From 0885796a8ff8628a35042c67e8f57cc4f79d33fe Mon Sep 17 00:00:00 2001
From: yOPERO <yopero666@gmail.com>
Date: Mon, 27 May 2013 11:35:09 +0300
Subject: [PATCH] Create motor_stand_2_screw_terminals.scad

---
 .../Y_axis/motor_stand_2_screw_terminals.scad | 177 ++++++++++++++++++
 1 file changed, 177 insertions(+)
 create mode 100644 Hardware/Y_axis/motor_stand_2_screw_terminals.scad

diff --git a/Hardware/Y_axis/motor_stand_2_screw_terminals.scad b/Hardware/Y_axis/motor_stand_2_screw_terminals.scad
new file mode 100644
index 0000000..7f1aa73
--- /dev/null
+++ b/Hardware/Y_axis/motor_stand_2_screw_terminals.scad
@@ -0,0 +1,177 @@
+// Cyclone PCB Factory: a 3D printable CNC machine for PCB manufacture
+// Created by Carlosgs (http://carlosgs.es)
+// License: Attribution - Share Alike - Creative Commons (http://creativecommons.org/licenses/by-sa/3.0/)
+
+use <../libs/obiscad/bcube.scad>
+use <../libs/build_plate.scad>
+
+bottom_thickness = 4;
+base_width = 20;
+base_length = 25;
+base_screw_diameter = 5;
+
+motor_width = 43;
+motor_length = 49; // not used
+motor_screw_distance = 31.3;
+motor_center_diameter = 23;
+
+motor_screw_diameter = 3.7;
+motor_screw_head_diameter = 8;
+
+bearing_diameter = 22.4;
+M8_rod_diameter = 8.2;
+axis_distance = 32;
+
+wall_thickness = 5;
+wall_height = 45;
+wall_width = 90;
+
+idler_width = 25;
+
+module motor_stand_no_base(with_motor=true) {
+difference() {
+
+  translate([wall_height/2,wall_width/2,wall_thickness/2])
+    
+    bcube([wall_height,wall_width,wall_thickness],cr=4,cres=10);
+      // Position relative to motor shaft
+    translate([motor_width/2,motor_width/2,wall_thickness/2]) {
+    if(with_motor) {
+    // Hole for the motor shaft
+    translate([0,-wall_width/2,0])
+      cube([20,wall_width,10*wall_thickness],cr=4,cres=10,center=true);
+    cylinder(r=motor_center_diameter/2,h=10*wall_thickness,center=true,$fn=40);
+
+    // Screws for holding the motor
+    for(i=[-1,1]) for(j=[-1,1])
+    translate([i*motor_screw_distance/2,j*motor_screw_distance/2,0]) {
+      cylinder(r=motor_screw_diameter/2,h=10*wall_thickness,center=true,$fn=40);
+      cylinder(r=motor_screw_head_diameter/2,h=10*wall_thickness,center=false,$fn=40);
+    }
+    } // End if with motor
+
+    // Bearing holes
+    rotate([0,0,15]) translate([0,axis_distance,0]) {
+      cylinder(r=(M8_rod_diameter*2)/2,h=10*wall_thickness,center=true,$fn=40);
+      cylinder(r=bearing_diameter/2,h=10*wall_thickness,center=false,$fn=60);
+
+    }
+
+  } // End of translate relative to motor shaft
+} // End of difference
+
+}
+
+module motor_stand(with_motor=true) {
+  union() {
+    #motor_stand_no_base(with_motor);
+    difference() {
+      union() {
+        translate([wall_height-bottom_thickness,wall_width-base_width]) {
+          cube([bottom_thickness,base_width,base_length]);
+          hull() {
+            cube([bottom_thickness,5,base_length]);
+            translate([-18,0,0])
+              cube([0.001,5,0.001]);
+          }
+        }
+      }
+      // --- screws for the base ---
+      translate([wall_height,wall_width-5,15])
+        rotate([0,90,0]) {
+          translate([-5,0,0])
+            cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=6);
+          translate([5,0,0])
+            cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=6);
+        }
+
+    } // End of difference
+  }
+}
+
+
+module idle_stand() {
+  intersection() { // Remove the motor part
+    motor_stand(with_motor=false);
+    translate([wall_height/2,wall_width/2+35,wall_thickness/2])
+      bcube([wall_height,wall_width,100],cr=4,cres=10);
+  }
+}
+
+//for display only, doesn't contribute to final object
+build_plate(3,200,200);
+union(){
+cuerpo_extra();
+pata_extra();
+motor_stand();
+relleno();
+translate([45,0,0])
+ mirror([]){
+  relleno();
+  }
+}
+module relleno(){
+  translate([0,-5,0])
+  cube([4.5,2+5,5]);
+  cube([1,5,5]);
+
+}
+  
+  
+    
+  
+
+
+
+
+
+//idle_stand();
+module motor_stand1(with_motor=true) {
+  union() {
+    //motor_stand_no_base(with_motor);
+    difference() {
+      union() {
+        translate([wall_height-bottom_thickness,wall_width-base_width]) {
+          cube([bottom_thickness,base_width,base_length]);
+          hull() {
+            cube([bottom_thickness,5,base_length]);
+            translate([-18,0,0])
+              cube([0.001,5,0.001]);
+          }
+        }
+      }
+      // --- screws for the base ---
+      translate([wall_height,wall_width-5,15])
+        rotate([0,90,0]) {
+          translate([-5,0,0])
+            cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=6);
+          translate([5,0,0])
+            cylinder(r=base_screw_diameter/2,h=100,center=true,$fn=6);
+        }
+    } // End of difference
+
+  }
+
+}
+module extra(){
+  union(){
+    pata_extra();
+    cuerpo_extra();
+  }
+}
+module cuerpo_extra(){
+
+  translate([45/2,20/2-20,5/2])
+  bcube([45,20,5],,cr=4,cres=10);
+
+}
+module pata_extra(){
+
+    mirror([0,0,1]){
+    rotate([-180,0,0]){
+      translate([0,-70,0])
+      motor_stand1();
+    }
+  }
+    }
+