The full LM358 SPICE3 subcircuit from National Semiconductor (via
stmbl) is now exported as LM358_SUBCKT from
simulation/spice/models/lm358Subckt.ts. Internal models renamed
DX→DX_LM358 and QX→QX_LM358 so the subckt coexists cleanly with any
other vendored library.
Integration into opamp-lm358 was attempted and reverted — the
subckt's internal capacitors/inductors/poly sources cause ngspice
`.op` to time out (>60 s) on a simple unity-gain follower. The
behavioural B-source clamp remains the active model. When Phase 1c
moves the default analysis to `.tran` (or we add `.options gmin=1e-10`
selectively for op-amp-containing netlists), the subckt is sitting
right next door waiting to be wired in.
Phase 2.2 lockdown test guards the asset:
- declares `.SUBCKT LM358 1 2 99 50 28` interface (IN+ IN- V+ V- OUT)
- ensures internal model names are LM358-scoped (not the bare DX/QX
that collide with other SPICE libraries)
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Fixes the gap that Phase 1b step 4 surfaced: the legacy pinNetMap was
built from board endpoints only, so the bridge from legacy solver to
MixedModeScheduler had nothing to publish for component pins like
"q1:C" — every SpiceResolvedPinResolver was stuck on FLOATING.
Now pinNetMap contains an entry for every wire endpoint, board or
component. Backwards compatible: legacy ADC injection only ever looked
up `boardId:pinName` keys, which are unchanged.
The new e2e integration test wires up real ngspice (eecircuit-engine,
no mock):
Arduino pin 9 → 1k → 2N2222 base; collector via 220 to 5V
- pin 9 HIGH → BJT saturated → Vc ≈ 0.05V → resolver emits LOW
- pin 9 LOW → BJT cut off → Vc ≈ 5V → resolver emits HIGH
Validated against the AVR_HC logic family (Phase 3). With 216 tests
green across 25 files, the Phase 1b pipeline is now demonstrably
correct end-to-end against a real SPICE solver, not just mocks.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Connects the existing electrical solver's output (nodeVoltages +
pinNetMap from useElectricalStore) to the mixed-mode scheduler's
voltage cache. SpiceResolvedPinResolver subscribers now actually see
live voltages — they were stuck on FLOATING until this commit.
Design:
- `connectLegacySolverToMixedMode()` subscribes to useElectricalStore.
On every nodeVoltages / pinNetMap change it walks pinNetMap and
calls scheduler.publishVoltage(componentId, pinName, v) for each
pin. Ground pins (canonical net '0') resolve to 0 V directly.
NaN / Infinity voltages are skipped.
- `connectLegacySolverToMixedModeFor(store, scheduler)` is the
lower-level form used by tests so neither Zustand nor the WASM
scheduler need to boot.
- EditorPage mounts both `wireElectricalSolver` (legacy ADC path) and
`connectLegacySolverToMixedMode` (new SPICE-resolved path) in the
same useEffect — they coexist; the connector only routes events,
so no behaviour regresses for components that don't opt into
SpiceResolvedPinResolver.
7 new unit tests cover initial publish, re-publish on store change,
ground-pin shortcut, NaN filtering, and unsubscribe cleanup.
This is the wiring that completes Phase 1b's end-to-end pipe. The
WASM-driven onMcuPinChange path (loadCircuit + alter + tran in the
scheduler itself) stays available for future migration off the legacy
solver entirely — see Phase 1b doc.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Wires the second half of the mixed-mode event loop on top of the
voltage cache that step 1 added.
Step 2 — loadCircuit + resolveDc:
- `loadCircuit(netlist, pinNetMap)` accepts the artifacts that
NetlistBuilder already produces, boots the engine lazily, calls
`loadNetlist`, and clears the voltage cache so stale values from a
previous circuit cannot leak through.
- `resolveDc()` runs `op` and walks the pinNetMap, calling readVec for
each non-ground net and publishVoltage for each pin. Ground pins
short-circuit to 0 V without an extra round-trip. Missing nets are
skipped quietly so a disconnected probe pin can't break the resolve.
Step 3 — onMcuPinChange:
- Issues `alter V_<board>_<pin> dc <volts>` and re-resolves. Caller
decides the volts: `state ? vcc : 0` for plain digital, but boards
with open-drain / output-impedance semantics can pass any number.
- Silent no-op when no engine has been started, so legacy paths that
fire pinChange unconditionally can't crash the simulator.
NgSpiceClient interface added and exported so unit tests can inject a
fake engine that records alter() calls and returns canned readVec
values — `__setSchedulerEngineFactoryForTests`. 7 new tests cover the
load → resolve → alter → republish loop end-to-end without booting
the real WASM worker.
The orchestration layer (Zustand subscriber / DynamicComponent hook)
that calls `loadCircuit` whenever the canvas changes is the next step.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds the runtime plumbing that Phase 1b's SPICE event loop will drive:
- `publishVoltage(componentId, pin, voltage)` updates a (componentId,
pin) → volts cache and notifies every matching subscriber.
- `getCurrentVoltage(...)` reads the cache (was previously stubbed
null).
- subscribe/publish routing exercised by 7 new unit tests.
The scheduler still does not yet drive ngspice — `start()`,
`onMcuPinChange()` are unchanged. But once Phase 1b's solve loop is in
place, calling `publishVoltage` after each `readVec` is all the wiring
needed for components to start reacting to SPICE-resolved analog
states. This is the smallest non-trivial step that keeps the
architecture honest (no test-only emitters; the same code path will be
used in production).
Tests skip booting the WASM worker — they call publishVoltage
directly, so they pass in plain Vitest with no JSDOM Worker shim.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Switches 3 of the 4 simulated MOSFETs from Level=1 Shichman-Hodges
to LTSpice VDMOS macro-models. VDMOS captures real-device behaviour
(Ron, gate charge Qg, gate-drain Miller capacitance Cgdmax/Cgdmin,
body diode) that Level=1 fundamentally can't model.
Instance line changes from
M_id D G S S MODEL L=2u W=200u (4-terminal NMOS + W/L)
to
M_id D G S MODEL (3-terminal VDMOS)
Parts migrated:
mosfet-2n7000 → 2N7002 VDMOS (Vto=1.6, Ron=2 ohm — matches old Vto)
mosfet-irf540 → IRF530 VDMOS (Vto=4, Ron=160m — IRF540 missing
from LTSpice library, IRF530 is the
closest same-series part)
mosfet-irf9540 → IRF9640 VDMOS (pchan, Vto=-3.5 — IRF9540 missing,
IRF9640 is the 200V P-channel sub)
mosfet-fqp27p06 kept on Level=1 (no upstream VDMOS equivalent yet).
spice-mosfet-pwm regression test still passes: Id=8.6 mA at Vgs=5V,
0 at Vgs=0V, monotonic across the ramp. All 155 SPICE + analog
examples + lockdown tests pass.
Phase 2.1 lockdown test added — verifies VDMOS-shape instance line
(5 tokens, no L=/W=) and that the .model card carries `VDMOS(`.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Replaces the truncated 4-5 param NPN/PNP/D models in componentToSpice.ts
with full Gummel-Poon / SPICE3F5 parameter sets sourced from the
LTSpice-Libraries (Linear Tech standard.bjt and standard.dio). Junction
capacitances, transit times, and reverse-recovery now match real-device
behaviour — circuits using these parts will now exhibit correct AC and
switching response on top of DC saturation.
Parts upgraded:
BJT NPN: 2N2222, BC547, 2N3055
BJT PNP: 2N3906, BC557
Diode: 1N4148 (silicon switching), 1N5817, 1N5819 (Schottky)
MOSFET (Level=1) and 1N4007/zener kept as-is - they need separate
VDMOS migration validated against the MOSFET PWM regression test.
Phase 2.0 of the mixed-mode simulator project. See
velxio-prod/project/sim-mixedmode/phase-02-device-models.md.
All 115 SPICE tests pass; relay-integration test confirms the netlist
dedupe set still collapses two D1N4148 references (canonical diode +
relay flyback) into a single .model line.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Adds the architecture pieces for mixed-mode coupling without yet
driving the SPICE engine. Components on a path that crosses an active
device (BJT, MOSFET, op-amp, diode, regulator, LED, relay) now route
through a new SPICE-resolved PinResolver variant; everything else
keeps the digital fast-path from Phase 0.
What ships:
- simulation/PinResolver.ts
* `isActiveDevice(metadataId)` predicate + `ACTIVE_DEVICE_PREFIXES`
list (BJTs, MOSFETs, op-amps, diodes, regulators, LED, relay).
* `DetailedPinTrace` / `DetailedPinTracer` types — the trace
function now reports whether it crossed an active device, on
top of the Arduino pin number.
* `createSpiceResolvedPinResolver()` — new factory; reads voltages
from a `SpiceVoltageSource` and threshold-converts to HIGH/LOW
with hysteresis (thresholdHigh != thresholdLow → Schmitt-like).
- simulation/spice/MixedModeScheduler.ts (new)
* Singleton orchestrator that holds the NgSpiceInteractive engine
and the SpiceVoltageSource subscription registry.
* `start()` / `stop()` / `dispose()` lifecycle.
* `subscribe()` + `getCurrentVoltage()` implement SpiceVoltageSource.
* `onMcuPinChange()` placeholder for the alter+tran event loop.
* Skeleton: subscribers register but never receive events yet.
Phase 1b continued will wire NgSpiceInteractive into the loop.
- components/DynamicComponent.tsx
* Trace function extended with `traceDetailed()` that tracks
whether the BFS crossed an active component.
* PinResolver factory branches: active-path → SPICE-resolved (uses
the scheduler), digital-only → existing default impl. Default
threshold = vcc/2 with no hysteresis; Phase 3 will replace with
per-logic-family Vil/Vih.
Phase 0 LED behavior intact (digital path). Phase 1b SPICE-resolved
path falls back to FLOATING until Phase 1b continued wires the engine.
Tests:
- pin-resolver-phase1b.test.ts (new) — 8/8 passing.
Covers isActiveDevice for every BJT/MOSFET/op-amp/diode/regulator
metadata id; SPICE-resolved resolver state reporting, threshold
conversion, hysteresis dead-band, unsubscribe.
- pin-resolver.test.ts (Phase 0) — 8/8 still passing (no regression).
- tsc --noEmit on the new files: clean.
No deploy in this commit — staged for end-of-session rebuild + push
per user preference.
Phase 1a of the mixed-mode simulator project. Vendors prebuilt
ngspice+XSpice WASM artifacts from ejkreboot/ngspice-xspice-wasm (MIT,
2026) and adds a TypeScript client that exposes the ngspice shared
callable API for interactive (event-driven) use.
What's vendored at frontend/public/wasm/ngspice-interactive/ (~27 MB):
- ngspice-lib.wasm (24 MB) — ngspice 33 + XSpice, MAIN_MODULE
- ngspice-lib.js (2.7 MB) — Emscripten glue
- {analog,digital,xtradev,xtraevt,table,tlines,spice2poly}.cm
— XSpice code models, loaded dynamically
- spinit — ngspice startup script
- PROVENANCE.md — sources + license info
Note on the cost: 27 MB is a one-way commit to git history, but the
existing eecircuit-engine dependency already ships 39 MB in node_modules
(not tracked, re-downloaded per build). Vendoring our copy:
- removes a third-party npm dependency
- pins the exact build we tested with
- means the WASM is served as a static asset (no Vite chunking)
The alternative (publish as @velxio/ngspice-interactive-wasm) was
deferred to keep the iteration cycle fast during Phase 1+.
New TypeScript client at frontend/src/simulation/spice/wasm/:
- NgSpiceInteractive.ts — Promise-based client class with
init / loadNetlist / command /
alter / readVec / reset / dispose
- ngspice-interactive-worker.js — vendored from ejkreboot's worker
and extended with 'loadNetlist',
'command', 'readVec' message types
plus per-command stdout/stderr
capture
POC test at __tests__/ngspice-interactive.test.ts (skipped in node env
because Worker isn't available; runs in a browser-mode test env):
- voltage divider .op → reads v(mid) ≈ 2.5V
- RC step → reads v(cap) time series, final ≈ 5V
- alter Vsrc → second .tran → final ≈ 1V (proves alter+rerun works)
Known limitation deferred to Phase 1b: the vendored WASM is built
without pthreads (no -sUSE_PTHREADS=1), so ngspice's bg_run is
synchronous-blocking. True mixed-mode event injection requires a
pthread-enabled rebuild (with SharedArrayBuffer + cross-origin
isolation). For Phase 1a we use the workaround: chained short-tran
invocations with `alter` between them. The new architecture is built
to swap in a real bg_halt/bg_resume implementation later without
changing component handlers — see NgSpiceInteractive.ts docstring.
Tests passing:
- pin-resolver (Phase 0): 8/8
- ngspice-interactive: 3 skipped (need browser env)
- tsc --noEmit on the new files: clean
- Implement HD44780Decoder for decoding I2C commands to HD44780-compatible LCDs.
- Add bmp280_bridge_reader.ino to read BMP280 chip_id and status registers via I2C.
- Create i2c_scanner_multi.ino to scan I2C addresses and report responding devices.
- Introduce lcd_i2c_hello.ino to demonstrate basic LCD functionality with I2C.
- Implement pcf8574_bidirectional.ino to test bidirectional communication with PCF8574.
- Add pico_i2c_master_reader.ino for reading BMP280 from a Raspberry Pi Pico.
- Create rtc_lcd_clock.ino to display time from a DS1307 RTC on an I2C LCD.
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
- Implemented a script to inject passive-component preset variants into `scripts/component-overrides.json`, including resistors, capacitors, and inductors with custom names and thumbnails.
- Added a new custom element `<wokwi-capacitor-electrolytic>` representing a polarized aluminum-can capacitor with appropriate SVG representation.
- Updated metadata generation to accommodate new component names and thumbnails for better user experience in the component picker.
- Marked submodules `qemu-lcgamboa` and `rp2040js` as dirty to reflect local changes.
- Replaced syncStoreProperty function with emitPropertyChange to decouple parts from Zustand store.
- Updated relay component mapping to ensure proper handling of coil and contact states.
- Added new test cases for half-wave rectifier and relay-controlled LED to ensure correct functionality.
- Introduced InlineComponentSVGs for schematic-style icons of various components.
- Updated submodule references for qemu-lcgamboa, rp2040js, and wokwi-elements to indicate dirty state.
- Implement `ammeter-waveform.test.ts` to validate AC readings from a sine wave source.
- Create `capacitor-charge-transient.test.ts` to test the charging response of an RC circuit driven by a microcontroller pin.
- Introduce `esp32-rectifier-integration.test.ts` for testing rectifier behavior using QEMU and ESP32.
- Add helper functions in `esp32RectifierE2E.ts` for the rectifier test harness.
- Develop `voltmeter-waveform.test.ts` to ensure correct AC and DC readings from a sine wave source.
- Implement unit tests for waveform statistics in `waveform-stats.test.ts` to validate RMS, mean, peak, and interpolation functions.
- Create `waveformStats.ts` to provide statistical functions for time-domain waveform analysis.
- Implement `serial-batching.test.ts` to verify the behavior of `createSerialBatcher`, ensuring it coalesces multiple appends into a single flush, preserves byte order, and groups by board.
- Create `spice-rectifier-integration.test.ts` to test the end-to-end functionality of the Half-Wave Rectifier example, covering the entire simulation pipeline from input building to circuit solving.
- Add `spice-rectifier-live-repro.test.ts` to reproduce a live-app failure scenario, tracing through each layer of the simulation to identify potential failure points.
- Introduce `spice-signal-generator-tran.test.ts` to validate the behavior of the signal generator and ensure correct analysis type switching based on circuit components.
- Establish `serialBatcher.ts` to implement a batching mechanism for USART output, reducing the frequency of store updates and preventing React's maximum update depth error.
- Decoupled electrical simulation from the simulator store, ensuring SPICE is always active for accurate circuit analysis.
- Removed feature flag for electrical simulation, simplifying the state management.
- Preloaded SPICE engine at app start to eliminate latency during the first solve.
- Added comprehensive tests for MOSFET PWM LED behavior and NPN transistor switch functionality, ensuring correct current flow and response to pin states.
- Implemented diagnostics for floating input nodes in RC low-pass filter circuits, addressing singular matrix issues in SPICE simulations.
- Introduced active semiconductor metadata registry for better component management and simulation fidelity.
- Updated Vite configuration to force re-bundling of local wokwi-elements after component additions.
Electrical simulation is now active by default (mode='spice' instead of
'off') — users no longer need to toggle the mode on manually. The engine
lazy-loads on first solve, so there is no startup cost penalty.
Changes:
- useElectricalStore: default mode = 'spice' when ELECTRICAL_SIM_ENABLED
- subscribeToStore: ADC_PIN_MAP expanded to all 18 board types (Uno, Nano,
Mega with 16 ADC channels, ATtiny85, RP2040 GP26-29, ESP32/S3/C3 GPIO
ADCs). Voltages from SPICE solutions now inject into MCU ADC peripherals
for all boards.
- BasicParts LED: reads branchCurrents from useElectricalStore when SPICE
is active. Brightness = clamp(|I_led| / 20mA, 0, 1) instead of boolean.
Subscribes to store changes to update in real time.
- ElectricalOverlay: shows per-wire voltage labels (gold monospace on dark
pill) using buildWireNetMap() which replicates the NetlistBuilder's
Union-Find to map wireId -> netName -> nodeVoltage. Summary pill shows
net count + solve time.
- NetlistBuilder: new export buildWireNetMap() for lightweight wire-to-net
resolution without running ngspice.
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
Adds 44 SPICE mappers, 58 custom metadata entries, and 12 visual
Web Components covering logic gates, transistors, op-amps, regulators,
sources, electromechanical parts and integrated-circuit packaging.
Fase 9 — component catalog expansion
------------------------------------
- 7 logic gates (AND/OR/NAND/NOR/XOR/XNOR + NOT) as SPICE B-sources
- 8 multi-input gates (AND/OR/NAND/NOR with 3 and 4 inputs)
- 9 transistors: 5 BJTs (incl. PNP 2N3906/BC557) + 4 MOSFETs (incl.
P-channel IRF9540/FQP27P06). NMOS refactored from Level=3 W=0.1
(hangs ngspice) to Level=1 with sane W/L
- 5 op-amps: LM358, LM741, TL072, LM324 with per-chip saturation
rails + opamp-ideal
- 4 linear regulators (7805, 7812, 7905, LM317) with dropout
- 3 batteries (9V, AA, coin-cell) with realistic ESR
- Signal generator (sine / square / DC)
- 2 Schottky diodes (1N5817, 1N5819) + photodiode (lux-driven
current source)
Fase 10 — electromechanical + ICs
---------------------------------
- Relay (SPDT): coil + L + S-switch with native hysteresis +
flyback diode, inverted-control trick for the NC contact
- Optocouplers 4N25 and PC817 (LED + CCCS with CTR=0.5 / 1.0)
- 7 74HC ICs as DIP-14 packages emitting 4 or 6 B-sources per
component (first mapper pattern emitting multiple device cards)
- 3 flip-flops (D, T, JK) — digital-sim only (edge detection is
not representable in ngspice .op)
- L293D dual H-bridge motor driver
Infrastructure
--------------
- scripts/component-overrides.json gains a _customComponents[] array
that lets new Velxio-only parts survive metadata regeneration
(previously applyOverrides() could only patch wokwi-elements
components that had already been scanned)
- scripts/generate-component-metadata.ts injects custom entries
before the patch loop
- New ComponentCategory values: 'logic', 'analog', 'electromech'
- frontend/src/components/DynamicComponent.tsx PASSIVE tracing
extended from just ['resistor','resistor-us'] to 9 two-terminal
passives with per-part pin name maps
- New CI workflow test-circuit.yml runs the sandbox on push/PR
- frontend-tests.yml regenerates metadata and fails if committed
JSON is stale
- Documented 2 new ngspice gotchas in circuit-emulation-gotchas.md:
unicode in netlist titles silently hangs the parser, and
MOSFET Level=3 + W=0.1m causes .op to hang
- 164/164 sandbox tests passing in ~9 s (was 88 pre-fase-9)
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
davidmonterocrespo24