The ILI9341 part simulation only hooked AVR's SPI peripheral. For
ESP32 the simulator is Esp32BridgeShim (no .spi member), so
attachEvents bailed early and the LCD stayed black even though the
firmware was driving SPI traffic correctly.
The QEMU worker already emits per-byte spi_event WS messages
(see backend/app/services/esp32_worker.py::_on_spi_event), and the
Esp32Bridge already had an onSpiEvent hook — but the bridge was
reading msg.data.data (a non-existent field) instead of decoding
the worker's {bus, event, response} format. Fixed.
Two changes:
1. Esp32Bridge.ts: decode the spi_event payload correctly. The
worker encodes byte transfers as `mosi << 8` (op = low byte = 0x00)
and CS-line changes as `((cs<<1)|level) << 8 | 0x01` (op == 0x01).
Added onSpiByte (per-byte) and onSpiCsChange callbacks alongside
the existing onSpiEvent for backwards compat.
2. ComplexParts.ts ili9341Simulation: detect Esp32BridgeShim via
`getBridge()` duck-type check. When present, subscribe to
bridge.onSpiByte and feed bytes into the same processCommand /
processData pipeline used by the AVR path. DC tracking via
pinManager.onPinChange already works for ESP32 because the bridge
fires triggerPinChange on every gpio_change WS event.
Verified end-to-end: ESP32-CAM + ILI9341 example in the gallery now
renders the live webcam preview to the simulated TFT (160×120 RGB565
centered in the 320×240 panel) at ~3-4 fps.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Replaced syncStoreProperty function with emitPropertyChange to decouple parts from Zustand store.
- Updated relay component mapping to ensure proper handling of coil and contact states.
- Added new test cases for half-wave rectifier and relay-controlled LED to ensure correct functionality.
- Introduced InlineComponentSVGs for schematic-style icons of various components.
- Updated submodule references for qemu-lcgamboa, rp2040js, and wokwi-elements to indicate dirty state.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
- Added board-agnostic sensor registration methods in RP2040Simulator.
- Enhanced ComplexParts to handle LEDC PWM duty updates for ESP32.
- Updated ProtocolParts to check if the simulator handles sensor protocols natively, delegating to backend if applicable.
- Introduced pre-registration of sensors in useSimulatorStore for ESP32 to prevent race conditions.
- Added tests for ESP32 DHT22 sensor registration flow, ensuring proper delegation and fallback mechanisms.
- Created tests for ESP32 Servo and Potentiometer interactions, verifying PWM subscriptions and ADC handling.
- Implemented SensorControlPanel component to allow real-time adjustments of sensor values during simulation.
- Introduced SensorUpdateRegistry for communication between UI and simulation.
- Added configuration for various sensors including sliders and buttons for user interaction.
- Enhanced existing sensor parts to support updates from SensorControlPanel.
- Created CSS styles for the SensorControlPanel layout and controls.
- Introduced new SensorParts.ts to handle various sensors including tilt switch, temperature sensor, gas sensor, flame sensor, heart beat sensor, and sound sensors.
- Implemented stepper motor simulation with full-step decoding.
- Added utility functions for ADC voltage injection in partUtils.ts, supporting both AVR and RP2040.
- Updated BasicParts.ts to avoid re-registering the 7-segment display.
- Enhanced ComplexParts.ts by removing unused ADC helper functions.
- Updated index.ts to include the new SensorParts module.
- Updated Vite environment definitions to include new custom elements for sensors and stepper motors.
- Simplified serial data handling in `useSimulatorStore` for both AVR and RP2040 simulators.
- Introduced `boardPinMapping.ts` to map wokwi-element pin names to simulator GPIO/pin numbers for Arduino Uno and Nano RP2040.
- Added `compilationLogger.ts` to parse compile results into structured log entries for better console output.
- Added PWM duty cycle tracking and callback registration to PinManager.
- Introduced methods for handling analog voltage injection and callbacks.
- Updated updatePort method to notify digital pin listeners.
- Improved listener management with clearAllListeners method.
feat: Expand BasicParts with new components
- Registered new components: 6mm Pushbutton, Slide Switch, DIP Switch 8, LED Bar Graph, and 7-Segment Display.
- Implemented event handling for each component to interact with the AVR simulator.
feat: Introduce ComplexParts with advanced components
- Added RGB LED with PWM support for color mixing.
- Implemented Potentiometer and Slide Potentiometer for analog input.
- Created Photoresistor Sensor to simulate light levels.
- Developed Analog Joystick for two-axis control and button press.
- Added Servo motor simulation with pulse width modulation.
- Implemented Buzzer using Web Audio API for sound generation.
- Created LCD 1602 and 2004 simulations with command/data processing.
- Updated components-metadata.json with new generation timestamp.
- Added event handling for button presses and releases in DynamicComponent.
- Improved ExamplesGallery with new styles for placeholders and previews.
- Introduced LCD 20x4 display example with corresponding code and wiring.
- Enhanced SimulatorCanvas to subscribe components to pin changes.
- Implemented PartSimulationRegistry for managing component simulation logic.
- Added basic and complex parts simulation including pushbuttons, LEDs, and LCDs.
- Created utility functions for capturing canvas previews and generating SVG previews for example projects.
David Montero Crespo