Bumps wokwi-libs/qemu-lcgamboa pointer to a96c851 (picsimlab-esp32
branch) which contains:
- pack_one_pixel fix (was discarding half the JPEG data)
- split vsync_kick_timer / eof_timer (resolves chicken-and-egg
between VSYNC and rx_start)
- multi-descriptor walker (already in previous commit, recap)
Adds test/test-esp32-cam/autosearch/13_three_remaining_bugs.md
with line refs to upstream esp32-camera and a TODO list for the
next rebuild + verification cycle.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
First open-source end-to-end emulation of the AI-Thinker ESP32-CAM
in QEMU, paired with a browser webcam → firmware bridge so users can
develop camera sketches without hardware. Status: esp_camera_init()
returns ESP_OK; OV2640 chip-id verifies (PID/VER/MIDH/MIDL exactly
match the datasheet); GPIO 25 VSYNC NEGEDGE interrupt enabled by
the upstream driver. Final piece (cam_task accepting frames) is in
progress — descriptor walker fix landed in this commit.
Backend (Python/FastAPI):
- simulation.py: camera_attach/frame/detach WS handlers
- esp32_worker.py: ctypes binding to velxio_push_camera_frame +
feature-detection fallback for older DLLs
- esp32_lib_manager.py: forward camera commands to the worker stdin
- esp-idf-template/main/CMakeLists.txt: esp32-camera headers added
via add_prebuilt_library + REQUIRES driver (resolves i2c_master_*
symbols). LED_BUILTIN=2 fallback for sketches that hardcode it.
Frontend (React/TS):
- EditorToolbar.tsx: ESP32-CAM (and the rest of the ESP32 family)
added to isQemuBoard list — Run button now starts the QEMU bridge
for these boards instead of falling through to the AVR path
- useWebcamFrames.ts: getUserMedia → OffscreenCanvas →
toBlob('image/jpeg') → base64 → WS at ~10 fps
- CameraToggle.tsx: header button with status colors + frame counter
- SimulatorCanvas.tsx: render CameraToggle for esp32-cam boards
- Esp32Bridge.ts: sendCameraAttach/Frame/Detach + chunked btoa
- useSimulatorStore.ts: diagnostic log on compileBoardProgram
- components-metadata.json: regen including esp32-cam component
Submodule pointer:
- wokwi-libs/qemu-lcgamboa → ff8eee0 (camera devices commit on
davidmonterocrespo24/qemu-lcgamboa branch picsimlab-esp32)
Investigation + tests in test/test-esp32-cam/:
- 13 autosearch markdown docs (overview, SOTA, OV2640 spec, DVP/I2S
spec, build blueprint, blockers resolved, descriptor walker fix)
- 5 sketches (camera_init, sccb_probe, dma_smoke, frame_roundtrip,
webcam_demo) + 8 live + WS regression tests
- README with the user-facing flow
.gitignore:
- libqemu-*.dll.{pre-camera,new,bak} (rollback points, regenerated)
- wokwi-libs/esp32-camera/ (clone consumed by arduino-esp32 path,
not part of this repo)
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Update esp32_lib_manager.py to dynamically set library extensions based on the platform (Linux, Windows, macOS).
- Update submodule references for qemu-lcgamboa and wokwi-elements.
- Add documentation on ESP32 Arduino runtime crashes related to cache disable during WiFi/BT initialization.
- Introduce regression tests for the ESP32-CAM blink issue, ensuring the user sketch matches the reported problem.
- Implement an IRAM-safe blink sketch to confirm the regression is due to the Arduino runtime.
- Create a comprehensive test suite to cover various layers of the simulation and compilation process.
- Introduced SVG layout dimensions for Phase 1 (B/W mono) and Phase 2 (colour) ePaper panels, detailing active areas, bezels, and pin layouts.
- Developed a phased emulation plan outlining the architecture and deliverables for different panel types, including SSD168x and UC81xx.
- Created a canonical "Hello, World!" sketch for the 1.54" ePaper panel, ensuring compatibility across ESP32, Raspberry Pi Pico, and Arduino Uno.
- Implemented a pure Python SSD168x decoder to validate SPI command sets and framebuffers against specifications.
- Added tests for compiling the hello-world sketch across supported boards and for the SSD168x protocol to ensure correct framebuffer behavior.
- Implemented handshake tests to validate initial bus state and register responses.
- Created end-to-end tests for Pico W LED blinking using MicroPython firmware.
- Added SDPCM framing tests to ensure proper encoding and decoding of control frames.
- Developed IOCTL tests to verify command responses and state changes in the emulator.
- Established a full lifecycle test for WiFi operations, including scanning, connecting, and packet handling.
- Introduced TypeScript configuration for test files to ensure compatibility and strict type checking.
https://github.com/kritishmohapatra/100_Days_100_IoT_Projects
- Introduced `_lib.py` containing shared validators for board support and static source analysis for MicroPython projects.
- Added `conftest.py` to configure pytest for the test suite, simplifying import paths.
- Created `NOT_SUPPORTED.md` files for two projects indicating they cannot be emulated in Velxio due to lack of source code.
- Implemented unit tests for the unsupported projects to verify the presence of the NOT_SUPPORTED marker and source preservation.
Docker multi-arch:
- Dockerfile downloads arch-specific QEMU .so via TARGETARCH
- docker-publish.yml adds setup-qemu-action and platforms: linux/amd64,linux/arm64
- qemu-lcgamboa submodule updated (matrix build for both architectures)
LED fix:
- LEDs now require cathode wired to GND (or LOW GPIO) to light up
- Previously LEDs turned on with anode HIGH regardless of cathode connection
- Updated tests to verify anode+cathode behavior
- Added detailed logging for GPIO changes, system events, and errors in simulation websocket.
- Improved ESP32 firmware handling by merging individual binaries into a single 4MB flash image.
- Updated ESP32 bridge to handle serial output and GPIO changes with appropriate logging.
- Introduced integration test for ESP32 emulation, covering compilation, WebSocket connection, and event handling.
- Enhanced examples to include ESP32 projects and updated the examples gallery to reflect new board types.
- Refactored simulator store to manage ESP32 bridge and simulator instances more effectively.
- Updated requirements to include esptool for ESP32 firmware management.
- Added SimulatorCanvas component for rendering the simulator interface.
- Integrated Wokwi components (Arduino, LED, Resistor, Pushbutton, Potentiometer) into the simulator.
- Created PinManager to handle pin state changes and notifications.
- Developed AVRSimulator class for emulating Arduino Uno functionality.
- Implemented hex file loading and compilation service.
- Added CSS styles for the simulator interface.
- Established Zustand stores for managing editor and simulator states.
- Created utility functions for parsing Intel HEX format.
- Set up Vite configuration for the frontend project.
- Added batch scripts for starting backend and frontend servers, and updating Wokwi libraries.
David Montero Crespo