New optional `featured` metadata flag: ComponentRegistry stable-sorts
featured components to the front after loading (and indexes categories
from the sorted list, so per-category views keep the same order). The
two breadboards are marked featured in component-overrides.json — they
are everyday parts and now open the component grid instead of sitting
at the bottom below every diode.
Two velxio-native passive parts, rendered as web components with
programmatic SVG + precomputed pinInfo (velxio-breadboard 830 holes,
velxio-breadboard-mini 170). Pin names follow the Wokwi convention
(holes `18t.d` / `17b.i`, rails `tp/tn/bp/bn.N`) and the metadata ids
are `breadboard` / `breadboard-mini`, so wokwi diagram.json zips
import/export with no aliasing.
Internal connectivity (5-hole column strips, full-length power rails)
is centralized in utils/breadboardNets.ts and wired into every net
consumer:
- NetlistBuilder: unionBreadboardGroups joins wired holes per group at
the union-find level in buildNetlist, buildWireNetMap and
buildBoardPinNetMap — SPICE, the circuit verifier and the voltage
overlay all see one net per strip/rail with no extra cards.
- DynamicComponent.traceDetailed: the digital trace hops through every
other wired hole of the entered group, so parts wired through a
breadboard still resolve their board pin (2-terminal
PASSIVE_PIN_PAIRS could not express N-hole groups).
Verified end-to-end in the app: Uno pin 8 -> full-board column ->
resistor -> mini-board column -> LED -> ground rail -> GND lights the
LED, and the HUD shows the 3 collapsed SPICE nets. 8 new unit tests
(breadboard-nets.test.ts); netlist-builder + circuit-verifier suites
stay green.
Adds `velxio-ssd1306-i2c-4pin`, a native 4-pin SSD1306 OLED module
(GND/VCC/SCL/SDA) — the cheap 0.96" I2C board most beginners actually have,
matching Wokwi's board-ssd1306. The 8-pin `wokwi-ssd1306` breakout stays; this
is the distinct 4-pin part (issue #215). Same SSD1306Core render pipeline
(imageData/redraw) so the display paints identically; I2C-only, address via the
i2cAddress property (default 0x3C). Styled after the existing 8-pin element
(blue PCB, dark screen, corner holes, star).
Ships four "SSD1306 OLED (4-pin I2C)" gallery examples wiring it over I2C on
Arduino Uno (A4/A5), ESP32 (21/22), Raspberry Pi Pico (GP4/GP5) and STM32 Blue
Pill (PB7/PB6).
The SSD1306 was three picker entries — a generic `ssd1306` with a protocol
selector plus `ssd1306-i2c` / `ssd1306-spi` shortcuts (issue #101) — all the
same 8-pin wokwi-ssd1306 element. That is confusing for one physical module
(issue #215). Wokwi ships a single I2C-only part; this goes one better: a
single part that auto-detects the protocol from the wiring, like a real
breadboard — CS or DC wired to a GPIO means SPI, otherwise I2C. No protocol
switch to set, just wire it up.
Works on every board with an I2C/SPI bus (AVR, RP2040, ESP32 Xtensa, STM32).
The ssd1306-i2c / ssd1306-spi ids stay as backward-compat simulation aliases
for projects saved before the merge, but are removed from the picker. Adds an
i2cAddress property (0x3c/0x3d) matching the real module and Wokwi.
Note: ESP32-C3, Raspberry Pi 3 and the bare RISC-V board do not emulate I2C/SPI
peripherals, so no I2C/SPI device (this or any other) attaches there yet.
Extends the over-voltage rule to the two cases the previous slice deferred:
- Boards (ESP32 / Pico / Arduino / ...): a board's supply pins all collapse to
the self-driven vcc_rail net, so an external source on them makes the .op
singular rather than readable. Added a graph-based check (runs before the
solve): if a power source is wired to a board supply pin and its nominal
voltage exceeds that pin's rating, warn. Threaded boardKind into
BoardForSpice so the verifier can look up the board rating.
- Electrolytic capacitors: new `voltage` rating property (select, default 25V,
on capacitor-electrolytic + cap-elec-* presets, via component-overrides +
regenerated metadata). The verifier reads the DC voltage across the +/- pins
and warns on over-voltage (vent/burst) and on reverse polarity (a polarized
cap wired backwards). Defaults to 25V when the property is unset.
Tests: 9V battery -> ESP32 VIN warns, 1.5V doesn't; 24V across a 16V cap warns,
5V across a 25V cap doesn't; reverse-biased cap warns. All real-ngspice.
The stepper-motor and biaxial-stepper parts only decoded a one-hot wave-drive coil sequence, so they never rotated under the common two-phase full-step / Stepper.h / AccelStepper drive that Wokwi's own examples use -- only the servo moved. Rewrote both decoders to track the net magnetic-field vector of the coils (atan2 of the H-bridge currents), so the rotor follows wave, two-phase full-step and half-step drive alike, whether driven directly from GPIO or through a driver's outputs.
Also adds an A4988 STEP/DIR stepper driver (parity with Wokwi's wokwi-a4988): velxio-a4988 element renders the real Pololu A4988 Fritzing breadboard SVG (public/components/a4988.svg); MotorDriverParts.ts finds the wired stepper via the netlist and advances it one (micro)step per STEP rising edge in the DIR direction (MS1-3 microstep + active-low ENABLE). Metadata in component-overrides.json. Three examples (Uno/ESP32/Pico) wire MCU STEP/DIR -> A4988 -> stepper, coil map aligned to Wokwi (1A->B+,1B->B-,2A->A+,2B->A-).
Verified in-browser: motor rotates on Arduino Uno (avr8js) and Raspberry Pi Pico (rp2040js). tsc --noEmit clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The KY-040 rotary encoder was already fully simulated (wokwi-ky-040 element + PartSimulationRegistry 'ky-040' driving CLK/DT quadrature and the SW button) and present in the catalog, but unfindable: named 'KY040', in the 'other' category, with no rotary/encoder search tags and a placeholder thumbnail. A user searching 'rotary encoder' got nothing (issue #104).
- generate-component-metadata.ts: let component-overrides.json patch category, description and tags on scanned wokwi parts (previously only name/thumbnail) -- the fields the picker category tab and ComponentRegistry.search() actually use. - component-overrides.json: ky-040 override -> name 'KY-040 Rotary Encoder', category 'input', rotary/encoder/knob tags, description, real encoder thumbnail SVG. - examples.ts: KY-040 + Arduino Uno example (quadrature read + SW reset). Regenerated components-metadata.json; searching rotary/encoder/knob now returns the KY-040. tsc clean.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Two CI failures landed together on master after PR #194 merged:
1. **components-metadata.json stale.** The `power-supply` thumbnail
in scripts/component-overrides.json was updated (grey placeholder
→ branded PSU SVG with voltage/current labels) but the generated
JSON wasn't regenerated. The pre-merge check
`git diff --quiet frontend/public/components-metadata.json` now
fails on master. Fix: `cd frontend && npm run generate:metadata`,
commit the result.
2. **Frontend Tests > test (20/22): vitest worker hang.**
`circuit-simulation-service.test.ts` had been calling
`service.start()` in ~10 tests without storing the returned
unsubscribe handle. Each call subscribes the service to the
simStore; the listener captures the service + scheduler in
its closure. After all tests complete, vitest's forks pool
tries to terminate the worker but the still-active listeners
keep the event loop pinned, producing:
"Worker exited unexpectedly / Timeout terminating forks worker"
All assertions actually pass — only the worker shutdown hangs.
Fix: introduce a `startTracked(service)` helper that records
the unsubscribe in a module-level array, plus an `afterEach`
that drains the array. `__resetMixedModeScheduler()` still runs
after to dispose the scheduler singleton. Replaced all 9 raw
`service.start()` callsites.
Both are independent of any production code change. The fix is
test/scaffolding only.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Two pieces of drift introduced in 305170a (Regulated Power Supply):
1. The committed components-metadata.json carries a custom rich
thumbnail SVG (showing 5.00V / 1.00A / PSU labels), but the
_customComponents override has no `thumbnail` field — so any
regen via `npm run generate:metadata` replaces it with the
generic placeholder. CI catches the drift and fails.
Fix: lift the rich SVG into the override entry.
2. The committed metadata description is a short one-liner while
the override description is the longer explanatory version.
The override is the source of truth, so the metadata now
matches: longer description wins.
Verified locally: regenerator now produces zero diff against the
committed metadata.
Adds a new picker entry 'Regulated Power Supply' under the analog
category. Conceptually fills the gap between wokwi-battery (fixed
DC) and wokwi-signal-generator (waveform focus): user chooses
voltage + mode (dc / ac) + currentLimit, no need to think about
battery chemistry or signal amplitudes.
Properties:
mode: 'dc' | 'ac' (default 'dc')
voltage: V (default 5)
frequency: Hz (default 50, only for AC)
currentLimit: A (default 1)
Design notes:
- No new Web Component. The tagName piggy-backs on
wokwi-signal-generator so the canvas renders the familiar
bench-instrument chrome — saves shipping a second 100+ LOC
Web Component for an identical 2-pin shape.
- SPICE: ideal V-source + ESR sized so a near-short reads
I ≈ 1.5·limit. ngspice has no native foldback so the limit
is a circuitVerifier rule, not a hard SPICE constraint.
- circuitVerifier: extends sourceComponents regex to include
power-supply AND honors the per-instance currentLimit
property as the threshold. Real bench supplies behave this
way — a 100mA-limited supply trips at 100mA, a 5A supply
tolerates 5A before flagging. The error code is
'source-overload' (not 'short-circuit') so the modal copy
matches what the user just configured.
The board GND / VCC pins of Arduino / ESP32 / etc. already act
as voltage sources via BOARD_PIN_GROUPS canonicalisation (the
NetlistBuilder maps wires to the right rail). So the user's
companion request — 'board pins should already work' — is the
existing behaviour; this commit only adds the standalone bench
supply for boardless circuits or for testing with a different
voltage.
- Implement HD44780Decoder for decoding I2C commands to HD44780-compatible LCDs.
- Add bmp280_bridge_reader.ino to read BMP280 chip_id and status registers via I2C.
- Create i2c_scanner_multi.ino to scan I2C addresses and report responding devices.
- Introduce lcd_i2c_hello.ino to demonstrate basic LCD functionality with I2C.
- Implement pcf8574_bidirectional.ino to test bidirectional communication with PCF8574.
- Add pico_i2c_master_reader.ino for reading BMP280 from a Raspberry Pi Pico.
- Create rtc_lcd_clock.ino to display time from a DS1307 RTC on an I2C LCD.
The hand-drawn SVGs in Bmp280Element.ts and Attiny85Element.ts were
functional but obviously amateur next to a real Fritzing-drawn part.
Both components now mount the equivalent Fritzing breadboard SVG as a
public static asset (`<image href>` in the shadow DOM SVG), with pin
coordinates remapped to the new artwork and pin-name labels overlaid
on top so the user can still read each connector at a glance.
frontend/public/component-svgs/bmp280.svg (new)
Verbatim copy of third-party/fritzing-parts/svg/core/breadboard/
bmp180_breadboard.svg. The Adafruit BMP180 breakout is the
mechanically identical Bosch predecessor — same I2C interface,
same 4-pin pinout. Pin labels lifted from the matching .fzp.
frontend/public/component-svgs/attiny85.svg (new)
Verbatim copy of the Fritzing ATtiny85 DIP-8 breadboard art.
Bmp280Element.ts
Width 80×100 px (Fritzing aspect 28.35:35.43 ≈ 0.8:1, exact uniform
scale of 2.822 px/mm). Pin coords for SDA / SCL / GND / VCC matched
to the connector centres in the source SVG. Pin labels overlaid on
top. Existing wired example (esp32-bmp280) re-routes automatically
because the wire system reads coords by pin name from pinInfo.
Attiny85Element.ts
Width 160×132 px (Fritzing aspect 28.801:23.768 ≈ 1.21:1, exact
uniform scale of 5.555 px/mm). The Fritzing layout puts pins on the
TOP and BOTTOM edges (4 each), not LEFT and RIGHT like the older
hand-drawn version. Pin coords land on clean numbers
(x ∈ {20, 60, 100, 140}, y ∈ {6, 126}). Built-in LED on PB1 stays
as an overlaid circle outside the chip body.
Wires in the existing attiny85-* examples re-route automatically by
pin name; external components positioned to the right of the chip
may need a manual nudge for clean routing — but they work.
frontend/src/components/simulator/BoardOnCanvas.tsx
attiny85: { w: 160, h: 100 } → { w: 160, h: 132 } to match the new
aspect ratio. Same width as before so the chip occupies the same
horizontal slot in existing example layouts.
scripts/component-overrides.json
BMP280 thumbnail updated to mirror the Fritzing colour scheme
(dark blue PCB, BMP180 silkscreen, four gold connector circles)
so picker and canvas feel consistent.
frontend/public/components-metadata.json
Regenerated.
docs/THIRD_PARTY.md
New "Fritzing parts library" section. Both new assets are listed
with their upstream paths plus the CC-BY-SA licence and link to
the parts repo. Future Fritzing copies must be added there too.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
A beta tester reported "BMP280 - module graphic missing" — picking the
example loaded a working sketch but the canvas component fell back to
the MPU6050 placeholder.
Bmp280Element.ts already exists and registers velxio-bmp280 with the
right pinInfo, but it was never injected into components-metadata.json,
so the component picker and CircuitPreview didn't know about it. Add
an entry in scripts/component-overrides.json under _customComponents
(per CLAUDE.md §6b — direct edits to the generated JSON would be
clobbered by the next metadata regen) and regen.
The thumbnail mirrors the GY-BMP280 breakout look from the Web
Component itself: green PCB, black die label, four gold pin pads.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Implement UC8159cDecoder for handling 7-colour ACeP panels.
- Introduce painting functions for UC8159c frames in EPaperPart.
- Update EPaperPart to handle both SSD168x and UC8159c frame types.
- Add integration tests for EPaperPart and UC8159cDecoder.
- Create example sketch for 5.65" ACeP 7-colour panel.
- Enhance error handling in test cases for library dependencies.
- Introduced EPaperPanels.ts to define configurations for various ePaper panels including dimensions, refresh rates, and controller details.
- Implemented SSD168xDecoder.ts to handle the decoding of SPI commands for the SSD168x family of ePaper displays.
- Created EPaperPart.ts to manage the simulation of ePaper panels, integrating with the existing simulator architecture and handling events.
- Added example sketches for 2.13", 2.9", 4.2", and 7.5" ePaper displays, demonstrating basic functionality and text rendering.
- Ensured compatibility with AVR, RP2040, and ESP32 platforms, with appropriate pin configurations for each.
The SPICE emitter already reads properties.lux (default 500, 100 nA/lux)
but the UI had no way to set it — the static dialog rejected the "range"
control type and there was no entry in SENSOR_CONTROLS for the live panel.
- Add photodiode entry in SENSOR_CONTROLS (slider 0-1000 lux)
- Register a minimal PartSimulationRegistry handler that forwards slider
values via emitPropertyChange so the netlist memo invalidates
- Switch the photodiode lux control from "range" to "number" so the
static ComponentPropertyDialog renders an editable input
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Implemented a script to inject passive-component preset variants into `scripts/component-overrides.json`, including resistors, capacitors, and inductors with custom names and thumbnails.
- Added a new custom element `<wokwi-capacitor-electrolytic>` representing a polarized aluminum-can capacitor with appropriate SVG representation.
- Updated metadata generation to accommodate new component names and thumbnails for better user experience in the component picker.
- Marked submodules `qemu-lcgamboa` and `rp2040js` as dirty to reflect local changes.
- Replaced syncStoreProperty function with emitPropertyChange to decouple parts from Zustand store.
- Updated relay component mapping to ensure proper handling of coil and contact states.
- Added new test cases for half-wave rectifier and relay-controlled LED to ensure correct functionality.
- Introduced InlineComponentSVGs for schematic-style icons of various components.
- Updated submodule references for qemu-lcgamboa, rp2040js, and wokwi-elements to indicate dirty state.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
- Implement `serial-batching.test.ts` to verify the behavior of `createSerialBatcher`, ensuring it coalesces multiple appends into a single flush, preserves byte order, and groups by board.
- Create `spice-rectifier-integration.test.ts` to test the end-to-end functionality of the Half-Wave Rectifier example, covering the entire simulation pipeline from input building to circuit solving.
- Add `spice-rectifier-live-repro.test.ts` to reproduce a live-app failure scenario, tracing through each layer of the simulation to identify potential failure points.
- Introduce `spice-signal-generator-tran.test.ts` to validate the behavior of the signal generator and ensure correct analysis type switching based on circuit components.
- Establish `serialBatcher.ts` to implement a batching mechanism for USART output, reducing the frequency of store updates and preventing React's maximum update depth error.
- Decoupled electrical simulation from the simulator store, ensuring SPICE is always active for accurate circuit analysis.
- Removed feature flag for electrical simulation, simplifying the state management.
- Preloaded SPICE engine at app start to eliminate latency during the first solve.
- Added comprehensive tests for MOSFET PWM LED behavior and NPN transistor switch functionality, ensuring correct current flow and response to pin states.
- Implemented diagnostics for floating input nodes in RC low-pass filter circuits, addressing singular matrix issues in SPICE simulations.
- Introduced active semiconductor metadata registry for better component management and simulation fidelity.
- Updated Vite configuration to force re-bundling of local wokwi-elements after component additions.
fix: increase timeout for compilation requests to 180 seconds
refactor: call recalculateAllWirePositions after loading examples
chore: update subproject commit for rp2040js to dirty state
chore: update subproject commit for wokwi-elements to dirty state
Adds 44 SPICE mappers, 58 custom metadata entries, and 12 visual
Web Components covering logic gates, transistors, op-amps, regulators,
sources, electromechanical parts and integrated-circuit packaging.
Fase 9 — component catalog expansion
------------------------------------
- 7 logic gates (AND/OR/NAND/NOR/XOR/XNOR + NOT) as SPICE B-sources
- 8 multi-input gates (AND/OR/NAND/NOR with 3 and 4 inputs)
- 9 transistors: 5 BJTs (incl. PNP 2N3906/BC557) + 4 MOSFETs (incl.
P-channel IRF9540/FQP27P06). NMOS refactored from Level=3 W=0.1
(hangs ngspice) to Level=1 with sane W/L
- 5 op-amps: LM358, LM741, TL072, LM324 with per-chip saturation
rails + opamp-ideal
- 4 linear regulators (7805, 7812, 7905, LM317) with dropout
- 3 batteries (9V, AA, coin-cell) with realistic ESR
- Signal generator (sine / square / DC)
- 2 Schottky diodes (1N5817, 1N5819) + photodiode (lux-driven
current source)
Fase 10 — electromechanical + ICs
---------------------------------
- Relay (SPDT): coil + L + S-switch with native hysteresis +
flyback diode, inverted-control trick for the NC contact
- Optocouplers 4N25 and PC817 (LED + CCCS with CTR=0.5 / 1.0)
- 7 74HC ICs as DIP-14 packages emitting 4 or 6 B-sources per
component (first mapper pattern emitting multiple device cards)
- 3 flip-flops (D, T, JK) — digital-sim only (edge detection is
not representable in ngspice .op)
- L293D dual H-bridge motor driver
Infrastructure
--------------
- scripts/component-overrides.json gains a _customComponents[] array
that lets new Velxio-only parts survive metadata regeneration
(previously applyOverrides() could only patch wokwi-elements
components that had already been scanned)
- scripts/generate-component-metadata.ts injects custom entries
before the patch loop
- New ComponentCategory values: 'logic', 'analog', 'electromech'
- frontend/src/components/DynamicComponent.tsx PASSIVE tracing
extended from just ['resistor','resistor-us'] to 9 two-terminal
passives with per-part pin name maps
- New CI workflow test-circuit.yml runs the sandbox on push/PR
- frontend-tests.yml regenerates metadata and fails if committed
JSON is stale
- Documented 2 new ngspice gotchas in circuit-emulation-gotchas.md:
unicode in netlist titles silently hangs the parser, and
MOSFET Level=3 + W=0.1m causes .op to hang
- 164/164 sandbox tests passing in ~9 s (was 88 pre-fase-9)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Implemented Bmp280Element as a custom web component for the BMP280 barometric sensor, including SVG representation and pin configuration.
- Created CircuitPreview component to render circuit thumbnails using SVGs of components, including support for various boards and components.
- Added a script to generate SVG files from wokwi-elements, ensuring proper formatting and structure for reliable rendering.
- Introduced a test HTML generation script to visualize component SVGs.
This commit introduces a detailed markdown document outlining the process of simulating DHT22 and HC-SR04 sensors on the ESP32 platform using Velxio's QEMU fork. The documentation covers the context of the simulation, key callbacks, problems encountered, and solutions implemented for both sensors. It includes architectural details, end-to-end testing procedures, and guidelines for adding new GPIO-timed sensors. The aim is to provide maintainers with a thorough understanding of the GPIO logic and the challenges faced during development.
- Updated the threshold for switching to data mode in MPU6050Slave from 2 to 3 WHO_AM_I reads to ensure correct chip identification.
- Enhanced comments in the code to clarify the sequence of I2C events during initialization.
- Added a new test file `test_mpu6050_emulation.py` to validate the MPU6050Slave state machine and ensure it handles the full Adafruit_MPU6050::begin() event sequence correctly.
- Updated existing tests to reflect the changes in the I2C handling logic.
- Modified `components-metadata.json` to update the generated timestamp.
- Marked submodules `rp2040js` and `wokwi-elements` as dirty to reflect local changes.
- Updated components-metadata.json with new generated timestamp.
- Refactored Esp32C3Simulator.ts to remove unnecessary debug variables and logging, and added support for additional ROM functions.
- Modified useSimulatorStore.ts to clarify bridge usage for ESP32 boards.
- Updated submodules for QEMU and other libraries to indicate dirty state.
- Added test_esp32c3_emulation.py for end-to-end testing of ESP32-C3 emulation, including compilation, flash image merging, and GPIO event checking.
- Added detailed logging for GPIO changes, system events, and errors in simulation websocket.
- Improved ESP32 firmware handling by merging individual binaries into a single 4MB flash image.
- Updated ESP32 bridge to handle serial output and GPIO changes with appropriate logging.
- Introduced integration test for ESP32 emulation, covering compilation, WebSocket connection, and event handling.
- Enhanced examples to include ESP32 projects and updated the examples gallery to reflect new board types.
- Refactored simulator store to manage ESP32 bridge and simulator instances more effectively.
- Updated requirements to include esptool for ESP32 firmware management.
Keep only build_qemu_step4.sh (the DLL relink step used in production).
Deleted: build_qemu_dll.sh, build_qemu_step3.sh, check_tools.sh,
fix_distlib.sh, fix_distlib2.sh, install_git.sh, install_meson.sh
(all were used once during initial DLL compilation setup)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Added LogicGateParts.ts for simulating various logic gates (AND, NAND, OR, NOR, XOR, NOT).
- Introduced ProtocolParts.ts for simulating I2C and SPI components including SSD1306 OLED, DS1307 RTC, MPU6050 IMU, DHT22 sensor, HX711 load cell, IR receiver, IR remote, and MicroSD card.
- Implemented BasicParts.ts with a membrane keypad and rotary dialer simulations.
- Enhanced SensorParts.ts with a single NeoPixel and PIR motion sensor.
- Updated index.ts to include new parts for logic gates and protocols.
- Modified vite-env.d.ts to declare new custom elements for the added components.
David Montero Crespo