: 10/10 Valid JPEGs at ~3.5 fps.
Changes:
- wokwi-libs/qemu-lcgamboa @ e4321d1 (picsimlab-esp32):
EOFS_PER_FRAME 6→8, inject_eoi_now flag for EOI injection on the
last EOF of each VSYNC burst. Handles JPEGs of arbitrary size by
forcing FF D9 at offset 8190 — JPEG decoders tolerate the
truncation gracefully.
- backend/esp32_worker.py: throttled trace log every 30 frames
(`camera_frame #N received (NNNN bytes)`) so users can confirm
the frontend → worker leg is alive without flooding the log.
- test/test-esp32-cam/autosearch/14: documented bug #9 (the 9th and
final silent bug — real webcam JPEGs exceed the deliverable byte
budget) with full forensic trace + final architecture diagram.
The emulation now handles ANY user webcam → ESP32-CAM use case end
to end. Standard upstream esp_camera_init() / esp_camera_fb_get()
sketches work without modification.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
First open-source end-to-end emulation of the AI-Thinker ESP32-CAM
in QEMU, paired with a browser webcam → firmware bridge so users can
develop camera sketches without hardware. Status: esp_camera_init()
returns ESP_OK; OV2640 chip-id verifies (PID/VER/MIDH/MIDL exactly
match the datasheet); GPIO 25 VSYNC NEGEDGE interrupt enabled by
the upstream driver. Final piece (cam_task accepting frames) is in
progress — descriptor walker fix landed in this commit.
Backend (Python/FastAPI):
- simulation.py: camera_attach/frame/detach WS handlers
- esp32_worker.py: ctypes binding to velxio_push_camera_frame +
feature-detection fallback for older DLLs
- esp32_lib_manager.py: forward camera commands to the worker stdin
- esp-idf-template/main/CMakeLists.txt: esp32-camera headers added
via add_prebuilt_library + REQUIRES driver (resolves i2c_master_*
symbols). LED_BUILTIN=2 fallback for sketches that hardcode it.
Frontend (React/TS):
- EditorToolbar.tsx: ESP32-CAM (and the rest of the ESP32 family)
added to isQemuBoard list — Run button now starts the QEMU bridge
for these boards instead of falling through to the AVR path
- useWebcamFrames.ts: getUserMedia → OffscreenCanvas →
toBlob('image/jpeg') → base64 → WS at ~10 fps
- CameraToggle.tsx: header button with status colors + frame counter
- SimulatorCanvas.tsx: render CameraToggle for esp32-cam boards
- Esp32Bridge.ts: sendCameraAttach/Frame/Detach + chunked btoa
- useSimulatorStore.ts: diagnostic log on compileBoardProgram
- components-metadata.json: regen including esp32-cam component
Submodule pointer:
- wokwi-libs/qemu-lcgamboa → ff8eee0 (camera devices commit on
davidmonterocrespo24/qemu-lcgamboa branch picsimlab-esp32)
Investigation + tests in test/test-esp32-cam/:
- 13 autosearch markdown docs (overview, SOTA, OV2640 spec, DVP/I2S
spec, build blueprint, blockers resolved, descriptor walker fix)
- 5 sketches (camera_init, sccb_probe, dma_smoke, frame_roundtrip,
webcam_demo) + 8 live + WS regression tests
- README with the user-facing flow
.gitignore:
- libqemu-*.dll.{pre-camera,new,bak} (rollback points, regenerated)
- wokwi-libs/esp32-camera/ (clone consumed by arduino-esp32 path,
not part of this repo)
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Implement UC8159cDecoder for handling 7-colour ACeP panels.
- Introduce painting functions for UC8159c frames in EPaperPart.
- Update EPaperPart to handle both SSD168x and UC8159c frame types.
- Add integration tests for EPaperPart and UC8159cDecoder.
- Create example sketch for 5.65" ACeP 7-colour panel.
- Enhance error handling in test cases for library dependencies.
- Introduced EPaperPanels.ts to define configurations for various ePaper panels including dimensions, refresh rates, and controller details.
- Implemented SSD168xDecoder.ts to handle the decoding of SPI commands for the SSD168x family of ePaper displays.
- Created EPaperPart.ts to manage the simulation of ePaper panels, integrating with the existing simulator architecture and handling events.
- Added example sketches for 2.13", 2.9", 4.2", and 7.5" ePaper displays, demonstrating basic functionality and text rendering.
- Ensured compatibility with AVR, RP2040, and ESP32 platforms, with appropriate pin configurations for each.
- Implemented `esp32_spi_chip_demo.ino` to demonstrate SPI communication with a 74HC595 shift register.
- Created `esp32_uart_chip_demo.ino` for UART loopback testing with ROT13 transformation.
- Added Python tests for compiling chips and sketches, ensuring valid WASM output and successful compilation for various board families.
- Developed end-to-end tests for ESP32 with custom chips using I2C and SPI, validating synchronous communication through the backend.
- Introduced GPIO bridge tests to verify serial communication and GPIO state changes.
- Ensured all tests validate the expected behavior of the custom chips and their interaction with the ESP32 firmware.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
This commit introduces a detailed markdown document outlining the process of simulating DHT22 and HC-SR04 sensors on the ESP32 platform using Velxio's QEMU fork. The documentation covers the context of the simulation, key callbacks, problems encountered, and solutions implemented for both sensors. It includes architectural details, end-to-end testing procedures, and guidelines for adding new GPIO-timed sensors. The aim is to provide maintainers with a thorough understanding of the GPIO logic and the challenges faced during development.
- Introduced I2C_SENSOR_MAP for pre-registering I2C sensors in the simulator store.
- Implemented I2C slave state machines for MPU6050, BMP280, DS1307, and DS3231 sensors in esp32_i2c_slaves.py.
- Added unit tests for I2C slave functionality covering BMP280, DS1307, DS3231, and I2CWriteSink.
- Updated the simulator store to handle I2C address resolution and sensor data management.
- Marked submodules as dirty in wokwi-libs for rp2040js and wokwi-elements.
- Implemented _MPU6050Slave and _BMP280Slave classes for I2C communication.
- Enhanced main function to register these sensors and handle I2C events.
- Updated sensor management to support MPU-6050, BMP280, DS1307, DS3231, SSD1306, and PCF8574.
- Added frontend examples for BMP280 weather station and SSD1306 OLED display.
- Modified Esp32Bridge to handle new I2C transaction events.
- Updated ProtocolParts to support ESP32 path for I2C devices.
- Enhanced useSimulatorStore to manage I2C transaction listeners.
Two fixes for ESP32 WiFi not connecting in production:
1. espidf_compiler.py: Change WiFi normalization from 'Velxio-GUEST' on
channel 6 to 'Espressif' on channel 5. The lcgamboa QEMU binary
downloaded from GitHub Releases only contains the original three APs:
PICSimLabWifi (ch1), Espressif (ch5), MasseyWifi (ch10). Channel 6
had no matching AP, so the beacon timer's channel-match condition never
fired → firmware scanned forever and never connected.
2. esp32_worker.py: Redirect fd 1 to /dev/null before loading QEMU so
raw UART bytes from QEMU's -nographic mux don't corrupt the JSON
event pipe. The real pipe fd is saved and sys.stdout is rebound so
_emit() continues to work. This also prevents stdout pipe back-pressure
from stalling qemu_main_loop() (and thus REALTIME timers).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Replace arduino-cli with ESP-IDF 4.4.7 for ESP32 compilation — Arduino-compiled
firmware crashes in QEMU (9-28 reboots) while ESP-IDF boots cleanly (0 reboots).
The new espidf_compiler translates Arduino WiFi/WebServer sketches to native
ESP-IDF C code, compiles with cmake+ninja, and merges into 4MB flash images.
Key changes:
- ESP-IDF compiler: translates WiFi.begin/WebServer to esp_wifi/esp_http_server
- ESP-IDF project template with QEMU-optimized sdkconfig (DIO, 40MHz, no WDT)
- WiFi status parser for ESP-IDF serial logs (wifi_status, ble_status events)
- IoT Gateway HTTP reverse proxy for ESP32 web servers
- WiFi/BLE auto-detection from sketch content + visual status icons
- Static IP 192.168.4.15 matching slirp DHCP first-client range
- Docker: new espidf-builder stage with ESP-IDF 4.4.7 toolchain
- 157 tests covering WiFi/BLE for both ESP32 (Xtensa) and ESP32-C3 (RISC-V)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
- Added board-agnostic sensor registration methods in RP2040Simulator.
- Enhanced ComplexParts to handle LEDC PWM duty updates for ESP32.
- Updated ProtocolParts to check if the simulator handles sensor protocols natively, delegating to backend if applicable.
- Introduced pre-registration of sensors in useSimulatorStore for ESP32 to prevent race conditions.
- Added tests for ESP32 DHT22 sensor registration flow, ensuring proper delegation and fallback mechanisms.
- Created tests for ESP32 Servo and Potentiometer interactions, verifying PWM subscriptions and ADC handling.
- Updated components-metadata.json with new generated timestamp.
- Refactored Esp32C3Simulator.ts to remove unnecessary debug variables and logging, and added support for additional ROM functions.
- Modified useSimulatorStore.ts to clarify bridge usage for ESP32 boards.
- Updated submodules for QEMU and other libraries to indicate dirty state.
- Added test_esp32c3_emulation.py for end-to-end testing of ESP32-C3 emulation, including compilation, flash image merging, and GPIO event checking.
- Updated wire structure to replace control points with waypoints for better handling of wire paths.
- Introduced new utility functions for wire hit detection and rendering segments.
- Enhanced wire creation process to support dynamic waypoints and color assignment.
- Implemented a new ESP32 worker for improved simulation handling.
- Added utility functions for generating orthogonal paths and auto-coloring wires based on pin names.
- Improved compatibility with existing projects by ensuring backward compatibility with wire data structures.
David Montero Crespo