A programmable custom-chip (a CPU emulator that runs a ROM/program, e.g. the
Z80 or 8080) now keeps its program (larson.s, chaser.c, ...) in a dedicated
editor file group — group-chip-<chipId> — rendered as its own collapsible
section in the file explorer, exactly like each board owns its sketch group.
Behaviour/driver chips and predefined chips carry no programFile and get no
group; they stay editable only in the chip designer.
Fixes two reported issues on the Z80 examples:
- /example/z80-larson-no-board: the board-less chip example now opens its
program (larson.s) as the active group, editable on the left — previously
the editor showed but no file appeared.
- /example/z80-led-chaser-c: the chip program (chaser.c) no longer shows as
a sibling tab inside the Arduino sketch group; it sits in its own chip
section instead. The board group shows only sketch.ino.
Details:
- useEditorStore: chipFileGroupId()/CHIP_GROUP_PREFIX helpers.
- loadExample: seedChipProgramGroups() routes each chip's programFile into its
own group (seeded from the example files), sweeps stale chip groups, keeps
the program OUT of the board group, and for a board-less chip example makes
the chip group active so the program is the editable file shown.
- EditorToolbar.prepareCustomChips: resolves the program from the chip's own
group (falls back to board files for older projects) before assembling ROM.
- FileExplorer: renders one collapsible section per programmable chip with an
IC icon; clicking switches the editor to the chip group. Lazy-creates a
group for chips dropped on the canvas.
- projectPayload + vlxFile: serialise chip groups alongside board groups and
include them in the dirty-check hash, so chip-program edits persist on
save / autosave / .vlx export and round-trip via replaceFileGroups on load.
- Regression tests for board-less + board+chip routing and stale-group sweep.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Two UX bugs in the board-less "Z80 Larson Scanner (no board)" example:
- It loaded "running" (electrical sim defaults to paused=false), so Run was
disabled and Stop enabled even though the chip hadn't started — the user had
to Stop then Run. loadExample now starts a board-less example that contains a
custom chip in the STOPPED state (paused=true) so Run is enabled; pure
analog/digital circuits stay live.
- The chip's program wasn't editable: it shipped a pre-baked ROM and the
board-less loader only setCode'd into an orphan file group (no-op → blank
editor). The example now ships larson.s as a real file (programFile), and
the board-less loader points the editor at the default group and loadFiles()
the example's files, so the program shows on the left and is editable, like
the board-backed examples. Run compiles it.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Cleaner follow-up to the multi-board residue fix. Instead of removing the
extra boards and retyping the surviving one (which left a stale id such as
"stm32-bluepill" on what was now an Arduino Uno), the single-board path now
tears every board down and adds exactly one fresh board of the target kind.
This mirrors the multi-board and board-less paths and guarantees the
surviving board's id matches its kind.
Drops the now-unused setBoardType/activeBoardId destructures and tightens
the boardFilter cast off `any`. Strengthens the regression test to assert
the surviving board's id and kind.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Three reported circuit bugs:
- Deleting the active/running board left the global `running` flag stale
at true. That flag mirrors the active board, but removeBoard reassigned
activeBoardId without re-deriving running, so the circuit looked
"running" (toolbar stuck on Stop, canvas locked) and SimulatorCanvas's
master-switch effect auto-started sibling remote boards. New Project
hits the same path (it removes every board in a loop). removeBoard now
re-derives running from the new active board (false if none remain).
- loadExample's single-board path called setBoardType when boards already
existed but never dropped the extra boards a previous multi-board
example had added, so they lingered as residue. It now removes every
board past the first before retyping, matching the multi-board and
board-less paths.
Adds board-removal-running-reconcile.test.ts (6 regression tests; full
suite 1917 passing).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Closes the deferred Phase 3.3. Root-causes the Pi 2 "Attempted to
kill init" panic as `mount /dev/vda` failing with EINVAL — Debian
armmp does not have ext4 builtin (only fuseblk in /proc/filesystems).
- qemu_manager: PI_CONFIGS gains raspberry-pi-zero / -1 / -2 entries.
All three use the armmp armhf kernel + Cortex-A7 CPU + the mmio
virtio transport (arm-32 virt PCI fails -75 due to missing reg DT
property). Pi Zero / Pi 1 get the small 1-core / 512 MB profile;
Pi 2 gets 4-core / 1 GB. QEMU command builder branches on cfg.bus
for virtio-blk-pci vs virtio-blk-device (and serial likewise).
- manifest.json: new `raspberry-pi-armhf` image_set wiring three
assets (kernel + initramfs + zstd rootfs).
- Frontend BoardKind gains the three new kinds + an isPiBoardKind()
helper. Replaces the eight scattered `=== 'raspberry-pi-3' ||
=== 'raspberry-pi-4' || === 'raspberry-pi-5'` branches in
useSimulatorStore, Interconnect, loadExample, boardProtocols.
ComponentRegistry gets three new picker entries.
- board-kinds-coverage test: ACCEPTED_UNCOVERED gains the new kinds
(backend boards have no canvas examples).
The matching armhf build-pi-kernel.sh / build-pi-rootfs.sh changes
live in velxio-prod's scripts/ (private overlay) — the upstream
kernel build script only knows about arm64; armhf is built in the
private repo because the assets ship through the license endpoint.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Backend: extract per-board config into a PI_CONFIGS dict keyed by
board_type. Pi 3/4/5 share the same arm64 image set (kernel +
initramfs + rootfs) and differ only in QEMU -cpu and -m:
raspberry-pi-3 → cortex-a53 + 1G (BCM2837, ARMv8 64-bit)
raspberry-pi-4 → cortex-a72 + 2G (BCM2711, ARMv8 64-bit)
raspberry-pi-5 → cortex-a76 + 2G (BCM2712, ARMv8 64-bit)
PiInstance now carries board_type so the per-board lookup happens
once at start_instance time. Unknown board_type falls back to
DEFAULT_PI_BOARD ('raspberry-pi-3') instead of erroring out (for
back-compat with older clients).
Pre-warm hook walks every unique image_set in PI_CONFIGS so the
provider only downloads each set once even when several Pi models
are registered.
Frontend:
- BoardKind union gains 'raspberry-pi-4' and 'raspberry-pi-5'.
- BOARD_KIND_LABELS + BOARD_KIND_FQBN entries for both new boards
(FQBN null since they use the Pi VFS + Python toolchain like Pi 3).
- ComponentRegistry inserts two new component metadata entries
cloning the Pi 3 board art with different thumbnail colours.
Tag name reused so the same velxio-raspberry-pi-3 web element
draws the board on the canvas — the 40-pin GPIO layout is
identical across Pi 3/4/5.
- boardProtocols.ts: Pi 3/4/5 share the BCM physical→GPIO table
(PI3_BCM) since the 40-pin header layout is identical.
- loadExample.ts: where 'raspberry-pi-3' is special-cased (VFS
ingest, .cpp vs .ino filename), now matches Pi 3/4/5 alike.
- Interconnect.isPi3Bridge() recognises all three Pi family members
so Arduino↔Pi serial routing keeps working.
- RaspberryPi3Bridge constructor gained a boardKind parameter
defaulting to 'raspberry-pi-3'. The WebSocket 'start_pi' message
now ships the actual board kind so the backend knows which
PI_CONFIGS entry to use.
- useSimulatorStore.addBoard wires bridge construction for all
three Pi family members.
Pi Zero/Pi 1/Pi 2 (armhf) come in Phase 3.3 — separate kernel
package + armhf rootfs build, no change here.
Smoke-tested inside the prod container:
Pi 4 (cortex-a72) → reached agetty login on hvc0
Pi 5 (cortex-a76) → reached agetty login on hvc0
Both show 'aarch64' in uname -m.
Replaces the manual "open each example in browser" step from the
post-migration plan with an automated test that:
• Imports `analogExamples` and `digitalExamples` from the real
`data/examples-*.ts` modules — new gallery entries pick up the
test automatically.
• Uses the same `stripBrandPrefix` + board-filter logic that
production `loadExample.ts` uses, via the new shared helper
`utils/exampleToBuildNetlistInput.ts`. Single source of truth:
if the wokwi/velxio prefix rule ever changes, both production
and the smoke test track it.
• Runs each example through `solveInput` (Phase 1c F2 helper)
against the same ngspice WASM production uses.
`loadExample.ts` refactored to call `stripBrandPrefix` instead of
inlining the regex (two call sites converged on the helper).
Result against the gallery:
• 67/68 examples converge cleanly.
• 1 known regression: `an-opamp-follower` (LM358 follower) — the
same case `examples-analog-live.test.ts` already skips. Item
#2 (.op convergence helpers in NgSpiceWorkerAdapter) targets it.
The smoke test now serves as the safety net for the remaining
post-migration work — it'll flag if a future fix breaks examples
that converge today.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
Critical data-loss bug. Repro:
1. User opens a saved project at /<username>/<slug>. The page sets
useProjectStore.currentProject = { id, slug, ownerUsername, ... }.
Auto-save kicks in and starts watching simulator/editor stores.
2. User clicks the "Examples" link, picks an example, hits Run.
3. loadExample mutates useSimulatorStore (setComponents, setWires,
addBoard, removeBoard) and useEditorStore (loadFiles).
4. Auto-save sees the change. Its eligibility check finds
currentProject still pointing at the user's saved project (we
never touched useProjectStore). It debounces a
PUT /api/projects/<old-id> with the EXAMPLE's components/wires/
files. The user's saved project is overwritten with the example
contents.
The URL changing to /editor isn't enough — useProjectStore is store
state, not router state. ProjectPage / ProjectByIdPage set it on
mount; nothing clears it when the user navigates away.
Fix: loadExample calls useProjectStore.getState().clearCurrentProject()
BEFORE the simulator/editor mutations. autoSaveImpl is subscribed to
useProjectStore via subscribe((s, prev) => ... reset() if id changed),
and Zustand notifies subscribers synchronously inside set(), so the
reset (projectId=null, baseline hash=null) runs in the same tick.
Every subsequent setComponents/setWires/loadFiles fires onChange in
the hook, which now sees projectId=null and returns early. No PUT
ever goes out.
The reset is order-sensitive: it must run BEFORE the store mutations
or the hook would already have queued a save with the old projectId
before we cleared. Comment in the source spells this out so it
doesn't get reordered in a future refactor.
In-flight saves are not affected: buildSavePayload() snapshots state
before its `await updateProject(...)`, so a save that started right
before the example load still sends the user's pre-example state to
the right project. Worst case: the save completes after clear, and
the hook quietly returns idle.
Build verified (vite OSS+pro, 285 SEO pages).
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
- Implemented `i2c-esp32-real-firmware.test.ts` to test ESP32 I2C communication via backend and WebSocket.
- Created `load-example-transitions.test.ts` to ensure proper loading of examples between board-less and board-based contexts.
- Added `CircuitVerificationModal.tsx` to display circuit verification results before running simulations.
- Developed `circuitVerifier.ts` to perform pre-flight checks for circuit safety, identifying potential issues like short circuits and component overloads.
- Introduced minimal ESP32 I2C master sketch `esp32_i2c_writer.ino` for testing I2C transactions.
- Implement HD44780Decoder for decoding I2C commands to HD44780-compatible LCDs.
- Add bmp280_bridge_reader.ino to read BMP280 chip_id and status registers via I2C.
- Create i2c_scanner_multi.ino to scan I2C addresses and report responding devices.
- Introduce lcd_i2c_hello.ino to demonstrate basic LCD functionality with I2C.
- Implement pcf8574_bidirectional.ino to test bidirectional communication with PCF8574.
- Add pico_i2c_master_reader.ino for reading BMP280 from a Raspberry Pi Pico.
- Create rtc_lcd_clock.ino to display time from a DS1307 RTC on an I2C LCD.
- Implemented `esp32_spi_chip_demo.ino` to demonstrate SPI communication with a 74HC595 shift register.
- Created `esp32_uart_chip_demo.ino` for UART loopback testing with ROT13 transformation.
- Added Python tests for compiling chips and sketches, ensuring valid WASM output and successful compilation for various board families.
- Developed end-to-end tests for ESP32 with custom chips using I2C and SPI, validating synchronous communication through the backend.
- Introduced GPIO bridge tests to verify serial communication and GPIO state changes.
- Ensured all tests validate the expected behavior of the custom chips and their interaction with the ESP32 firmware.
Loading an analog-only example removes every board. The single-board
branch of loadExample then called setBoardType, which only maps over
existing entries in boards[] and silently did nothing when the array
was empty — components rendered but no board. Fall back to addBoard +
setActiveBoardId when there are no boards.
- Modified the index file to reflect the new naming convention for Velxio components.
- Changed JSX declarations to use 'velxio-' prefix for various components.
- Updated component overrides to replace 'wokwi-' with 'velxio-' for logic gates and other components.
- Adjusted SVG generation script to use 'velxio-' prefix for BMP280 and Raspberry Pi components.
- Marked submodules as dirty in QEMU and RP2040 libraries.
- Added .prettierignore and .prettierrc.json for consistent code formatting.
- Introduced InstrumentComponent with support for Voltmeter and Ammeter, including pin information handling.
fix: increase timeout for compilation requests to 180 seconds
refactor: call recalculateAllWirePositions after loading examples
chore: update subproject commit for rp2040js to dirty state
chore: update subproject commit for wokwi-elements to dirty state
- Implemented ExampleLoaderPage to load examples by ID from the URL.
- Added ExampleLoaderPage route to App component.
- Created ShareModal for sharing project links with visibility toggle.
- Updated UserProfilePage to include share button for user projects.
- Enhanced ExamplesGallery with a copy link button for examples.
- Introduced utility function loadExample to streamline example loading and library installation.
- Updated project visibility management in useProjectStore.
- Added styles for new components and buttons.
- Updated .gitignore to include Arduino compilation byproducts.
David Montero