The 7.5" 800x480 dashboard (GxEPD2_750_T7) rendered blank: it is a UC8179 /
GD7965 controller, but the panel config claimed controllerFamily 'ssd168x',
so the SSD168x decoder (which only reads 0x24/0x26/0x44/0x45) ignored its
0x10/0x13 DTM stream.
- Add a Uc8179 decoder (worker Uc8179EpaperSlave + browser Uc8179Decoder).
UC8179 is the same UltraChip command family as the UC8159c (0x10/0x13 DTM,
0x12 refresh) but mono (1 bit/px). GxEPD2 writes the visible image to 0x13
(DTM2 "current"; 0x10 is the ignored "previous"), framed by 0x91/0x90
(partial window, pixel coords MSB-first)/0x13 data/0x92. Data lands at
absolute pixel coords inside the window, so compose is just the RAM. The
Frame reuses the SSD168x palette (0=black, 1=white) so paintFrame renders it.
- EPaperPanels.ts: add the 'uc8179' family and point epaper-7in5-bw at it.
EPaperPart.ts + esp32_worker.py dispatch 'uc8179' to the new decoder.
- Fix the BUSY polarity: UC8179 (like the UC8159c) idles BUSY HIGH, not LOW.
The worker seeded BUSY LOW for every non-uc8159c panel, so GxEPD2_750_T7's
_PowerOn()/_InitDisplay() busy-wait timed out (~10 s, "Busy Timeout!") on
every refresh. Now _PowerOn returns in ~129 us.
- esp32_worker.py: the runtime sensor_attach epaper path still emitted the
epaper_update payload nested under 'data' (the old double-wrap bug); emit
it flat like the init path.
The 5.65" ACeP UC8159c example already rendered (it has its own decoder and
got the WS-plumbing fix); verified the 7 colour bars are correct.
The 2.9" tri-colour ESP32 alert badge rendered the red ALERT pill as white:
the red plane (0x26) was received but landed out of bounds and was dropped.
GxEPD2_3C writes the 0x24 (black) plane then the 0x26 (red) plane WITHOUT
re-seeking the RAM address counter between them — it relies on the SSD168x
counter wrapping back to the window start after the last byte of the window.
Our decoder advanced Y past the window end instead of wrapping, so every
0x26 byte hit y >= rows and was discarded (red_ram stayed all-init).
Mirror the hardware: when the X cursor wraps at the end of a row, advance Y
with a wrap at the active window boundary (yrange), honouring the data-entry
Y direction. Applied identically to the worker slave, the browser decoder,
and the Python golden reference so the three stay in lockstep. No regression
on the mono panels (their counter is re-seeked per plane, so the wrap is a
no-op for them); verified the tri-colour pill now renders red and the 2.9"
weather / 2.13" clock / 1.54" hello panels are unchanged.
ePaper panels rendered rotated/misaligned on AVR and RP2040 (e.g. the 2.13"
Pico clock came out sideways and clipped). The ESP32 worker decoder was just
taught to compose in the controller's native RAM geometry and rotate to the
display orientation, but the browser-side SSD168xDecoder (used by AVR/RP2040)
still composed at display dims with no rotation, so the two diverged.
- SSD168xDecoder.ts: port the worker's native-window compose + rotation.
* Size RAM to the longer side both ways so a rotated native layout
(128x296 behind a 296x128 panel) isn't truncated.
* Compose in the active RAM window, then rotate via the inverse of
Adafruit_GFX setRotation(1). Detect orientation by BYTE width so a
non-multiple-of-8 native width (the 2.13" panel is 122 px) is handled.
* Track the UNION of windows per frame: paged drivers (GxEPD2 page height
< panel) set one partial window per page, so compose must use the full
native area, not just the last page's strip. Fixes the all-white render
on paged panels (1.54" Uno, 4.2" Pico, 7.5" ESP32).
* Add an isBwr option: B/W panels treat 0x26 as a 2nd mono plane (white
only if both planes white), tri-colour panels keep red-wins.
* Default the active window to display geometry; the firmware overrides it.
- EPaperPart.ts: pass isBwr = cfg.palette === 'bwr' to the decoder.
- esp32_spi_slaves.py / esp32_worker.py: mirror the byte-aware rotation +
window-union in the worker, and derive is_bwr from panel_kind on the
runtime sensor_attach path too (fixes the tri-colour ESP32 alert badge).
- test_epaper/ssd168x_decoder.py: re-port the golden reference to match
(keeps the 3-way TS/Python/worker identity invariant). Tests updated to
construct tri-colour cases with is_bwr/palette='bwr'.
- examples-displays-epaper.ts: the Pico VCC wire referenced '3V3(OUT)',
which the velxio-pi-pico-w element doesn't expose (it has '3V3'), so the
wire snapped to the board corner. Use '3V3'.
ESP32 ePaper examples (e.g. epaper-2in9-esp32-weather) rendered as a blank
white panel. Two bugs, both above the SPI layer:
1. The worker's epaper_update event nested its payload under 'data', unlike
every other (flat) worker event. The backend qemu_callback re-wraps the
post-'type' payload under 'data', so the frontend received
msg.data.data.component_id (undefined) and EPaperPart bailed on
id !== componentId, so paintFrame/putImageData never ran. Emit it flat.
2. Ssd168xEpaperSlave was sized to the display dims (296x128), but GxEPD2
with setRotation(1) writes the controller's NATIVE RAM (128x296). The
_y < height bound dropped rows 128-295 (half the image) and compose
never rotated. Size RAM to the longer side, compose in the native
active-window geometry (0x44/0x45), then rotate to the display
orientation (inverse of Adafruit_GFX rotation 1). Add is_bwr (from
panel_kind): B/W panels init the 0x26 plane white and compose
white-only-if-both (GDEY029T94 mirrors the image into 0x26); tri-colour
panels keep red init 0x00 and red-wins.
- Implement UC8159cDecoder for handling 7-colour ACeP panels.
- Introduce painting functions for UC8159c frames in EPaperPart.
- Update EPaperPart to handle both SSD168x and UC8159c frame types.
- Add integration tests for EPaperPart and UC8159cDecoder.
- Create example sketch for 5.65" ACeP 7-colour panel.
- Enhance error handling in test cases for library dependencies.
- Introduced EPaperPanels.ts to define configurations for various ePaper panels including dimensions, refresh rates, and controller details.
- Implemented SSD168xDecoder.ts to handle the decoding of SPI commands for the SSD168x family of ePaper displays.
- Created EPaperPart.ts to manage the simulation of ePaper panels, integrating with the existing simulator architecture and handling events.
- Added example sketches for 2.13", 2.9", 4.2", and 7.5" ePaper displays, demonstrating basic functionality and text rendering.
- Ensured compatibility with AVR, RP2040, and ESP32 platforms, with appropriate pin configurations for each.
David Montero Crespo