velxio/frontend/src/__tests__/mixed-mode-bjt-switch-integration.test.ts

/**
 * Phase 1b end-to-end integration — real ngspice driving real
 * SpiceResolvedPinResolver subscribers.
 *
 * Scenario: Arduino pin 9 → 1k → BJT base; collector via 220Ω to 5V;
 * emitter to GND.  When pin 9 is HIGH (5V), the BJT saturates and the
 * collector pulls LOW; when pin 9 is LOW, the collector floats HIGH.
 * A SpiceResolvedPinResolver subscribed to "led:A" (whose net equals
 * the BJT collector net) must emit HIGH / LOW transitions tracking the
 * real SPICE solve.
 *
 * Coverage:
 *   - NetlistBuilder produces a usable netlist + pinNetMap
 *   - runNetlist (eecircuit-engine, real ngspice) solves it
 *   - connectLegacySolverToMixedModeFor publishes the voltages
 *   - SpiceResolvedPinResolver threshold-converts via AVR_HC family
 *
 * Skips the mock — this is the highest-confidence proof we can run in
 * a node test that the pipe doesn't have hidden conversion bugs.
 */
import { describe, it, expect, vi, afterEach } from 'vitest';
import { buildNetlist } from '../simulation/spice/NetlistBuilder';
import { runNetlist } from '../simulation/spice/SpiceEngine';
import {
  getMixedModeScheduler,
  __resetMixedModeScheduler,
} from '../simulation/spice/MixedModeScheduler';
import { connectLegacySolverToMixedModeFor } from '../simulation/spice/connectLegacySolverToMixedMode';
import {
  createSpiceResolvedPinResolver,
  configFromLogicFamily,
} from '../simulation/PinResolver';
import { FAMILIES } from '../simulation/LogicFamilies';
import type { BuildNetlistInput } from '../simulation/spice/types';

afterEach(() => {
  __resetMixedModeScheduler();
});

function bjtSwitchNetlist(pin9V: number): BuildNetlistInput {
  return {
    components: [
      { id: 'rb', metadataId: 'resistor', properties: { value: '1k' } },
      { id: 'rc', metadataId: 'resistor', properties: { value: '220' } },
      { id: 'q1', metadataId: 'bjt-2n2222', properties: {} },
      // 'led' isn't here — we model just the BJT and read its collector net.
      // Adding a real LED + V-sense would prove the same idea but makes the
      // assertion noisier.
    ],
    wires: [
      // Arduino 9 → Rb → BJT base
      { id: 'w1', start: { componentId: 'uno', pinName: '9' }, end: { componentId: 'rb', pinName: '1' } },
      { id: 'w2', start: { componentId: 'rb', pinName: '2' }, end: { componentId: 'q1', pinName: 'B' } },
      // 5V → Rc → BJT collector
      { id: 'w3', start: { componentId: 'uno', pinName: '5V' }, end: { componentId: 'rc', pinName: '1' } },
      { id: 'w4', start: { componentId: 'rc', pinName: '2' }, end: { componentId: 'q1', pinName: 'C' } },
      // BJT emitter → GND
      { id: 'w5', start: { componentId: 'q1', pinName: 'E' }, end: { componentId: 'uno', pinName: 'GND' } },
    ],
    boards: [
      {
        id: 'uno',
        vcc: 5,
        pins: {
          '5V': { type: 'digital', v: 5 },
          GND: { type: 'digital', v: 0 },
          '9': { type: 'digital', v: pin9V },
        },
        groundPinNames: ['GND'],
        vccPinNames: ['5V'],
      },
    ],
    analysis: { kind: 'op' },
  };
}

/** Solve, then return the (nodeVoltages, pinNetMap) snapshot in the shape
 *  connectLegacySolverToMixedModeFor expects. */
async function solveAndSnapshot(input: BuildNetlistInput): Promise<{
  nodeVoltages: Record<string, number>;
  pinNetMap: Map<string, string>;
}> {
  const { netlist, pinNetMap } = buildNetlist(input);
  const result = await runNetlist(netlist);
  const nodeVoltages: Record<string, number> = {};
  for (const name of result.variableNames) {
    const m = name.toLowerCase().match(/^v\((.+)\)$/);
    if (!m) continue;
    nodeVoltages[m[1]] = result.dcValue(name);
  }
  return { nodeVoltages, pinNetMap };
}

describe('Mixed-mode end-to-end — BJT switch with real ngspice', () => {
  it(
    'SpiceResolvedPinResolver emits LOW when BJT is saturated (pin 9 HIGH)',
    { timeout: 30_000 },
    async () => {
      const scheduler = getMixedModeScheduler();
      const snapshot = await solveAndSnapshot(bjtSwitchNetlist(5));

      // Wire the legacy solver's output into the scheduler.
      const store = {
        getState: () => snapshot,
        subscribe: () => () => {},
      };
      connectLegacySolverToMixedModeFor(store, scheduler);

      // Resolver for "q1:C" — the BJT collector pin.
      const resolver = createSpiceResolvedPinResolver(
        'q1',
        'C',
        scheduler,
        configFromLogicFamily(FAMILIES.AVR_HC),
      );
      const cb = vi.fn();
      resolver.onChange(cb);

      // BJT saturated → Vc ≈ Vce(sat) ≈ 0.1–0.3 V, well below AVR_HC vil=1.0V → LOW.
      expect(resolver.getCurrentState()).toBe('LOW');
      expect(resolver.getCurrentVoltage()).toBeLessThan(1.0);
    },
  );

  it(
    'SpiceResolvedPinResolver emits HIGH when BJT is cut off (pin 9 LOW)',
    { timeout: 30_000 },
    async () => {
      const scheduler = getMixedModeScheduler();
      const snapshot = await solveAndSnapshot(bjtSwitchNetlist(0));
      const store = {
        getState: () => snapshot,
        subscribe: () => () => {},
      };
      connectLegacySolverToMixedModeFor(store, scheduler);

      const resolver = createSpiceResolvedPinResolver(
        'q1',
        'C',
        scheduler,
        configFromLogicFamily(FAMILIES.AVR_HC),
      );

      // BJT cut off → Vc ≈ 5V (no current through Rc) → above AVR_HC vih=3.0V → HIGH.
      expect(resolver.getCurrentVoltage()).toBeGreaterThan(3.0);
      expect(resolver.getCurrentState()).toBe('HIGH');
    },
  );
});